Andrew Tridgell
cb88681914
APM: added support for MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN
...
this allows for remote reboot of APM
2012-09-10 11:42:30 +10:00
Andrew Tridgell
e2779523ea
APM: fixed fetch of relative altitude waypoints
...
when we fetch relative altitude waypoints from APM to a file, we need
to preserve the altitude
2012-09-10 09:40:29 +10:00
Craig Elder
90b74f5bab
APM_RC: fixed noisy PWM output on startup for APM2
...
This reduces the number of rubbish pulses on the APM2 PWM output pins
on startup, which should help with booting some cheaper ESCs.
Thanks to Randy for the idea!
2012-09-10 08:09:28 +10:00
rmackay9
5d3ddf1fc9
ArduCopter: bug fix for ROI not working if user did not have a camera mount
...
Changed verify_nav_roi command to attempt to point at the target if our camera mount type is not pan_tilt nor pan_tilt_roll
2012-09-10 02:03:32 +09:00
Michael Oborne
a32002e14b
firmware build
2012-09-09 18:09:07 +08:00
Andrew Tridgell
feb3fe77ce
APM: simplify radio_trim code
...
this removes the duplicate code. Throttle trim is not changed.
2012-09-09 19:39:09 +10:00
Andrew Tridgell
5c3595e0dc
APM: fixed throttle nudging
...
The nudge value depended on RC3_TRIM, which is not a reliable
value. It tried to only take effect when the throttle stick was above
50%, but if RC3_TRIM was high for some reason (say 1500) then it would
actually depress the throttle by a large amount, which could cause the
plane to stall.
This also adds a boolean option THROTTLE_NUDGE to allow disabling of
throttle nudging
2012-09-09 19:39:04 +10:00
Andrew Tridgell
657dd5969f
APM: preparing for 2.61 release
2012-09-08 18:36:17 +10:00
Andrew Tridgell
6e15aa68b8
Rover: updated for new RC_Channel_aux API
2012-09-08 15:14:41 +10:00
Andrew Tridgell
49468953a3
APM: updated for new RC_Channel_aux API
2012-09-08 15:14:41 +10:00
Andrew Tridgell
4c07add542
AP_Camera: updated for new RC_Channel_aux API
2012-09-08 15:13:06 +10:00
Andrew Tridgell
f41270a3ce
AP_Mount: updated for new RC_Channel_aux API
2012-09-08 15:12:52 +10:00
Andrew Tridgell
3b97339104
RC_Channel: simplified RC_Channel_aux and fixed issue 725
...
it is perfectly valid to configure two RC channels with the same
function, especially when that function is manual output (ie. copy
input to output)
This removes the g_rc_function[] indirection array
2012-09-08 15:12:28 +10:00
Andrew Tridgell
a6422be8fb
APM: added mtk and mtk16 build targets
...
useful for testing non-auto gps detection
2012-09-08 12:43:36 +10:00
Andrew Tridgell
f26b9ab286
APM: prevent crosstrack from takeoff point after takeoff completion
2012-09-08 11:37:14 +10:00
Andrew Tridgell
dec12c7370
APM: use ahrs.airspeed_estimate() in two more places
...
this applies the wind constraint
2012-09-08 11:37:11 +10:00
Andrew Tridgell
de28cc8b28
AHRS: added AHRS_WIND_MAX option
...
this allows APM to cope better with airspeed sensor failure, but
ensuring airspeed stays within AHRS_WIND_MAX of ground speed
2012-09-08 11:37:07 +10:00
Andrew Tridgell
8458607928
APM_OBC: changed termination servo values, and added loop counter
2012-09-08 11:37:00 +10:00
Andrew Tridgell
cde7d8c5e7
APM: fixed some compiler warnings
2012-09-08 10:14:32 +10:00
Andrew Tridgell
d07d42403e
APM: tidy up an if() statement
2012-09-08 10:14:20 +10:00
Andrew Tridgell
fa84ba451a
APM_OBM: Failsafe board sketch
...
this combines with the OBC failsafe module
2012-09-08 10:07:17 +10:00
Andrew Tridgell
cca04d195a
APM_OBC: handle separate terminate pin correctly
2012-09-08 10:07:14 +10:00
Andrew Tridgell
13145e4c01
OBC: added FS_TERM_PIN option
...
this sets a pin for flight termination
2012-09-08 10:07:08 +10:00
Andrew Tridgell
164c60d25f
APM: added RUDDER_STEER option
...
when enabled, this uses only the rudder to steer during takeoff and
landing, using aileron only for levelling
2012-09-08 10:07:03 +10:00
Andrew Tridgell
130b26e1f9
APM: support DO_SET_SERVO command
2012-09-08 10:06:53 +10:00
Andrew Tridgell
96ea350143
APM: added XTRK_MIN_DIST option
...
this allows you to disable crosstrack correction on short legs
2012-09-08 10:06:44 +10:00
Andrew Tridgell
a446a7a9ed
APM: allow serial buffer size to be configured
...
very useful for packet forwarding setups
2012-09-08 10:06:35 +10:00
Andrew Tridgell
3a1ff7bdd9
Mavlink: enable MAVLINK_SEPARATE_HELPERS
...
this fixes a seq number problem with SIMSTATE packets
2012-09-08 10:06:19 +10:00
Andrew Tridgell
9b2ad55773
APM: added forwarding of unknown MAVLink types
2012-09-08 10:06:15 +10:00
Andrew Tridgell
f97104b435
ACM: use compass.accumulate() in ArduCopter
...
this gives us a much less noisy magnetometer
2012-09-08 10:06:04 +10:00
Andrew Tridgell
68705fe7e6
APM: accumulate mag readings during spare cycles in ArduPlane
...
With this change we average over 100 mag readings per compass.read()
call, which means we are reading the compass at over 1kHz instead of
10Hz. The noise reduction is huge.
2012-09-08 10:05:58 +10:00
Andrew Tridgell
6922dcdea2
Compass: added compass.accumulate() API
...
this allows us to accumulate mag readings using spare CPU cycles
2012-09-08 10:05:54 +10:00
Michael Oborne
cd08420c3e
AP fix takeoff alt issue
...
issue 733
2012-09-06 20:19:12 +08:00
Michael Oborne
c1235c55d5
Fix Approach Altitude min
2012-09-06 17:43:58 +08:00
Pat Hickey
b02340fe10
APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE
2012-09-05 15:36:57 -07:00
Michael Oborne
864d777856
Mission Planner 1.2.11
...
Fix ac crosstrack display
tweak ap_mount
speed up Terminal
2012-09-04 06:46:56 +08:00
Michael Oborne
d3e5746993
firmware build
2012-09-02 13:34:03 +08:00
Michael Oborne
38942a1ea6
firmware build
2012-09-02 13:05:33 +08:00
rmackay9
5073e56c06
ArduCopter: upgraded firmware version to 2.7.3
2012-09-02 12:58:16 +09:00
rmackay9
c9d34c1737
ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2.
...
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
2012-09-02 12:51:23 +09:00
rmackay9
9013d9be43
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
2012-09-02 12:47:27 +09:00
rmackay9
5994117f6f
RC_Channel_aux: bug fix which could cause channel to be assigned to the wrong function and miss others
2012-09-02 12:46:04 +09:00
Michael Oborne
6501310745
firmware build
2012-09-01 20:10:02 +08:00
Craig Elder
274b2e2143
Arducopter: Release 2.7.2
2012-08-31 19:18:10 -07:00
Michael Oborne
f4334c9aaf
Mission Planner 1.2.10
...
add useritems to HUD
change hdop scale
fix posible follow me bug (, vs .)
fix posible friendly params bug (, vs .)
tweak flightdata log playback timming
fix gridv2 bug. if no waypoint had been done, the grid wold fail
tweak some mission upload potential issues
add ability to get param list from a log (from startup)
add ability to get the first wp list in a log, if wps where received in that log.
tweak video capture library timing
2012-08-30 20:51:29 +08:00
Andrew Tridgell
83153eebd4
APM: obey pitch limits in FBWA as well
...
this means pitch limits are constrained by LIM_PITCH_MIN and
LIM_PITCH_MAX
2012-08-30 20:15:42 +10:00
Andrew Tridgell
9a987ce116
APM: fixed docs for LIM_PITCH_MIN
2012-08-30 14:55:08 +10:00
Michael Oborne
1e7adac365
AP fix attitude hil.
...
we where waiting on new_data that had no way of getting there.
2012-08-30 07:54:20 +08:00
Andrew Tridgell
97aa98015d
Rover: added TELEM_DELAY to rover code
2012-08-30 09:36:18 +10:00
Andrew Tridgell
e8d928cca4
ACM: added TELEM_DELAY to ArduCopter
2012-08-30 09:03:01 +10:00