Andrew Tridgell
|
8066478679
|
AP_Airspeed: fixed airspeed cal on 2nd airspeed sensor
we need to use the pressure from the sensor we are calibrating
|
2022-05-28 16:08:08 +09:00 |
Joshua Henderson
|
7a2d48389c
|
AP_Airspeed: remove negative pressure set unhealthy
|
2022-05-28 16:08:08 +09:00 |
Tom Pittenger
|
bf11e304f6
|
AP_Airspeed: improve description of ARSPD_TUBE_ORDR
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
7ced9b0d32
|
AP_Airspeed: rename get_health_failure_probability to get_health_probability
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
8a4f256ad5
|
AP_Airspeed: Health: use reading from correct airspeed sensor
|
2022-03-12 08:01:18 +09:00 |
Michael du Breuil
|
382cbb9b4d
|
AP_Airspeed: Sanity check DLVR raw data before accumulating it
This is intended to help with really bad RF interference flipping bits on the I2C bus which can lead to some intresting results
|
2022-02-09 09:00:22 +11:00 |
murata
|
629469acbf
|
AP_Airspeed: remove duplicated words from comments
|
2022-02-07 08:24:14 +09:00 |
Peter Barker
|
2d0d2a123d
|
AP_Airspeed: move Airspeed up to AP_Vehicle, use dummy class for Copter
|
2022-01-19 18:21:32 +11:00 |
Josh Henderson
|
1831a1a009
|
AP_Airspeed: NFC add note about TYPE 0 index
|
2022-01-19 18:21:32 +11:00 |
Josh Henderson
|
bf65b2eba8
|
AP_Airspeed: move default type for SITL to be for only Plane
|
2022-01-19 18:21:32 +11:00 |
Joshua Henderson
|
3cfbad0f4d
|
AP_Airspeed: add AP_AIRSPEED_ENABLED
|
2022-01-19 18:21:32 +11:00 |
Peter Barker
|
3969d6d56f
|
AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C
These are in celsius
|
2022-01-13 18:31:46 +11:00 |
Hwurzburg
|
7c6816ec70
|
AP_Airspeed: change UAVCAN in metadata to DroneCAN
|
2021-12-15 09:53:21 +11:00 |
Peter Barker
|
f9580c0dfe
|
AP_Airspeed: add date for parameter conversion code
|
2021-11-23 12:27:14 +00:00 |
Josh Henderson
|
ea4c3d68d6
|
AP_Airspeed: make MAV_SEVERITY levels higher
|
2021-11-03 18:06:48 -07:00 |
Iampete1
|
89c0a8ea04
|
AP_Airspeed: use floats for get/set output scaled
|
2021-10-20 18:29:58 +11:00 |
Hwurzburg
|
b327f80946
|
AP_Airspeed: do not cal if backend does not exist
|
2021-10-07 13:36:44 +11:00 |
Iampete1
|
0731af751a
|
AP_Airspeed: analog: check valid pin
|
2021-10-06 18:42:51 +11:00 |
Peter Barker
|
22e9ad4818
|
AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED
|
2021-09-22 21:37:00 +10:00 |
Andrew Tridgell
|
f65620f4f3
|
AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
this saves a lot of flash by only including specific drivers
|
2021-09-21 13:51:40 +10:00 |
Josh Henderson
|
c454cea401
|
AP_Airspeed: fix MS5525 driver to allow copying driver to 64bit SITL
|
2021-09-21 09:30:58 +10:00 |
Peter Barker
|
16c11fc4fa
|
AP_Airspeed: allow zero offset if we are skipping calibration
|
2021-09-15 17:52:34 +10:00 |
Peter Barker
|
2be49cb42b
|
AP_Airspeed: fix examples for AP_AHRS_DCM becoming backend
|
2021-08-31 14:28:53 +10:00 |
Andrew Tridgell
|
3f67917c26
|
AP_Airspeed: check for baro baro data in SDP3X
this matters for SDP3X as AP_Periph sensor with no baro
|
2021-08-10 07:10:02 +10:00 |
Andrew Tridgell
|
cbf549b1eb
|
AP_Airspeed: fixed display of ARSPD_DEVID when ARSPD2_TYPE=0
|
2021-07-21 18:22:11 +10:00 |
Andrew Tridgell
|
5f87335325
|
AP_Airspeed: review updates
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
|
2021-07-12 17:14:59 +10:00 |
Andrew Tridgell
|
70bb470eb0
|
AP_Airspeed: fixed AP_Periph build
|
2021-07-12 17:14:59 +10:00 |
Andrew Tridgell
|
0bdd8231cf
|
AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
if the MS4525 has its own LDO then we are should disable the
correction
|
2021-07-12 17:14:59 +10:00 |
Andrew Tridgell
|
ca1508b02e
|
AP_Airspeed: added DEVID parameters for airspeed
this makes log analysis easier
|
2021-07-12 17:14:59 +10:00 |
Andrew Tridgell
|
7f85b413f2
|
AP_Airspeed: use GCS_SEND_TEXT instead of printf for sensor probe messages
|
2021-07-12 17:14:59 +10:00 |
Andrew Tridgell
|
e6c7970a19
|
AP_Airspeed: support 3 I2C addresses for MS4525
and if bus number is configured then use only that bus number,
otherwise probe all buses as per existing behaviour
|
2021-07-12 17:14:59 +10:00 |
Peter Barker
|
6da68e39f8
|
AP_Airspeed: add rc channel option to disable all airspeed sensors
|
2021-06-23 15:13:13 +10:00 |
Michael du Breuil
|
29d6900888
|
AP_Airspeed: Remove unneeded initilization
We pre zero all memory
|
2021-06-22 10:08:02 +10:00 |
Peter Barker
|
00002b78a4
|
AP_Airspeed: remove HIL support
|
2021-06-15 09:47:31 +10:00 |
QioTek
|
0190a42e47
|
AP_Airspeed: added ASP5033 driver
|
2021-03-28 07:50:34 +11:00 |
Andrew Tridgell
|
ea57b1982f
|
AP_Airspeed: cope with no temperature on MSP airspeed
|
2020-12-08 20:41:12 +11:00 |
Andrew Tridgell
|
2d75ef4f60
|
AP_Airspeed: handle INT16_MIN temperature for UAVCAN sensor
|
2020-12-08 20:41:12 +11:00 |
Andrew Tridgell
|
73fda4e6a7
|
AP_Airspeed: cope with zero ratio in SDP3X driver
needed for AP_Periph
|
2020-12-08 20:41:12 +11:00 |
Andrew Tridgell
|
857d905d9f
|
AP_Airspeed: added MSP backend
|
2020-12-08 20:41:12 +11:00 |
Peter Barker
|
de2802e322
|
AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
Without this ARSP[x].Airspeed isn't populated
|
2020-12-08 11:59:49 +11:00 |
Hwurzburg
|
615b8add8c
|
AP_Airspeed: add inflight airspeed cal rc switch
|
2020-11-25 21:30:15 +11:00 |
Peter Barker
|
8647dda8a9
|
AP_Airspeed: add and use instance number to ARSP message
|
2020-11-24 12:19:45 +11:00 |
Iampete1
|
7aad83ccca
|
AP_Airspeed: add MATLAB based NMEA sensor example
|
2020-10-27 11:24:49 +11:00 |
Iampete1
|
0e41b821e8
|
AP_Airspeed: defualt to type none on sub
|
2020-10-27 11:24:49 +11:00 |
Iampete1
|
2aff8787c1
|
AP_Airspeed: add NMEA water speed backend
|
2020-10-27 11:24:49 +11:00 |
Iampete1
|
662d4640ef
|
AP_Airspeed: add dedicated MAX_WIND param
|
2020-10-27 11:21:04 +11:00 |
Pierre Kancir
|
52898cfdbd
|
AP_Airspeed: remove size warning on SDP3X crc function.
Clang-Tidy: Loop variable has narrower type 'uint8_t' (aka 'unsigned char') than iteration's upper bound 'unsigned int'
|
2020-10-14 07:52:02 +11:00 |
Andrew Tridgell
|
505953bdb2
|
AP_Airspeed: added get_num_sensors()
|
2020-08-27 20:20:51 +10:00 |
Andrew Tridgell
|
a20d3fed94
|
AP_Airspeed: allow hwdef override of airspeed default type
|
2020-08-25 09:59:15 +10:00 |
Siddharth Purohit
|
d65b43795a
|
AP_Airspeed: move to using CANManager library
|
2020-08-19 17:31:09 +10:00 |