Andrew Tridgell
cc1961b1e8
Math: any euler angle with pitch > 90 is invalid
...
both DCM and quaternion always return pitch in the range -90 to 90
2012-03-11 15:37:07 +11:00
Andrew Tridgell
36e92bf4ba
Quaternion: update for new Quaternion interface
2012-03-11 15:37:07 +11:00
Andrew Tridgell
eea63ecd6e
DCM: update for new Matrix3f interface
2012-03-11 15:37:07 +11:00
Andrew Tridgell
01535a7a21
AP_Math: update the test suite
2012-03-11 15:37:07 +11:00
Andrew Tridgell
6d08e38d5d
AP_Math: made rotation matrices more C++
...
thanks to Adam for the suggestion
2012-03-11 15:37:07 +11:00
Andrew Tridgell
92ada85f49
AP_Math: allow null pointers in Quaternion::to_euler()
...
this matches the Matrix3f method
2012-03-11 15:37:07 +11:00
Andrew Tridgell
18fcb14335
Quaternion: use the new quaternion API
2012-03-11 15:37:07 +11:00
Andrew Tridgell
a9b8c4dd82
AP_Math: re-work quaternion functions to be more C++ like
...
thanks to Adam for the suggestion!
2012-03-11 15:37:07 +11:00
Andrew Tridgell
ea0fb311af
I2C: fixed cr/lf mess
2012-03-11 15:37:07 +11:00
Andrew Tridgell
5203df2cf8
OpticalFlow: adapt optical flow library to new rotation system
2012-03-11 15:37:07 +11:00
Andrew Tridgell
7aa6ba2c86
OpticalFlow: fixed line endings
...
this library was a mixture of dos and unix line endings, which makes
for very messy editing
2012-03-11 15:37:07 +11:00
Andrew Tridgell
3c145ab61c
Compass: update the compass driver to use the new vector.rotate() method
2012-03-11 15:37:07 +11:00
Andrew Tridgell
24a9fe8827
Math: added a test suite for the new rotation methods
2012-03-11 15:37:07 +11:00
Andrew Tridgell
85c3c1d2ea
Math: added vector3.rotate() and matrix3.rotation() methods
...
these operate on a "enum Rotation" which defines a set of standard
rotations. These are much faster than our previous method, plus use
less memory
2012-03-11 15:37:07 +11:00
Jason Short
8b887b77bd
ACM: Added Loiter D tuning
2012-03-10 14:17:57 -08:00
Jason Short
7b2b5e858e
ACM: Added Loiter_D for tuning as #23
2012-03-10 14:17:16 -08:00
Jason Short
149a484984
ACM: Firmware rev
2012-03-10 12:45:03 -08:00
Jason Short
a9e7194e3d
ACM: disabled auto_calibration until more testing can be done
2012-03-10 12:44:49 -08:00
Jason Short
3c1f4b1ad7
ACM: changed alt hold initialization of altitude to be immediate
2012-03-10 12:44:18 -08:00
Jason Short
68d210660e
ACM: Added note about scaling rates
2012-03-10 12:43:28 -08:00
Jason Short
4b75f74d2c
ACM: Altered the scaling speed for altitude changes for faster rises.
2012-03-10 12:43:01 -08:00
Jason Short
874f5aaef6
ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes.
2012-03-10 12:42:22 -08:00
Jason Short
9f47a79a3a
ACM: decreased rate P for alt hold to remove bumpy repsonse
2012-03-10 12:41:06 -08:00
Jason Short
11e5f7d40f
ACM: Increased the altitude error P for smoother alt hold response
2012-03-10 12:40:44 -08:00
Jason Short
20a3cfdcde
decreased the loiter rate P for overshoot
2012-03-10 12:40:07 -08:00
Jason Short
bb56cea1ac
ACM: increased the available rate error constrain, it was too low
2012-03-10 12:39:16 -08:00
Jason Short
285f2dd791
ACM: removed the experiment for rate error.
2012-03-10 12:38:29 -08:00
Jason Short
0ccfdc664d
added Force_new_altitude call for alt hold
2012-03-10 12:37:54 -08:00
Jason Short
037221cd02
upped throttle manual boost to 225
2012-03-10 12:37:28 -08:00
rmackay9
9986776e0d
ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde
2012-03-11 01:27:58 +09:00
rmackay9
a72b20f42d
ArduCopter - fix to dataflash logging of Mag heading
2012-03-11 01:27:29 +09:00
Andrew Tridgell
a30b03cd0a
SITL: lower the noise and drift levels for general autotest usage
2012-03-10 10:34:34 +11:00
Andrew Tridgell
07e8360970
InertialSensor: fixed HIL build
2012-03-10 10:34:34 +11:00
Andrew Tridgell
6d06d9d070
MAVLink: bring the v1.0 MAVLink in sync with 0.9
2012-03-10 10:34:34 +11:00
Andrew Tridgell
fed5426274
DCM: after some experimentation, raise the ki values a bit
...
this tracks the max gyro drift more accurately
2012-03-10 10:34:34 +11:00
Andrew Tridgell
89b4a9f4ed
Quaternion: use gyro drift value from sensor driver
2012-03-10 10:34:34 +11:00
Andrew Tridgell
fd74414884
Quaternion: go back to the full update_MARG()
...
the separate drift controller is too erratic on yaw hold to be usable
at the moment
2012-03-10 10:34:34 +11:00
Andrew Tridgell
1002bbcbfe
SITL: cleanup the gyro drift calculations
...
use units that are more easily understood
2012-03-10 10:34:34 +11:00
Andrew Tridgell
ad21913605
Quaternion: make the quaternion test more generic
...
works with DCM too
2012-03-10 10:34:33 +11:00
Andrew Tridgell
a889135e78
Quaternion: update to get_gyro_drift() interface
2012-03-10 10:34:33 +11:00
Andrew Tridgell
e0cc9c93a1
Quaternion: removed some unused variables
2012-03-10 10:34:33 +11:00
Andrew Tridgell
f39d8dbde8
GCS: get_integrator() is now get_gyro_drift() in DCM
2012-03-10 10:34:33 +11:00
Andrew Tridgell
b67b0afd10
DCM: separate out the omega_yaw_P from omega_P
...
this cleans up the separation of drift rates and proportional
correction from yaw source and accelerometers, allow the yaw
to run at a different rate to the accel correction
2012-03-10 10:34:33 +11:00
Andrew Tridgell
f4b1dae7cf
IMU: added get_gyro_drift_rate() interface
...
this just calls down to the InertialSensor layer
2012-03-10 10:34:33 +11:00
Andrew Tridgell
f46fba54dc
AP_InertialSensor: added a get_gyro_drift_rate() interface
...
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
Andrew Tridgell
9e07fa3af6
DCM: removed the limit on linear acceleration
...
we get linear accelerations of more than 1g when turning corners
2012-03-10 10:34:33 +11:00
Andrew Tridgell
4f739ea28f
make 'ENABLE' and 'ENABLED' mean the same things
...
users get this wrong far too often!
2012-03-10 10:34:33 +11:00
Andrew Tridgell
ab1aec0f77
Quaternion: minor tuning
2012-03-10 10:34:33 +11:00
Andrew Tridgell
e470bf2354
DCM: minor tuning based on testing my quad
2012-03-10 10:34:33 +11:00
Andrew Tridgell
97faa47ba6
SITL: make the yaw match the APM conventions
2012-03-10 10:34:33 +11:00