Commit Graph

286 Commits

Author SHA1 Message Date
Peter Barker 2d0d2a123d AP_Airspeed: move Airspeed up to AP_Vehicle, use dummy class for Copter 2022-01-19 18:21:32 +11:00
Josh Henderson 1831a1a009 AP_Airspeed: NFC add note about TYPE 0 index 2022-01-19 18:21:32 +11:00
Josh Henderson bf65b2eba8 AP_Airspeed: move default type for SITL to be for only Plane 2022-01-19 18:21:32 +11:00
Joshua Henderson 3cfbad0f4d AP_Airspeed: add AP_AIRSPEED_ENABLED 2022-01-19 18:21:32 +11:00
Peter Barker 3969d6d56f AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C
These are in celsius
2022-01-13 18:31:46 +11:00
Hwurzburg 7c6816ec70 AP_Airspeed: change UAVCAN in metadata to DroneCAN 2021-12-15 09:53:21 +11:00
Peter Barker f9580c0dfe AP_Airspeed: add date for parameter conversion code 2021-11-23 12:27:14 +00:00
Josh Henderson ea4c3d68d6 AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
Iampete1 89c0a8ea04 AP_Airspeed: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Hwurzburg b327f80946 AP_Airspeed: do not cal if backend does not exist 2021-10-07 13:36:44 +11:00
Iampete1 0731af751a AP_Airspeed: analog: check valid pin 2021-10-06 18:42:51 +11:00
Peter Barker 22e9ad4818 AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Andrew Tridgell f65620f4f3 AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Josh Henderson c454cea401 AP_Airspeed: fix MS5525 driver to allow copying driver to 64bit SITL 2021-09-21 09:30:58 +10:00
Peter Barker 16c11fc4fa AP_Airspeed: allow zero offset if we are skipping calibration 2021-09-15 17:52:34 +10:00
Peter Barker 2be49cb42b AP_Airspeed: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
Andrew Tridgell 3f67917c26 AP_Airspeed: check for baro baro data in SDP3X
this matters for SDP3X as AP_Periph sensor with no baro
2021-08-10 07:10:02 +10:00
Andrew Tridgell cbf549b1eb AP_Airspeed: fixed display of ARSPD_DEVID when ARSPD2_TYPE=0 2021-07-21 18:22:11 +10:00
Andrew Tridgell 5f87335325 AP_Airspeed: review updates
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-07-12 17:14:59 +10:00
Andrew Tridgell 70bb470eb0 AP_Airspeed: fixed AP_Periph build 2021-07-12 17:14:59 +10:00
Andrew Tridgell 0bdd8231cf AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
if the MS4525 has its own LDO then we are should disable the
correction
2021-07-12 17:14:59 +10:00
Andrew Tridgell ca1508b02e AP_Airspeed: added DEVID parameters for airspeed
this makes log analysis easier
2021-07-12 17:14:59 +10:00
Andrew Tridgell 7f85b413f2 AP_Airspeed: use GCS_SEND_TEXT instead of printf for sensor probe messages 2021-07-12 17:14:59 +10:00
Andrew Tridgell e6c7970a19 AP_Airspeed: support 3 I2C addresses for MS4525
and if bus number is configured then use only that bus number,
otherwise probe all buses as per existing behaviour
2021-07-12 17:14:59 +10:00
Peter Barker 6da68e39f8 AP_Airspeed: add rc channel option to disable all airspeed sensors 2021-06-23 15:13:13 +10:00
Michael du Breuil 29d6900888 AP_Airspeed: Remove unneeded initilization
We pre zero all memory
2021-06-22 10:08:02 +10:00
Peter Barker 00002b78a4 AP_Airspeed: remove HIL support 2021-06-15 09:47:31 +10:00
QioTek 0190a42e47 AP_Airspeed: added ASP5033 driver 2021-03-28 07:50:34 +11:00
Andrew Tridgell ea57b1982f AP_Airspeed: cope with no temperature on MSP airspeed 2020-12-08 20:41:12 +11:00
Andrew Tridgell 2d75ef4f60 AP_Airspeed: handle INT16_MIN temperature for UAVCAN sensor 2020-12-08 20:41:12 +11:00
Andrew Tridgell 73fda4e6a7 AP_Airspeed: cope with zero ratio in SDP3X driver
needed for AP_Periph
2020-12-08 20:41:12 +11:00
Andrew Tridgell 857d905d9f AP_Airspeed: added MSP backend 2020-12-08 20:41:12 +11:00
Peter Barker de2802e322 AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
Without this ARSP[x].Airspeed isn't populated
2020-12-08 11:59:49 +11:00
Hwurzburg 615b8add8c AP_Airspeed: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00
Peter Barker 8647dda8a9 AP_Airspeed: add and use instance number to ARSP message 2020-11-24 12:19:45 +11:00
Iampete1 7aad83ccca AP_Airspeed: add MATLAB based NMEA sensor example 2020-10-27 11:24:49 +11:00
Iampete1 0e41b821e8 AP_Airspeed: defualt to type none on sub 2020-10-27 11:24:49 +11:00
Iampete1 2aff8787c1 AP_Airspeed: add NMEA water speed backend 2020-10-27 11:24:49 +11:00
Iampete1 662d4640ef AP_Airspeed: add dedicated MAX_WIND param 2020-10-27 11:21:04 +11:00
Pierre Kancir 52898cfdbd AP_Airspeed: remove size warning on SDP3X crc function.
Clang-Tidy: Loop variable has narrower type 'uint8_t' (aka 'unsigned char') than iteration's upper bound 'unsigned int'
2020-10-14 07:52:02 +11:00
Andrew Tridgell 505953bdb2 AP_Airspeed: added get_num_sensors() 2020-08-27 20:20:51 +10:00
Andrew Tridgell a20d3fed94 AP_Airspeed: allow hwdef override of airspeed default type 2020-08-25 09:59:15 +10:00
Siddharth Purohit d65b43795a AP_Airspeed: move to using CANManager library 2020-08-19 17:31:09 +10:00
Josh Welsh eb4b5fb720 AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O 2020-08-12 08:02:49 +10:00
Henry Wurzburg 21940cea09 AP_Airspeed: fix airspeed messages for consistency 2020-07-21 09:41:05 +10:00
Michael du Breuil ceb0a9c827 AP_Airspeed: Rearrange state to save memory
Saves 8 bytes per airspeed sensor (2 backends for 8 total), and removes
the unneeded width specifier, which has no impact on used memory, and
saves us 88 bytes of flash because we don't have to do work to shift the
bits around.
2020-05-06 18:15:08 +10:00
Andrew Tridgell 40f1b5f9ae AP_Airspeed: use GCS_SEND_TEXT() 2020-04-29 07:36:55 +10:00
Peter Barker 6046aa3625 AP_Airspeed: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Andrew Tridgell 0f6f684bab AP_Airspeed: expose get_corrected_pressure()
needed for AP_Periph
2020-03-25 20:37:00 +11:00
Andrew Tridgell b5e091bc84 AP_Airspeed: hide unused parameters for AP_Periph 2020-02-18 11:15:05 +11:00