Commit Graph

3594 Commits

Author SHA1 Message Date
Andrew Tridgell cc8278c1ac DCM: got rid of _error_roll_pitch from object state
this can be a local error variable in common with the yaw code. This
saves 12 bytes in the object.
2012-03-10 10:34:27 +11:00
Michael Oborne 986f1675ad APM Planner 1.1.50
rename messagebox to custommessagebox
mag calibration now working. > hardware setup tab
2012-03-09 23:18:12 +08:00
Jason Short 486c56ce41 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short c8e9d57567 temp remove filter for quad motors during testing. It's unlikely this filter did anything at all to be honest. 2012-03-06 22:23:06 -08:00
Jason Short 730476fdfd ACM -
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
2012-03-06 22:22:14 -08:00
Jason Short c26eb6afcc ACM: Updated config values 2012-03-06 22:12:24 -08:00
Jason Short e57b91c2e2 Updated on Barometer - increased the Temp filtering and decreased the pressure filtering to and get less temp noise, faster response from pressure. I'm filtering the Climb rate differently now, so this higher pressure noise should not hurt the derivative calcs at all now. 2012-03-06 20:55:35 -08:00
Michael Oborne f1d67c5638 APM Planner
Fix Updater
2012-03-07 08:01:59 +08:00
rmackay9 8b256cf924 ArduCopter - fix for stability patch and motor filter meant to deal with engines tendency to speed up faster than they slow down 2012-03-06 23:20:30 +09:00
rmackay9 72a775cc2a ArduCopter - fixed typo in motor filtering for octa, octa_quad and y6 that is suppose to correct for props speeding up faster than they slow down. 2012-03-06 22:19:19 +09:00
rmackay9 706bea5992 ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Michael Oborne 7f47640b92 APM Planner 1.1.49
mode TUNE_ param scale
add mavlink tlog graphing
mod tracker options
2012-03-06 18:27:43 +08:00
Jason Short 46d7da4d14 Added define for throttle range for altitude changes, updated it to 250 2012-03-05 22:12:53 -08:00
rmackay9 6c3cf9ad5b AP_RC - removed unused library 2012-03-04 18:21:52 +09:00
Michael Oborne 444f29410b planner cleanup 2012-03-04 08:49:45 +08:00
Michael Oborne ba3ffb3b8b APM Planner 1.1.48
Add ThemeManager - re andrew
Add CustomMessageBox - re andrew and me
few mono fixs
mono tts working (speech)
2012-03-04 08:42:42 +08:00
Robert Lefebvre a480b32400 Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled.
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
2012-03-03 08:14:14 -05:00
Michael Oborne 0087d0533a APM Planner 1.1.47
fix Updater
2012-03-03 15:42:41 +08:00
Michael Oborne c2fa44d24e APM Planner 1.1.46
update to request extra3 stream.
2012-03-02 18:40:20 +08:00
Andrew Tridgell 73dafe537e SITL: use the new noise model
use the new noise model at a low level for master until we sort out
DCM noise handling
2012-03-02 18:31:07 +11:00
Andrew Tridgell 0ff44563ec ACM: use g.rc_speed for all APM_RC.SetFastOutputChannels calls 2012-03-02 17:57:08 +11:00
Andrew Tridgell 0fc646d666 ACM: set default RC fast speed to 400Hz 2012-03-02 17:57:08 +11:00
Andrew Tridgell e213f6780e ACM: added RC_SPEED MAVLink parameter
this will set the speed for APM_RC.SetFastOutputChannels()
2012-03-02 17:57:08 +11:00
Andrew Tridgell 5f749325f0 APM_RC: allow the fast RC speed to be passed as a parameter
this will allow users to test different speeds
2012-03-02 17:57:08 +11:00
Andrew Tridgell f781bd735b ACM: fixed Parameters.h to avoid duplicate keys
unfortunately everyone needs to reload
2012-03-02 15:48:28 +11:00
Andrew Tridgell f4329d2680 AP_Param: ensure we can't have duplicate keys in Parameters.h
this is O(n^2), but only at startup, and takes less than 1ms to run.
It catches a very nasty coding error
2012-03-02 15:48:28 +11:00
Andrew Tridgell cb874d6097 ACM: added board_voltage() 2012-03-02 15:48:28 +11:00
Andrew Tridgell b20084af7d APM: added board_voltage() function 2012-03-02 15:48:27 +11:00
Andrew Tridgell 1e8d98cdda I2C: added lockup_count() interface
used for reporting I2C problems
2012-03-02 15:48:27 +11:00
Andrew Tridgell 37275d229d SITL: implement cli()/sei() properly for desktop build
this disables simulated hardware interrupts during critical sections
2012-03-02 15:48:27 +11:00
Robert Lefebvre e49c2d2871 Rescale TradHeli roll_out and pitch_out into the min and max ranges to provide linear motion across the input range instead of stopping when the input hits the constrain value. These calculations are based on an assumption of the user specified roll_max and pitch_max coming into this equation at 4500 or less, and based on the original assumption of the total g.heli_servo_x.servo_out range being -4500 to 4500.
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
2012-03-01 22:04:50 -05:00
Michael Oborne ee5e331f3c APM Planner 1.1.45
add tcp and udp port remeber issue 533
add udp listern wait issue 534
fix wp receive on mono part issue 530
allow logging of unknown packets mav 0.9
do_speed_change fix issue 531
remember last video res issue 521
fix issue 528 - ch 6 and ch 7 options
2012-03-01 21:27:03 +08:00
Jason Short 41b435a487 Updated fastPWM to 490Hz 2012-02-29 22:17:38 -08:00
Pat Hickey 337af0c7a2 AP_Param: nested group recursion into next_group disableable by macro
* c.f. 0251932c81fe7eb, e5515bb6ef82
2012-02-29 19:48:43 -08:00
Pat Hickey 2648694489 AP_Param: One more nexted group recursion disableable by macro
* c.f. e5515bb6ef82
2012-02-29 18:48:54 -08:00
rmackay9 fa34ac076e AP_Compass - fixed compile warning 2012-02-29 22:57:35 +09:00
rmackay9 19f5719e59 Merge remote-tracking branch 'origin/master' 2012-02-29 22:48:02 +09:00
rmackay9 d81c951849 AP_Baro - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:46:29 +09:00
rmackay9 c819a0f68a AP_Compass - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:45:49 +09:00
rmackay9 5026b5c192 AP_DCM - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:45:26 +09:00
rmackay9 82f81295a7 RC_Channel - fixed small compiler warning 2012-02-29 22:44:29 +09:00
rmackay9 c444cdb3f4 AP_ADC - removed small compiler warning 2012-02-29 22:43:46 +09:00
Michael Oborne a5e3f8d324 APM Planner 1.1.44
mod antenna tracker code
add extra ch 6 options
cleanup message dialogs better
fix auto fill ch6 and ch7 mode options
add progress to upload and dl wp's
fix disconnect bug on mono
2012-02-29 21:19:54 +08:00
Jason Short 7c09e4a5e6 added stab_d gain scheduling - off by default 2012-02-28 20:16:40 -08:00
Jason Short a387956814 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short ceef8070ac added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short b76c4ecb22 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short efdf6ee79f added option for stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short ca34d7b7c2 Added test for stab_d gain scheduling. 2012-02-28 20:16:40 -08:00
Pat Hickey 16ed16f403 Cleanup: rm ArduCopter/GCS_Mavlink\ copy.txt
* Not needed, but we can always checkout an old version if it is.

Hi Pat,
This may have been my WIP for the Mavlink 1.0 conversion. I tried to
give Tridge a head start on it. I've made small updates to it in
parallel to the current Mavlink. You can delete it as he would have used
it by now if he felt it was helpful.

Jason

On Feb 28, 2012, at 4:08 PM, Pat Hickey wrote:

It looks like this file was checked in by accident, possibly, but you've
made a few small changes to it since creating it.

Is it important? Should we get rid of it?

Git log of file below.

Thanks
Pat
...
2012-02-28 16:28:27 -08:00