Andrew Tridgell
c882262ff9
Plane: fixed EKF yaw reset
...
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective
thanks to Leonard for noticing the bug!
2019-01-15 10:41:50 +11:00
Andrew Tridgell
a57f3880d1
Plane: fixed VTOL takeoff to ignore lat/lon in mission
...
we should always takeoff vertically
2019-01-11 12:42:18 +11:00
Andrew Tridgell
9b0d2eca07
Plane: Missing Loiter Init on accel
...
# Conflicts:
# ArduPlane/quadplane.cpp
2018-09-19 13:22:42 +10:00
Leonard Hall
241972a300
QuadPlane: remove true from init of loiter
2018-09-15 10:25:12 +10:00
Andrew Tridgell
9a9dca045d
Plane: do attitude relax after 100ms
2018-09-15 10:09:29 +10:00
Leonard Hall
9a3ed31040
QuadPlane: Remove repeat I term reset
2018-09-15 10:09:15 +10:00
Andrew Tridgell
4e148959c9
Plane: fixed relaxing of attitude controller on transition
...
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
2018-09-14 10:51:40 +10:00
Andrew Tridgell
58a363c643
Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors
...
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
2018-09-13 21:00:34 +10:00
Andrew Tridgell
0fd20b6d0c
Plane: pass rc_speed to motor backend constructors
...
this sets the right speed as early as possible
2018-07-28 15:26:27 +10:00
IamPete1
eb7f752ec5
Plane: added Q_TAILSIT_THSCMX
...
this provides more flexibility in tailsitter throttle scaling
2018-07-19 14:46:53 +10:00
Andrew Tridgell
d8a7618e15
Plane: update use of AC_Loiter controller for quadplane
...
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.
The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.
This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
2018-06-11 08:40:58 +09:00
Andrew Tridgell
d07f8aa42b
Plane: fixed a bug in transition to QSTABILIZE for tailsitters
...
this bug was found bug Marco on his tailsitter. It resulted in zero
throttle for 2s in transition from FBWA to QSTABILIZE
2018-04-25 18:01:12 +10:00
Randy Mackay
840a6e4147
Plane: quadplane uses AC_Loiter
...
includes param conversion
2018-04-04 10:45:10 +09:00
Peter Barker
f6a185a3c3
Plane: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Randy Mackay
548a7f8fcf
Plane: add minor comment to quadplane
2018-03-16 13:50:57 +09:00
Leonard Hall
ee745d2cd2
Plane: quad plane uses rate-control control during transitions
2018-03-16 13:50:57 +09:00
Leonard Hall
a16d4ddad7
Plane: quadplane uses poscontrol instead of loiter
2018-03-16 13:50:57 +09:00
Randy Mackay
c5d838125b
Plane: quadplane logs PSC message
2018-03-16 13:50:57 +09:00
Randy Mackay
09cad7c59d
Plane: quadplane integrates attitude control inertial_frame_reset
2018-03-16 13:50:57 +09:00
Randy Mackay
03c162432e
Plane: quadplane provides dt to AC_WPNav::set_pilot_desired_acceleration
2018-03-16 13:50:57 +09:00
Randy Mackay
a0a9a68fbc
Plane: quadplane smoothing gain replaced by Q_A_INPUT_TC
...
Q_A_INPUT_TC parameter allows this to be tuned and a single value (which defaults to a value between the two previously used values) is used for all modes
2018-03-16 13:50:57 +09:00
Leonard Hall
aa47b19dea
Plane: remove quadplane calls to multicopter poscontrol's freeze_ff_xy
2018-03-16 13:50:57 +09:00
Randy Mackay
ddcd08d6b6
Plane: PSC_ACCZ param name shortened
2018-01-31 08:48:21 +09:00
Michael du Breuil
aec7521da4
Plane: Fix truncation of a time interval
...
Truncating the a millisecond time delta to uint16_t causes it to wrap
every 65 seconds, which could momentarily reset the desired climb rate
2018-01-25 14:30:49 +11:00
Randy Mackay
d579e086cf
Plane: quadplane param index comment for moved PIDs
2018-01-24 21:14:53 +09:00
Andrew Tridgell
20b05e4228
Plane: added conversion code for PID layout change
...
this copes with the move of multicopter PIDs inside the position
controller
2018-01-24 18:23:59 +11:00
Randy Mackay
7b1157e2d8
Plane: remove setting accel_z PID controller's dt
...
This is handled within pos-controller's set_dt function
2018-01-23 12:00:43 +09:00
Randy Mackay
f41f4dc6e5
Plane: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Randy Mackay
017e71a748
Plane: quadplane velocity pi moves to position control library
2018-01-23 12:00:43 +09:00
luweikxy
25224cd261
Plane: remove dead code from do_vtol_land
2017-12-14 20:52:18 +09:00
Andrew Tridgell
f7a735b990
Plane: fixed transitions for tailsitters after auto-takeoff
...
need to use angle wait
2017-11-19 16:06:02 +11:00
Andrew Tridgell
957c1f6d23
Plane: extend QLOITER transition pitch limit
...
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
2017-11-05 21:35:32 +11:00
Andrew Tridgell
9c8cd6c1cc
Plane: added Q_TRANS_DECEL
...
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Andrew Tridgell
e27c54a312
Plane: smooth out fwd tailsitter transition
...
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
2017-11-05 17:25:00 +11:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
nick2204
7d91755bd1
Plane: update Q_OPTIONS docs
...
Made q_options description a little clearer
2017-11-01 09:38:42 +11:00
Andrew Tridgell
1085069851
Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL
2017-10-30 16:52:19 +11:00
Andrew Tridgell
552faa8f67
Plane: smoother tailsitter transitions
...
this smooths out tailsitter transitions in both directions, adding a
new FW to VTOL transition state
2017-10-30 16:30:38 +11:00
Andrew Tridgell
af893ddde7
Plane: implement Q_OPTIONS
...
this allows for NAV_TAKEOFF to be treated as NAV_VTOL_TAKEOFF in
quadplanes, and for level flight to be maintained during quadplane
transitions
2017-10-30 16:30:10 +11:00
Andrew Tridgell
02f8d888c3
Plane: relax controllers when disarmed
...
this prevents any remaining integrator from a previous flight stage from
affecting flight across a disarm
2017-10-30 16:30:10 +11:00
Andrew Tridgell
92ee05b925
Plane: fixed motor channel handling
2017-10-25 11:39:11 +11:00
Andrew Tridgell
6526ff504d
Plane: fix for changes to AP_Motors API
2017-10-22 15:52:50 +11:00
Andrew Tridgell
e008559b6e
Plane: support LOITER_TO_ALT in quadplanes
2017-10-21 18:50:01 +11:00
Andrew Tridgell
8178ab4037
Plane: make mav_type in HEARTBEAT configurable
...
needed for qgc to setup for quadplanes
2017-10-20 15:41:06 +11:00
Andrew Tridgell
0aed5a9a57
Plane: prevent controller windup on ground
...
when on the ground in an auto-throttle mode lik FBWB or CRUISE, we may
have the throttle suppressed. In that case we should not run the
multicopter controller on quadplanes, or it may build up control which
will then apply on takeoff. This is particularly severe for aircraft
that are not level on the ground, such as taildragger quadplanes
Fixes https://discuss.ardupilot.org/t/quadplane-flips-on-takeoff/22095
many thanks to Sriram for reporting
2017-10-20 15:41:04 +11:00
Andrew Tridgell
1a95dcbdd7
Plane: update docs for Q_YAW_RATE_MAX
2017-10-20 15:40:58 +11:00
Andrew Tridgell
f5b4d8d99c
Plane: added frame type 11 for FlreFlyY6
2017-10-06 11:36:34 +11:00
Ferruccio Vicari
85ab3edc5f
Plane: Smoother transition to QLOITER and QLAND
...
Use estimated stopping position
2017-09-21 07:57:38 +10:00
mirkix
7c6be7c421
Plane: change format of reset alt target message
2017-09-20 20:28:53 +10:00
mirkix
b682f3f6d9
Plane: fix parameter units
2017-09-19 11:34:26 +10:00