Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,917 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

4917 Commits

Author SHA1 Message Date
Andrew Tridgell 28d62416fe autotest: show logs on timeout 2012-06-16 06:47:55 +10:00
Andrew Tridgell b2f8fad0a3 autotest: try again to get paths right! 2012-06-15 18:44:00 +10:00
Wingspinner d09ac5899b Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality 2012-06-15 08:40:14 +00:00
Wingspinner b699c77323 Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality 2012-06-15 08:38:52 +00:00
Andrew Tridgell 04a2a0eb46 autotest: added --timeout option 
try to ensure we end up with a timeout display on the website
 2012-06-15 16:53:51 +10:00
Andrew Tridgell 58379b928f MAVLink: make usage of MAVLink defines more consistent 2012-06-15 16:27:11 +10:00
Andrew Tridgell 54d5819f4c test: it is no longer possible to build with MAVLink 0.9 
the Camera and Mount code make it impossible because of the incredibly
silly arduino cpp handling.
 2012-06-15 16:27:11 +10:00
Andrew Tridgell a851c53de4 GPS: need pgmspace.h for _write_progstr_block() 2012-06-15 16:27:11 +10:00
Andrew Tridgell 70f18289c5 GPS: fixed auto-config of UBlox setup with no UBX messages 
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
 2012-06-15 15:53:27 +10:00
Andrew Tridgell 1fe297ab63 FastSerial: added tx_pending() method 
this allows the caller to wait for the tx buffer to drain
 2012-06-15 15:53:27 +10:00
Andrew Tridgell 619bcc00d9 APM: parameter enums should not be conditionally compiled 2012-06-15 11:57:00 +10:00
Andrew Tridgell 0900751bcd APM: added longer comment on k_format_version 2012-06-15 11:55:09 +10:00
Michael Oborne 5a4d471053 firmware build 2012-06-15 08:25:19 +08:00
Michael Oborne fb4981b730 firmware build 2012-06-15 08:19:32 +08:00
rmackay9 c62cc4844e ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release 2012-06-15 00:42:59 +09:00
Jason Short e31a1d969f Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short c42f9ece43 Inertial Control 
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
 2012-06-13 22:34:45 -07:00
Andrew Tridgell 92cb3cdf6f sitl: fixed fgFDM path 2012-06-14 15:18:58 +10:00
Amilcar Lucas 6d2ac62006 Let's keep the same format version until CAMERA is activated by default 2012-06-13 21:28:13 +02:00
Amilcar Lucas 07a18904fc With CLI and MOUNT active, the linker says: region `text' overflowed by 3858 bytes 
So disable CLI when MOUNT is active. Sorry I did not detect it before, but the APM_Camera branch worked in a different way.
 2012-06-13 21:08:09 +02:00
Amilcar Lucas 1906e06b69 Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Amilcar Lucas a32b7c200b Add "3 axis camera stabilization" and "point camera to 3D point" functionality 
Patch by Gregory Fletcher and reviewed by me
 2012-06-13 20:55:19 +02:00
Amilcar Lucas 881a66ae01 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-06-13 20:45:04 +02:00
Amilcar Lucas 5ffd489d87 Spellcheck 2012-06-13 20:44:35 +02:00
Jean-Louis Naudin 846b128075 APMrover 2.0a - improving obstacles detection and tuning 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-06-13 20:43:35 +02:00
rmackay9 65050775e1 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Jean-Louis Naudin 9355a159fc APMrover v2.20 - use RangeFinder optical SharpGP2Y instead of ultrasonic sonar 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-06-13 08:29:32 +02:00
Jason Short ff0659535e Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9 e1acf21381 ArduCopter: updated firmware version to 2.6 Epsilon 2012-06-12 23:22:57 +09:00
rmackay9 c6f1d93849 ArduCopter: updated standard loiter pids. 
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
 2012-06-12 20:56:31 +09:00
rmackay9 1e38b0d535 AP_GPS_NMEA: fix from Roberto Navoni to improve NMEA accuracy 2012-06-12 20:27:50 +09:00
Jason Short 448e4d8728 Added CLI level command 2012-06-11 23:01:25 -07:00
Jason Short c804860243 Cosmetic changes only. 2012-06-10 13:10:07 -07:00
Jason Short 4e50db2f6e Added missing Manual_level config 2012-06-10 13:08:48 -07:00
Jason Short 37d8f86d33 Added missing Manual Level initializer 2012-06-10 13:08:22 -07:00
Jason Short f5a85d48a0 Added Angel's name to contrib list 2012-06-10 12:38:22 -07:00
Andrew Tridgell d5c9d31774 Rover: added APMrover2 to build_all.sh 
hopefully it will stay building
 2012-06-10 19:35:56 +10:00
Andrew Tridgell 93de111837 Rover: fixed the build for MAVLink 1.0 
I have no idea if it will actually work, but at least it builds
 2012-06-10 19:34:11 +10:00
Andrew Tridgell 940d994efb GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
Andrew Tridgell f9560ef093 GPS: use the new nav_setting in a couple of the sample sketches 2012-06-10 16:35:13 +10:00
Andrew Tridgell 33a2ad7e07 GPS: add stub settings for nav_setting in the other GPS drivers 
only Ublox supports nav_setting so far
 2012-06-10 16:34:53 +10:00
Andrew Tridgell 514be604a5 GPS: added auto-configuration of UBlox GPS 
the Ublox will now auto-configure for 5Hz with just the messages we
want. It also supports setting the navigation engine type
 2012-06-10 16:34:13 +10:00
Andrew Tridgell 9c1ce9e1c5 FastSerial: avoid buffer re-allocation on re-open if possible 
we commonly re-open serial ports a lot in the AUTO GPS driver
 2012-06-09 07:43:22 +10:00
rmackay9 aeaebb21d5 ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release) 2012-06-08 21:54:09 +09:00
Andrew Tridgell 99b39aef93 APM: ready for 2.40-beta 2012-06-08 18:03:21 +10:00
Andrew Tridgell cf4e56457b SITL: map() is a C++ function, so needs to be in C++ part of the header 
this fixes the ACM build
 2012-06-08 17:09:23 +10:00
Andrew Tridgell cbf477addd GPS: added debug code to the main GPS class 2012-06-08 16:42:03 +10:00
Andrew Tridgell a8bfc5d8e9 GPS: re-open the serial port with a 256 byte serial receive buffer 
this ensures all GPS parsers have a 256 byte buffer available
 2012-06-08 16:42:03 +10:00
Andrew Tridgell a684bddbda GPS: open the GPS serial port with a 256 byte buffer 
the UBLOX needs more than 128 bytes for reliable parsing
 2012-06-08 16:42:03 +10:00
Andrew Tridgell 296e651b30 GPS: fixed the UBLOX parser to handle unknown messages 
the parser was broken in several ways:

 1) when it received an unknown message it didn't update the ck_a and ck_b fields, so it
    thought the message had a bad checksum, which meant it got out of protocol sync

 2) the read() method would return false if the last message from the GPS was of an unknown type. 
    So we relied on the last msg always being one that we understand and want

 3) the parser considered any valid UBLOX message to be 'new data', whereas we only actually get 
    a new fix when we get box a new position and velned message

 4) the total message size per update is more than 128 bytes, but the serial port was opened 
    with only a 128 byte buffer, so we got corruption regularly
 2012-06-08 16:42:02 +10:00