Randy Mackay
925f76c048
Copter: integrate winch changes
...
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
2020-08-07 21:55:07 +09:00
Andy Piper
12c9578a66
Copter: add in additional acro options
...
Air-mode for multicopters
Rate only for multicopters and trad-heli
if air-mode aux switch is toggled in acro do not reset air-mode on exit
2020-07-14 15:54:24 +09:00
Tatsuya Yamaguchi
cde7ae246e
Copter: add ZIGZ_AUTO_ENABLE parameter
2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
cee7e94ebc
Copter: add zigzag_line_num parameter
2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
7bc528097d
Copter: support zigzag auto feature
2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
60fb275501
Copter: rename zigzag_auto_pump to zigzag_sprayer
2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
63002111eb
Copter: add ZIGZAG_WP_DELAY parameter
2020-06-03 15:21:21 +09:00
Randy Mackay
c4b5d47e1f
Copter: white space fixes
2020-04-23 13:17:11 +09:00
Randy Mackay
04c3f040a8
Copter: visual odometry moved to AP_Vehicle
2020-04-09 19:41:08 +09:00
Tatsuya Yamaguchi
6b192de389
Copter: add ZIGZAG_AUTO_PUMP parameter
2020-02-19 19:56:56 +09:00
Andy Piper
93abfdb905
Copter: create generic vehicle management and move runcam to it
2019-12-30 13:02:04 +11:00
Randy Mackay
ea22e888c7
Copter: improve RTL terrain following
...
RTL_ALT_TYPE replaces TERRAIN_FOLLOW param
return path built using rangefinder or terrain database
pre-arm checks for RTL_ALT_TYPE parameter
pre-arm checks of terrain data only run if RTL might use it
2019-12-17 20:02:01 +09:00
Peter Barker
544eb5f179
Copter: correct duplicate button instance
2019-12-10 09:29:52 +09:00
Gone4Dirt
180d4e713c
Copter: Added autorotation flight mode and support
2019-11-29 08:06:10 +08:00
Matt Lawrence
f71ef4c7ab
Copter: Refactor failsafes, add fs_options bitmask parameter
...
- Radio failsafe, battery failsafe, GCS failsafe refactoring
- Add new FS_OPTIONS parameter
- Enhance GCS Failsafe abilities
2019-11-03 07:07:34 +08:00
Randy Mackay
7b0da89708
Copter: add vibration check
2019-10-18 11:15:25 +09:00
Leonard Hall
c11f2247eb
Copter: System ID mode
2019-10-16 08:17:09 +09:00
murata
abb91fc33a
Copter: Change external button specification to option
...
Copter: Change the definition name from BUTTON to BUTTON_ENABLED.
2019-10-08 08:09:19 +09:00
Peter Barker
b4537bebd8
Copter: move control_mode_t into being Mode::Number enum class
...
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
2019-09-13 13:12:08 +09:00
Randy Mackay
709c874d8b
Copter: integrate AP_OAPathPlanner
2019-08-17 09:42:43 +09:00
Peter Barker
676d75c391
Copter: correct namespacing of Copter modes
...
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker
e5b25824eb
Copter: remove unused takeoff_trigger_dz parameter
2019-04-09 08:15:39 +10:00
Randy Mackay
a5bdd12bfa
Copter: replace TUNE_LOW/HIGH params with TUNE_MIN/MAX
...
change from uint16 to floats to ease setup
also add check that no function assigned to rc6
2019-04-08 15:24:00 +09:00
Peter Barker
2040580ce7
Copter: move enabled parameter into compass library
2019-04-02 10:24:49 +11:00
Patrick José Pereira
33764d6c3b
Copter: Fix typo
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-03-26 15:39:23 +11:00
Michael du Breuil
cac4b91671
Copter: Allow scripting to run
2019-03-05 08:45:54 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Andrew Tridgell
89d54767b1
Copter: convert to use AC_AutoTune library
...
this maintains existing behaviour
2018-12-18 10:34:42 +09:00
SergeyBokhantsev
af6303c82b
Copter: User parameters implementation
2018-08-31 08:42:03 +09:00
Peter Barker
e7e56dde7a
Copter: move handling of RC switches into RC_Channel
2018-08-01 12:11:30 +09:00
Andrew Tridgell
20dea6df45
Copter: moved OSD to top level params
...
this gives us plenty of param depth for a complex param tree
2018-06-27 14:55:00 +10:00
Alexander Malishev
f63b3c044a
Copter: added OSD support
2018-06-27 14:55:00 +10:00
Michael du Breuil
749e0acd10
Copter: Remove software type param
2018-06-05 09:14:12 +10:00
Randy Mackay
bf6e1993a1
Copter: resolve compiler warning re temp_calibration init order
2018-04-11 11:31:17 +09:00
Randy Mackay
59e4749fd0
Copter: integrate AC_Loiter
...
includes param conversion
2018-04-04 10:45:10 +09:00
Michael du Breuil
291531e056
Copter: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Dr.-Ing. Amilcar do Carmo Lucas
580143d404
Copter: Add whitespaces to increase readability and consistency (NFC)
2018-03-23 09:34:11 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
4f0cf6d334
Copter: Parameter ACRO_THR_MID is only used in ACRO flight mode
2018-03-23 09:14:23 +09:00
Leonard Hall
9544b1763b
Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc
2018-03-16 13:50:57 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
115ed491c0
Copter: Obey RANGEFINDER_ENABLED, AUTOTUNE_ENABLED and AC_TERRAIN build macros
2018-03-15 15:03:22 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
ed36ec3c29
Copter: add option to disable THROW mode
2018-03-15 07:38:14 +09:00
Peter Barker
af56826107
Copter: follow mode fixups
...
add follow to FLTMODEx param descriptions
remove follow's set_velocity method
10hz logging of desired velocity in follow mode
follow mode uses pos error P gain
add send-debug-via-mavlink option
don't enter follow if follow lib is disabled
follow debug slowed to 1hz
disable follow on min-features builds
2018-03-05 15:08:08 +09:00
Randy Mackay
053983eb70
Copter: integrate AP_Follow into chase mode
2018-03-05 15:08:08 +09:00
night-ghost
adcc309f15
Copter: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
Peter Barker
b8e1f03599
Copter: add define for disabling beacon
2018-02-27 07:43:13 +09:00
Peter Barker
9b440d6b25
Copter: add option to disable SmartRTL mode
...
Saves 5.5k of Flash
2018-02-27 07:43:13 +09:00
murata
c31c2a4cf1
Copter: optionalize the winch
2018-02-12 12:16:57 +09:00
Andrew Tridgell
0ed75052f8
Copter: enable parameters inside mode objects
...
this adds FHLD_* parameters for FlowHold mode. It is a large patch as
it needs to disentagle the mode class to enable it to be used in
Parameters.h
2018-02-08 17:36:33 +11:00
Andrew Tridgell
af4f0c29ba
Copter: enable TMODE (ToyMode) support
...
this is for the skyviper button based transmitter control
2018-02-08 17:36:33 +11:00
Andrew Tridgell
15166eff2e
Copter: enable temperature calibration library
2018-02-08 17:36:33 +11:00
Andrew Tridgell
89674482a7
Copter: added FLTMODE_CH parameter
...
this allows for the flight mode to be on any RC channel, or no channel
at all to disable RC flight modes
2018-01-27 12:01:35 +09:00
Pierre Kancir
cfc69214e6
Copter: add LAND_ALT_LOW parameter
2018-01-24 21:14:35 +09:00
Randy Mackay
8d6f8e4d9c
Copter: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Randy Mackay
6546ccbb3f
Copter: velocity pi moved to position control library
2018-01-23 12:00:43 +09:00
Peter Barker
996115c0d3
Copter: eliminate MAIN_LOOP_SECONDS macro
2018-01-20 15:35:58 +11:00
ChrisBird
caaeae3d0a
Copter: Separate max ascent and descent speeds
...
Added equivalent parameters to WPNAV_SPEED_UP and WPNAV_SPEED_DN
New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN
Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).
Flight Modes impacted:
ALTHOLD
AUTOTUNE
CIRCLE
LOITER
POSHOLD
SPORT
TAKEOFF
Update a section in GUIDED mode but I don't think it is ever used but update just in case.
It will use the PILOT_SPEED_UP for ascending max velocity. For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.
2017-11-09 09:03:54 +09:00
Randy Mackay
787954fa37
Copter: integrate winch library
...
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
squilter
4b57a4a231
Copter: rename SafeRTL to SmartRTL
2017-09-09 14:05:41 +09:00
squilter
ba0e08552f
Copter: add SafeRTL flight mode
2017-09-09 14:05:41 +09:00
Peter Barker
c6b9c84d1f
Copter: remove CLI
2017-08-14 10:23:50 +09:00
Eugene Shamaev
24c390ade0
ArduCopter: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Randy Mackay
713c08672f
Copter: integrate AP_VisualOdom
2017-04-19 11:04:40 +09:00
Peter Barker
bd6ffc025e
Copter: start conversion to AP_Arming_Copter
2017-01-17 11:45:08 +09:00
Andrew Tridgell
5a87ae3f01
Copter: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Randy Mackay
e32ddaa7fa
Copter: reorder beacon and proximity declaration
...
resolves compiler warning
2017-01-04 19:58:53 +09:00
Randy Mackay
12d024e0c6
Copter: rename FRAME to FRAME_TYPE
...
This unifies the plane and copter parameter names
2016-12-31 10:55:23 +09:00
Randy Mackay
0ac00dbfd6
Copter: add FRAME_CLASS parameter
2016-12-31 10:55:23 +09:00
Andrew Tridgell
c3b9dbf5c8
ArduCopter: Add EKF3 and remove EKF1
2016-12-19 08:07:09 +11:00
Randy Mackay
21c7ea1df7
Copter: integrate AP_Beacon
2016-11-30 17:56:55 +09:00
Peter Barker
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
2016-11-05 10:20:39 +09:00
Peter Barker
920868145c
Copter: support for AP_Gripper
2016-11-05 10:20:33 +09:00
Peter Barker
df07cb525a
Copter: use AP_Stats to store statistics about vehicle
2016-10-29 14:53:25 +09:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
5a9276a5c4
Copter: added SYSID_ENFORCE parameter
...
allows enforcement of SYSID_MYGCS
2016-10-15 17:14:19 +11:00
Leonard Hall
5c47f3f9e5
Copter: add acro throttle and yaw expo and smoother manual pilot throttle
2016-10-15 11:27:53 +09:00
Randy Mackay
0aab175051
Copter: move proximity to g2
2016-10-14 14:02:29 +09:00
Randy Mackay
fcc2a1b378
Copter: integrate AP_Proximity into main vehicle
2016-10-13 20:21:07 +09:00
Andrew Tridgell
d0dd10aeea
Copter: added DEV_OPTIONS parameter
...
this is for little used options to allow standard firmware builds to
enable those options for development purposes
First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Andrew Tridgell
f18e0dadc9
Copter: added optional AdvancedFailsafe for copter and heli
2016-08-25 14:14:18 +10:00
Andrew Tridgell
89c10a2db9
Copter: rename WP_TKOFF_NAV_ALT to WP_NAVALT_MIN
...
this is in preparation for using the same parameter for landing as
well
2016-08-16 11:26:56 +10:00
Randy Mackay
9842840346
Copter: GND_EFFECT_COMP parameter to enable ground effect compensation
2016-08-09 13:31:36 +09:00
chambana
25940c8e0f
Copter: add THROW_TYPE and allow dropping vehicle to trigger motors
2016-08-02 20:25:52 +09:00
Randy Mackay
f0f87a2f0c
Copter: add throw_nextmode
...
vehicle switches to mode specified in THROW_NEXTMODE parameter after the
throw is completed.
2016-08-02 20:25:52 +09:00
Randy Mackay
d50987f976
Copter: avoidance_adsb implements copter avoidance using ADSB
2016-07-25 20:24:37 +09:00
Andrew Tridgell
cb5ca713a9
Copter: added AP_Button support
2016-07-22 15:01:20 +10:00
Andrew Tridgell
3a8ed06267
Copter: added TKOFF_NAV_ALT parameter
...
this adds TKOFF_NAV_ALT which controls the altitude above takeoff that
navigation can begin. It is meant for unstable vehicles such as helis
to prevent blade strike during initial takeoff.
This also adds a new parameter class ParametersG2 which can hold 64
parameters. This is to avoid running out of parameters in the first
256 block
2016-07-07 14:21:47 +09:00
Daniel Ricketts
87be8daf0e
Copter: integrate AC_Avoidance library
2016-06-22 11:38:15 +09:00
Leonard Hall
48eb4cf674
Copter: remove THR_MID
2016-06-18 11:55:49 +09:00
Leonard Hall
dec9323127
Copter: remove THR_MIN
...
Equivalent is AP_Motors SPIN_MIN
2016-06-18 11:55:49 +09:00
Andrew Tridgell
045e3c179a
Copter: moved EKF2 to a new parameter index
...
the meanings of many of the parameters have changed. Best to use a new
index to prevent old parameters from causing crashes
2016-05-25 19:35:17 +10:00
Randy Mackay
7689315ba2
Copter: rename sonar to rangefinder
2016-05-21 10:36:53 +09:00
Randy Mackay
74e02d2c82
Copter: rename TERRAIN_USE to TERRAIN_FOLLOW
...
This matches plane's parameter name
2016-04-30 10:33:01 +09:00
Randy Mackay
91f6c7b503
Copter: add TERRAIN_USE parameter
...
Also add terrain.cpp to hold terrain_update and terrain_logging functions
2016-04-30 10:33:01 +09:00
Randy Mackay
bde498375c
Copter: remove attitude PIDs
...
These are now part of AC_AttitudeControl
2016-04-01 11:59:30 +09:00
Randy Mackay
1f37f5a0e7
Copter: remove tradheli swash, yaw and rsc servos
...
These are all created within the AP_MotorsSingle class now except for servo_rsc which was unused
2016-04-01 11:59:30 +09:00
Leonard Hall
6c40d6f774
Copter: remove single frame's servo objects
2016-04-01 11:59:30 +09:00
Leonard Hall
44180e44df
Copter: remove coax servo objects
...
servos moved to AP_MotorsCoax class
2016-04-01 11:59:30 +09:00
Leonard Hall
a00a9601a4
Copter: AP_MotorsCoax now uses 4 servos
2016-04-01 11:59:30 +09:00
Andrew Tridgell
f19922fec5
Copter: added LAND_SPEED_HIGH parameter
...
this is the descent rate for the first part of a landing. Separating
this from WPNAV_SPEED_DN allows for independent tuning of fast fwd
flight from landings
2016-03-30 15:54:20 +11:00
Lucas De Marchi
e88ba38595
ArduCopter: replace header guard with pragma once
2016-03-16 18:40:44 +11:00