Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
52,111 Commits 71 Branches 509 Tags 778 MiB
Commit Graph

583 Commits

Author SHA1 Message Date
Andrew Tridgell d0ce3c8774 Plane: fix NAV_CONTROLLER_OUTPUT in Q modes 
Q modes don't always use wp_nav, but do use pos_control

AUTO and QRTL setup the plane navigation as well, so can use the L1
data
 2022-03-10 07:35:32 +11:00
Andrew Tridgell 25f57af2e3 Plane: added APIs for lua ship landing 2022-03-10 07:35:29 +11:00
Andrew Tridgell 38662b98d8 Plane: added Q_LAND_ALTCHG parameter 
this is the threshold height change over 4 seconds for a landing to be
detected. It can be raised if landing detection is very slow
 2022-03-09 07:50:54 +11:00
Iampete1 267583db55 Plane: quadplane: never reset yaw target rates when entering QPOS1 2022-02-21 09:35:06 +11:00
Iampete1 9fd14dbf94 Plane: quadplane: set IO failsafe limit for all motors 2022-02-17 12:31:16 +11:00
Andrew Tridgell 1bdc9b5bf8 Plane: fixed in_vtol logic so QRTL can AIRBRAKE 2022-02-16 07:43:01 +11:00
Andrew Tridgell aab6c94936 Plane: don't weathervane in AIRBRAKE state 
this prevents unwanted VTOL motor throttle while trying to slow
down. In this stage the slaving of yaw rate to fixed wing roll control
is sufficient
 2022-02-16 07:43:01 +11:00
Andrew Tridgell 2846f87eeb Plane: reduce height gain in auto landing for tiltrotors 
avoid running the motors while tilted past the tilt max if we are in
AIRBRAKE state. This stops a large amount of forward thrust from the
tilted motors while trying to slow down, while still maintaining
attitude control
 2022-02-16 07:43:01 +11:00
Iampete1 1ca1707f9f Plane: quadpalne: keep motors interlock state upto date with E-stop 2022-02-10 07:43:40 +09:00
Peter Hall 717b18a680 Plane: quadplane: add allow_weathervane transtion class method 2022-02-08 10:38:16 +11:00
Peter Hall 6a719664d3 Plane: quadplane: pass takeoff and landing state to weathervane 2022-02-08 10:38:16 +11:00
Gone4Dirt a79359dc67 Plane: use new weathervane library 2022-02-08 10:38:16 +11:00
murata f8383df5a4 Plane: Remove meaningless semicolons 2022-02-07 08:27:34 +09:00
Bill Geyer 54bdde8845 Copter: fix parameter issue with quadplane 2022-02-01 23:06:51 -05:00
Peter Barker 266d384ca7 ArduPlane: rename AP_AHRS::get_position to get_location 2022-01-25 10:47:22 +11:00
Iampete1 32488a5e3a Plane: add MOTB logging at 10hz 2022-01-18 10:18:10 +11:00
Iampete1 3a5c7ea8fc Plane: quadplane: add transtion fail action param 2022-01-11 11:02:33 +11:00
Peter Hall 2ffebebddc Plane: tailsitter: provide min throttle limit based on disk therory outflow velocity 2022-01-11 10:37:38 +11:00
Iampete1 ca1b5b1db2 Plane: Quadplane: use get_frame_and_type_string 2022-01-05 19:51:19 +11:00
Peter Hall d4eb2c6396 Plane: quadplane: QPOS_POSITION1 tailsitters use input_vel_accel method 2022-01-04 10:42:12 +11:00
Iampete1 4848ac9166 Plane: quadplane: don't use `is_active_z()`, becasue its wrong 2022-01-04 10:42:12 +11:00
Iampete1 fb1f6b57ad Plane: Quadplane: never run Z controller if motors are not throttle unlimited 2022-01-04 10:42:12 +11:00
Peter Hall c215fa0745 Plane: Quadplane: never run Z controller in tailsiter VTOL transtion 2022-01-04 10:42:12 +11:00
Peter Hall 9df753551e Plane: quadplane: tailsitter: always relax pitch after transtion 2022-01-04 10:42:12 +11:00
Peter Hall 67d7ba490f Plane: quadplane: pass time to tailsitter.in_vtol_transition where avalable 2022-01-04 10:42:12 +11:00
Hwurzburg 18e427d27d Plane: add Q_OPTION to force fw trans on fail instead of QLAND 2021-12-24 13:55:15 +11:00
Iampete1 2154738421 Plane: Quadplane: only advance to QPOS_POSITION2 once tilts have finished slewing 2021-12-22 18:46:14 +11:00
Iampete1 eac52fe08f Plane: quadplane: don't ouput VTOL throttle on tiltrotor with no VTOL motors and till fully forward 2021-12-22 18:46:14 +11:00
Iampete1 6116eaeb32 Plane: quadplane: enhance tiltrotor transtion to better deal with tiltrotors with all motors tilting 2021-12-22 18:46:14 +11:00
Hwurzburg 049f5f2135 Plane: fix divide by zero in transition time 2021-12-10 19:10:51 -08:00
Andrew Tridgell e7c7cdd653 Plane: reset VTOL takeoff if not armed 
we need to reset the takeoff target position while disarmed so we
don't use spurious position information from before we get good GPS
lock.

also remove the "Resetting previous waypoint" message as it doesn't
provide useful information and is just a distraction (it would be
printed continuously while waiting for arming with this PR)
 2021-12-04 16:51:02 +11:00
Josh Henderson 52adda7c4c Plane: INAV rename for neu & cm/cms 2021-11-30 10:08:07 +11:00
Josh Henderson c6dd39773d ArduPlane: inav use _xy() 2021-11-30 10:08:07 +11:00
Andrew Tridgell 36562ed30b Plane: limited VFWD integrator to cruise throttle 
in some situations (such as when landing approach is disabled) the
vfwd integrator can wind up to extreme values. This can put a huge
load on an electric quadplane as it is running both forward and vtol
motors, and the downforce from being nose down can be extreme.

It should never need to go above the cruise throttle in any reasonable
situation, so limit it to cruise to ensure we don't apply too much
forward throttle
 2021-11-24 18:49:24 +11:00
Andrew Tridgell 77c43d9ba1 Plane: limiting POS1 landing target speed 
prevent very high target speeds when the target velocity profile is
above the initial speed in POSITION1. Always allow up to 2*Q_WP_SPEED,
but don't go above the initial speed
 2021-11-24 07:15:21 +11:00
Andrew Tridgell 8d59e6fa48 Plane: fixed variable name 
thanks to Peter for noticing
 2021-11-22 13:15:29 +11:00
Andrew Tridgell ae81bbc5ed Plane: suppress spurious EKF yaw reset message 
this makes plane match copter, emitting a yaw reset event, but not
worrying user. This message came out on each boot when EKF3 first
became active
 2021-11-17 20:54:12 +11:00
Iampete1 9210488550 Plane: quadplane: limit pitch for all transitions into position control modes 2021-11-17 19:10:56 +11:00
Peter Barker 70562021ac ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED 2021-11-15 20:27:40 +11:00
Peter Barker 203103bae5 ArduPlane: ensure ENABLE_SCRIPTING is always defined 2021-11-15 20:27:40 +11:00
Iampete1 b9d240460b Plane: remove SpdHgt and use TECS direct 2021-11-13 08:05:39 +11:00
Peter Barker 7c3de472b2 Plane: support send_extended_sys_state 2021-11-09 10:22:24 +11:00
Andrew Tridgell d3742989ef Plane: default rate max to 75 for quadplane VTOL 
this reduces overshoot when VTOL tune is less than ideal
 2021-11-07 06:58:53 +11:00
Andrew Tridgell debae1381c Plane: fixed a bug in POSITION1 speed thresholds 
we were comparing two different speeds in the threshold for going to
Q_WP_SPEED limit. The reason the two speeds were different was the
wp_nav init happened before the defaults were setup for quadplanes

this fixes both bugs
 2021-11-06 20:00:10 +11:00
Peter Barker 6a12d3f5d9 Plane: use enum class for StickMixing 2021-11-03 18:06:00 +11:00
Iampete1 af8688b300 Quadplane: add transiton class 2021-11-02 10:14:36 +11:00
Andrew Tridgell b74dca02ca Plane: avoid qpos approach when very close to destination 
this prevents a fwd transition when doing something like LOITER_TIME
close to a VTOL_LAND wp. We use 1.5 times the stopping distance at
cruise airspeed for the threshold
 2021-10-29 20:22:19 +11:00
Andrew Tridgell 19b5044223 Plane: fixed VTOL state error when using Q_ENABLE=2 
this ensures the poscontrol state is reset if it has not been
initialised before a VTOL loiter operation

thanks to Pete Hall for finding this
 2021-10-29 20:22:19 +11:00
Iampete1 73e9c9bb43 Plane: quadplane: forward throttle reutrn float 2021-10-20 18:29:58 +11:00
Iampete1 b31ce6734a Plane: get throttle input return float 2021-10-20 18:29:58 +11:00