Peter Barker
4aaeb4bfed
Copter: get mav heartbeats out when board detection fails
2017-01-27 13:48:23 +09:00
Dmitry Prokhorov
3e993f955e
ArduCopter: Support for OLED display by Alexey Kozin
2017-01-23 15:07:20 -08:00
Andrew Tridgell
0f6d0c5ba9
Copter: combined tri, single, coax and multicopter into a single build
...
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Andrew Tridgell
5a87ae3f01
Copter: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Francisco Ferreira
11b635df12
Copter: correct limit status to fence status
2017-01-12 02:00:51 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
712fbfe84b
Copter: Update descriptions of stream rate parameters
2017-01-12 01:47:12 +00:00
Randy Mackay
20ca021cab
Copter: pass distance-sensor messages to AP_Proximity
2017-01-11 21:48:23 +09:00
Randy Mackay
0ac00dbfd6
Copter: add FRAME_CLASS parameter
2016-12-31 10:55:23 +09:00
Randy Mackay
c1d1ac5c6f
Copter: pass HIL_GPS to gps driver
2016-12-08 15:52:26 +09:00
Randy Mackay
7485de3498
Copter: add send_proximity to send distances to GCS
2016-11-27 15:05:46 +09:00
Peter Barker
469f0f0bf0
Copter: remove incorrect comment from PRECISION_LANDING block
2016-11-18 09:41:56 +09:00
Francisco Ferreira
84436ff5ae
Copter: sipport MAV_CMD_ACCELCAL_VEHICLE_POS
2016-11-15 11:42:54 -08:00
Andrew Tridgell
df3e434607
Copter: use handle_common_message()
2016-11-09 17:08:09 +11:00
floaledm
53fcbcb6c3
Copter: send ahrs groundspeed estimate instead of GPS groundspeed in VFR_HUD message
2016-11-07 09:14:28 +11:00
Peter Barker
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
2016-11-05 10:20:39 +09:00
murata
965a6a5719
Copter: To nullptr from NULL.
2016-10-28 10:53:31 -07:00
Andrew Tridgell
1b46a71596
Copter: also update sensor status before mavlink send
...
this removes the 1 second lag in updates when using the one second
loop
2016-10-28 10:05:40 +11:00
floaledm
34718b130a
Copter: update sensor status error flags independently of sending a sys_status message
...
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
2016-10-28 10:03:38 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
57830784e2
Copter: use handle_rc_bind
2016-10-15 21:42:38 +11:00
Andrew Tridgell
5a9276a5c4
Copter: added SYSID_ENFORCE parameter
...
allows enforcement of SYSID_MYGCS
2016-10-15 17:14:19 +11:00
Randy Mackay
0aab175051
Copter: move proximity to g2
2016-10-14 14:02:29 +09:00
Andrew Tridgell
ebbcabcb5f
Copter: fixed comment
2016-10-14 11:40:09 +11:00
Randy Mackay
1665f4d416
Copter: report altitude and position control of new modes in sys-status message
2016-10-13 20:21:07 +09:00
Randy Mackay
4afa49eebe
Copter: report proximity health in system-status
2016-10-13 20:21:07 +09:00
Andrew Tridgell
652b6b7564
Copter: deprecate RC_CHANNELS_RAW
2016-10-13 21:24:02 +11:00
Michael du Breuil
ea45e5e6f1
Copter: Support GPS_RTCM_DATA
2016-10-11 11:00:36 +11:00
Lucas De Marchi
b24d850695
ArduCopter: Fix use of logical op instead of bitwise op
...
../../ArduCopter/GCS_Mavlink.cpp: In member function 'void Copter::send_extended_status1(mavlink_channel_t)':
../../ArduCopter/GCS_Mavlink.cpp:281:37: error: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Werror=parentheses]
uint32_t sensors_error_flags = !control_sensors_health & control_sensors_enabled & control_sensors_present;
^
compilation terminated due to -Wfatal-errors.
cc1plus: all warnings being treated as errors
Thanks to Ralph Campbell <ralphcampbell1@gmail.com> for the bug report.
2016-09-29 11:36:23 -03:00
Tom Pittenger
748beb094d
Copter: log to dataflash statustext messages from my_gcs
2016-09-26 00:13:30 -07:00
floaledm
5910c94b65
Copter: change sensor health check to prevent false positive
2016-09-22 13:56:49 -05:00
Andrew Tridgell
d0dd10aeea
Copter: added DEV_OPTIONS parameter
...
this is for little used options to allow standard firmware builds to
enable those options for development purposes
First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Michael du Breuil
bec4bfa2ba
Copter: Return RESULT_FAILED for GET_CMD_HOME if home is unset
2016-09-03 16:54:16 +09:00
Randy Mackay
a8a31b1c24
Copter: fix health reporting to GCS for optical flow and precision landing
...
Includes slight restructuring to logic for other sensors but these should not have any functional effect
2016-08-31 13:59:16 +09:00
Andrew Tridgell
96de005591
Copter: moved MAV_TYPE define to defines.h
2016-08-25 10:16:20 +10:00
Andrew Tridgell
a14ff8ac77
Copter: fixes for Frsky_Telem API changes
2016-08-25 10:16:20 +10:00
floaledm
157db51b9d
Copter: make control_sensor vars available outside of send_extended_status1
2016-08-25 10:16:18 +10:00
Tom Pittenger
06b64000e1
Copter: move mavlink msg handling into library
2016-08-16 16:33:36 -07:00
Tom Pittenger
d04a5d58fd
Copter: decode correct ADSB packet
2016-08-16 16:33:36 -07:00
Tom Pittenger
dbdd86ad46
Copter: set SYS_STATUS and HB_Flag Guided bits when in AVOID_ADSB
2016-08-12 14:46:44 -07:00
Peter Barker
4371223738
Copter: add dataflash as a bit for the mavlink SYS_STATUS message
2016-08-11 17:48:44 -03:00
Randy Mackay
0ed5665193
Copter: change parameter order of guided_set_angle
...
I thought it might be slightly better to put the optional parameters at the end
No functional change
2016-08-10 10:03:54 +09:00
Allan Matthew
6dd4e1a2aa
Copter: accept yaw rate commands in Guided atttude controller
2016-08-10 10:03:37 +09:00
Randy Mackay
4e92f08bf1
Copter: only accept attitude targets in Guided mode
2016-08-02 18:26:04 +09:00
Randy Mackay
1161417d7f
Copter: add GUIDED_NOGPS flight mode
...
This mode is a cut down version of Guided mode that only accepts attitude commands.
This mode does not require a GPS lock
2016-08-02 18:25:59 +09:00
Lucas De Marchi
c0b49f6aeb
ArduCopter: Remove i2c lockup count
...
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
2016-07-28 18:03:09 -03:00
Randy Mackay
68899ed921
Copter: add adsb to failsafe structure and report in heartbeat to GCS
2016-07-25 20:24:37 +09:00
Randy Mackay
f4db4bdb08
Copter: GCS_MAVLink passes packets to AP_Avoidance
...
This allows treating GLOBAL_POSITION_INT packets from other vehicles in the same way as ADSB packets
2016-07-25 20:24:37 +09:00
Andrew Tridgell
387da40fc5
ArduCopter: adjust for 16 channels in SERVO_OUTPUT_RAW
2016-07-25 10:06:02 +10:00
Tom Pittenger
07a838937e
Copter: handle ADSB-Out packets
2016-07-22 13:38:37 -07:00
Andrew Tridgell
e943a48eba
Copter: added PLAY_TUNE message
2016-07-22 15:00:17 +10:00