Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,415 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

75 Commits

Author SHA1 Message Date
Peter Barker c2f9b857a4 Copter: remove unused baro_climbrate variable 2018-07-04 21:08:47 +01:00
Peter Barker 724f34c7e7 Copter: use MAV_SYS_STATUS_SENSOR_PROXIMITY for proximity sensor 
Copter: correct laser sensor health bits
 2018-06-26 10:25:28 +10:00
Randy Mackay 25475b65d9 Copter: proximity sensor reports laser unhealthy when no data 2018-05-24 12:46:38 +09:00
Peter Barker 6dd9f50f7c Copter: move try_send_message handling of RC_CHANNELS up 2018-05-08 12:33:32 +01:00
Peter Barker c95ff96263 Copter: Baro does its own dataflash logging 2018-04-12 19:12:12 +01:00
Peter Barker d58e2214d2 Copter: tidy handling of barometer calibrations 2018-04-02 23:25:05 +01:00
Dr.-Ing. Amilcar do Carmo Lucas d633ba8c46 Copter: Add option to disable RPM module 2018-03-30 09:36:48 +09:00
Michael du Breuil 291531e056 Copter: Support new battery failsafes 2018-03-27 22:12:21 +01:00
Peter Barker b8e1f03599 Copter: add define for disabling beacon 2018-02-27 07:43:13 +09:00
murata c31c2a4cf1 Copter: optionalize the winch 2018-02-12 12:16:57 +09:00
Peter Barker 40d74584ac Copter: remove shims used in scheduler 2018-02-12 11:19:34 +09:00
Andrew Tridgell f442b91ea5 Copter: added FLOWHOLD flight mode 
This flight mode allows for position hold with optical flow without
needing a rangefinder for height. It can estimate its height from the
flow data and IMU
 2018-02-08 17:36:33 +11:00
Andrew Tridgell 15166eff2e Copter: enable temperature calibration library 2018-02-08 17:36:33 +11:00
Michael du Breuil 69da4041ac Copter: Move logging battery logging code to AP_BattMonitor 2018-02-06 00:11:32 +00:00
Michael du Breuil 0ddcb0a6fb Copter: Support AP_BattMonitor_Params 2018-01-17 22:21:55 +00:00
Peter Barker 6bcdab55d0 Copter: rename sys_status methods from geofence_ to sys_status_ 2018-01-09 17:15:19 +00:00
Peter Barker 7222380598 Copter: populate system status bits for fence 2017-12-13 10:04:50 +09:00
Randy Mackay 9a03ba1bfb Copter: move barometer_accumulate to sensors.cpp 
non-functional change
 2017-11-22 17:13:14 +09:00
Randy Mackay 787954fa37 Copter: integrate winch library 
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
 2017-10-27 09:20:38 +09:00
Michael du Breuil 516709fc72 Copter: Check GPS health 2017-09-27 19:29:32 +01:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 8df042f00c Copter: complete addition of SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Randy Mackay 34560fb1fb Copter: remove enabled check from optflow init 2017-08-23 11:19:14 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker f60389d4aa Copter: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Randy Mackay cb76bd8f3d Copter: compass set-initial-location uses ahrs location 
Previously it could attempt to use a gps location even if gps was not being used
Also compass-accumulate moved to sensors.cpp
 2017-06-07 13:01:38 +09:00
Randy Mackay ec491d3c6b Copter: init_compass get g.compass_enabled check 
No functional change
 2017-06-07 10:34:13 +09:00
Leonard Hall 8def1d257e Copter: pass battery resistance estimate to motors 2017-06-06 14:57:04 +09:00
Randy Mackay 713c08672f Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Randy Mackay 51c00f8144 Copter: use only downward facing rangefinder 2017-02-27 15:18:16 +09:00
murata 8f926bd177 Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Michael du Breuil 0fec4af54b Copter: Support the SYS_STATUS_SENSOR_BATTERY bit 2017-01-25 09:26:19 +09:00
Randy Mackay af514eb101 Copter: remove some comments 2017-01-23 15:07:20 -08:00
Dmitry Prokhorov 3e993f955e ArduCopter: Support for OLED display by Alexey Kozin 2017-01-23 15:07:20 -08:00
Andrew Tridgell 0f6d0c5ba9 Copter: combined tri, single, coax and multicopter into a single build 
this allows copter to be just 2 builds, one for heli, and one for
everything else
 2017-01-12 17:39:37 +11:00
Randy Mackay 21c7ea1df7 Copter: integrate AP_Beacon 2016-11-30 17:56:55 +09:00
Andrew Tridgell 2ed32a3ac0 Copter: added raw RFND logging 2016-11-21 10:30:12 +11:00
Peter Barker 236b8ab6b7 Copter: make EPM a subclass of AP_Gripper_Backend 2016-11-05 10:20:39 +09:00
Peter Barker 920868145c Copter: support for AP_Gripper 2016-11-05 10:20:33 +09:00
floaledm aa8cae82b0 Copter: redo of commit b24d850695 2016-10-30 11:46:39 -02:00
floaledm 34718b130a Copter: update sensor status error flags independently of sending a sys_status message 
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
 2016-10-28 10:03:38 +11:00
Andrew Tridgell e8b9c815fc Copter: updates for EKF API changes 2016-10-27 17:09:06 +11:00
priseborough 209e364190 Copter: Add body position offset to optical flow interface 2016-10-27 14:54:42 +11:00
Michael du Breuil 790ddeb04e Copter: Use the compass calibrator autoreboot behaviour 
(fixes a chance of not saving the second compass)
 2016-10-27 14:04:33 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Randy Mackay 0aab175051 Copter: move proximity to g2 2016-10-14 14:02:29 +09:00
Randy Mackay fcc2a1b378 Copter: integrate AP_Proximity into main vehicle 2016-10-13 20:21:07 +09:00
Jonathan Challinger a393bd26d7 Copter: add stick gesture to begin compass calibration 2016-10-05 16:29:02 +09:00
Andrew Tridgell cb5ca713a9 Copter: added AP_Button support 2016-07-22 15:01:20 +10:00
Randy Mackay 5461002eea Copter: read rangefinder at 20hz 2016-05-21 10:36:53 +09:00