rmackay9
5cb4a88292
ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered)
2012-07-28 23:05:05 +09:00
rmackay9
670a66667f
ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing)
2012-07-28 16:22:35 +09:00
rmackay9
014f5aae99
ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP
2012-07-28 14:21:07 +09:00
Michael Oborne
f4705577c8
AC fix sitl attitude hil build
2012-07-24 21:18:36 +08:00
Andreas M. Antonopoulos
80cf794c86
AC: ArduCopter 2.7 release candidate - updated THISFIRMWARE constant.
2012-07-21 17:52:06 -07:00
Jason Short
b17eb7f768
ACM: Fixed Baro rate patch to work with Sonar and added simple filter
2012-07-21 16:45:00 -07:00
Jason Short
9f6e1347b6
Ardcucopter: RTL distance check update, reset I terms fixed.
2012-07-20 13:27:35 -07:00
Jason Short
2b20c85279
Arducopter: cleanup, skip out of throttle control when flipping.
2012-07-19 22:35:21 -07:00
Jason Short
91062b56af
Arducopter.pde: Increased the throttle Hold altitude control
...
simplified Yaw reset
2012-07-19 17:38:25 -07:00
Jason Short
1efc9eac58
Arducopter: Adjust landing speed
...
removed commented out calc_loiter_pitch_roll calls
Changed updateRTL to use 1m be default instead of wp_radius to avoid poor loiter entry speed.
2012-07-19 09:48:31 -07:00
Jason Short
c9851344e7
Arducopter
...
removed old Var
2012-07-18 22:57:10 -07:00
Jason Short
cb1cdcd4a7
Arducopter: New Alt control code
...
Uses a new method to manage altitude changes. Alt hold controller was split into a hold and a rate controller just like navigation. Changing alt is done by specifying a climb rate.
Interactive alt hold is now simplified and is an 80cm climb or descent.
2012-07-18 22:57:10 -07:00
Jason Short
5965632888
Arducopter: Flip mode
...
Flip mode graduates to pre-compiled option
2012-07-18 22:57:10 -07:00
rmackay9
b691c3f658
ArduCopter.pde: added call to set_manual_rc_channel to allow pilot's channel 6 to control pitch.
...
This initialisation code should be moved to init_ardupilot and/or into the AP_Mount library.
2012-07-18 23:49:09 +09:00
Andreas M. Antonopoulos
a976a59c88
AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling.
2012-07-16 11:46:43 -07:00
rmackay9
c495a5f36e
ArduCopter: added enable_out_ch and output_ch calls for rc_camera_roll, pitch and yaw servos so they actually move
2012-07-15 16:38:28 +09:00
Andreas M. Antonopoulos
c73f7ef3ab
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Jason Short
e3af0c7920
Arducopter: Yaw stop fix
2012-07-14 12:23:10 -07:00
Robert Lefebvre
59e133235f
Implementing Yaw Fix. Tried to blend with Jason's changes.
2012-07-14 00:24:22 -04:00
Jason Short
4af392290b
Circle_WP: Fix for Yaw toward center, fix for transit to Circle WP from a distance
2012-07-13 19:29:36 -07:00
Jason Short
7b746cf5e1
Arducopter: Wrong define used, caused Copter to Yaw to home when flying missions
2012-07-13 12:51:38 -07:00
Jason Short
d8ff5dcfab
Arducopter: Fix circle_WP
2012-07-12 09:22:20 -07:00
Jason Short
293f17902b
Arducopter:Arducopter.pde
...
switched over to barometer.get_climb_rate() * 100
removed +home.alt calcs since home is always 0 altitude
2012-07-10 21:53:38 -07:00
Jason Short
3048d2f9b4
Arducopter: WP_radius
...
Switching to stored WP_radius in meters, just like Arduplane
2012-07-10 21:53:38 -07:00
Amilcar Lucas
dfe0983e1e
Merge the changes from APM_Camera branch into ArduCopter
...
Conflicts:
ArduCopter/Camera.pde
ArduCopter/Parameters.pde
2012-07-11 00:39:13 +02:00
Jason Short
f019d41729
arducopter.pde
...
Timer was set =0 at initialization.
2012-07-09 13:13:32 -07:00
Jason Short
8ccda519fa
Arducopter.pde:
...
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
2012-07-03 17:21:46 -07:00
Jason Short
e0b3309500
Yaw mode:
...
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
2012-07-01 13:40:12 -07:00
Jason Short
c5617eeeac
Arducopter.pde_RTL:
...
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
2012-07-01 13:40:11 -07:00
Jason Short
2e8eee9306
Added code for self centering throttle - disabled by default.
2012-07-01 13:40:11 -07:00
Jason Short
4d6ccccef5
Circle_WP distance check fix
2012-06-29 21:20:28 -07:00
Jason Short
668135ea8b
Arducopter.pde: Added Toy mode refinements
2012-06-29 21:20:27 -07:00
Jason Short
e036bee424
Aeducopter.pde: Toy mode updates
2012-06-29 21:20:27 -07:00
Andrew Tridgell
55092c25a6
SITL: enable the SIM_* parameters in ArduCopter and ArduPlane
2012-06-29 15:10:52 +10:00
Adam M Rivera
dadc7d5a7d
ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work.
2012-06-28 20:34:53 -05:00
Andrew Tridgell
33440567e6
ACM: ArduCopter updates for new compass interface
2012-06-27 16:01:50 +10:00
Andrew Tridgell
dae1a57dc5
ACM: adapt the ArduCopter code for new barometer interface
2012-06-27 16:01:50 +10:00
Andrew Tridgell
b676caa626
ACM: enable GPS in AHRS for ArduCopter
...
this is an experiment in centripetal correction for multicopters
2012-06-27 16:01:49 +10:00
Jason Short
c76ac4543b
Added user editable define for Super simple radius
2012-06-26 10:38:46 -07:00
Jason Short
80d15368bc
Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with.
...
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
2012-06-25 23:08:25 -07:00
Jason Short
6020f6d9fa
Added throttle_min as a user definable param
2012-06-20 14:58:34 -07:00
rmackay9
c62cc4844e
ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release
2012-06-15 00:42:59 +09:00
Jason Short
c42f9ece43
Inertial Control
...
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.
This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.
Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.
The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
rmackay9
e1acf21381
ArduCopter: updated firmware version to 2.6 Epsilon
2012-06-12 23:22:57 +09:00
Jason Short
f5a85d48a0
Added Angel's name to contrib list
2012-06-10 12:38:22 -07:00
rmackay9
aeaebb21d5
ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release)
2012-06-08 21:54:09 +09:00
rmackay9
70b04d9427
ArduCopter: updated firmware description to 2.6 Gamma
2012-06-05 21:28:13 +09:00
Jason Short
1b9f75c844
Updates to Flip:
...
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
2012-06-03 22:15:19 -07:00
rmackay9
72d76558a7
ArduCopter: Ensure update_GPS does nothing when gps is disabled.
...
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
2012-06-03 23:48:45 +09:00
rmackay9
fd6b21d0c7
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 17:02:35 +09:00