edaf2b9641
Based on Doug's recommendation - increased Accel weighting to .66 – 1.33 Gs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2557 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 23:37:43 +00:00
b35d0677d0
the temp change in the state machine didn't really help the altitude issue after all. Need more testing as the temp sway is the major factor in the lack of air pressure accuracy.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2556 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 15:46:38 +00:00
40c6b592df
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2555 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 06:05:18 +00:00
7ad6bff177
reworked filter on temperature.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2554 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 05:08:11 +00:00
8fb19f4092
removed filter on temp, was causing init problems.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2553 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 04:51:07 +00:00
2651cadb84
Adjusted the state machine to read the temperature less often (from twice a second to every 4 seconds). Added a small smoothing filter.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2552 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:57:36 +00:00
c1ddd58d4c
Implemented moving average filter to deal with noise issues on quads, default is a 6 member filter.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2551 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:50:15 +00:00
595266152b
Added dynamic setting of kp_rollpitch, ki_rollpitch, kp_yaw.
...
Added three constants for kp_rollpitch, (high, med -default, low)
Functionally equivalent to prior version.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2550 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:49:01 +00:00
73004e45dc
Add a method to BetterStream and FastSerial that can be used to report
...
the amount of data that can be written without blocking.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2549 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 22:26:39 +00:00
7845bba097
Traditional Heli - merged heli code into ACM trunk code!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2548 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 12:14:10 +00:00
96cb7d2fc0
Add clearOverride message to allow failsafe recovery from joystick control
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2540 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-11 23:59:35 +00:00
505cee674a
ArduCopterMega - Parameters.h - updated eeprom format_version to 9 to force refresh of eeprom because of RC_Channel change to store reverse setting.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2529 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-10 03:36:34 +00:00
499cbec9e5
RC_Channel.h - small change to store _reverse setting to eeprom
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2528 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-10 03:33:31 +00:00
732a36960e
sync rawgps test with APM 2x rawgps test
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2501 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-06 13:35:46 +00:00
7925c97354
add mag 5883L part3
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2476 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-04 03:20:44 +00:00
119ac75511
add mag 5883 support part 2
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2474 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-04 01:23:40 +00:00
19c6f87821
adding 5883 mag support part 1
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2473 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-04 01:22:04 +00:00
8a19c0a392
2.0.23, Hexa Fix, Baro and Sonar tests now separated.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2464 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-03 18:49:13 +00:00
0cf30d93d0
2.0.12, minor fixes.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2463 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-03 05:36:39 +00:00
18a9ff6f80
AP_Compass - added support for HMC5883L
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2461 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-01 13:21:20 +00:00
ed7e0d1660
AP_Compass - added support for HMC5883L
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2460 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-01 13:16:18 +00:00
142f5a5f49
Updates for 2.0.21
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2459 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-01 05:50:17 +00:00
e4cd549599
AP_OpticalFlow - moved chip select pin so it doesn't interfere with AP_ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2452 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-31 13:46:56 +00:00
0fcb129485
ACM - small bug fix to remove extra bracket
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2451 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-31 12:56:58 +00:00
f4dd8a4f99
2.0.20
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2449 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-31 05:39:58 +00:00
9abd8c6336
Big update from Field testing.
...
Includes updated motor tests. These need to be verified.
Nav loiter D was added (.03) - verify this helps.
Nav_lat is now filtered for Rate control. This is to keep jerky pitching to a minimum.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2448 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-31 05:29:06 +00:00
c66611cceb
minor formatting
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2441 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-30 04:24:07 +00:00
f5700c75c8
Fix bug for GCS joystick control
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2440 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-30 03:44:07 +00:00
dcbf161c41
moved mode logging to end of function for better throttlehold recording
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2435 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-29 20:27:14 +00:00
f747e39062
Better sonar hold ++
...
added mag calibration - still not sure if needed.
better sonar spike filter
2.0.19
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2434 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-29 19:32:55 +00:00
1d21056f21
2.0.18
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2433 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-29 04:02:01 +00:00
85fde4a6cf
Better Yaw P values, better Sonar hold values.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2429 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-28 06:52:56 +00:00
7b185ca23d
missed saving a file.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2424 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 23:35:08 +00:00
4bce9465a6
Change setHIL to return a bool based on if GCS joystick control is active
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2423 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 23:15:29 +00:00
a42a939cc9
2.0.16, Now that Yaw PID vs PI issue is sorted, this is reverting back to Rate based Yaw.
...
Made minor change in Loiter to check something.
Motor LEDs enabled. Let me know if they work OK.
Armed Motors is now Solid to match GPS behavior.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2421 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 18:21:55 +00:00
0d1f184076
minor changes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2420 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 17:58:39 +00:00
ee67f964a1
Added back in Mag offsets in CLI. Don' t know if it works yet!
...
removed CH_3 refs in Tri, fixed Yaw repoting bug for unsigned int
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2406 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 04:59:01 +00:00
eda421e8ea
Alt Hold updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2405 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-26 19:57:19 +00:00
8088f24427
Yaw updates. 2.0.13
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2403 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-26 05:58:17 +00:00
1ff40b053a
Log FIx
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2402 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-26 01:50:32 +00:00
2a53e35ac7
2.0.12 Very small Yaw Iterm added. reverted to earlier Loiter limit.
...
Slight tweak to Alt hold.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2397 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-25 05:48:33 +00:00
4a1772b5ff
http://code.google.com/p/arducopter/issues/detail?id=161
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2395 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 05:17:12 +00:00
6d3039793d
Yaw Alternate enabled by default.
...
Yaw dead_zone minimized
revved to 2.0.11
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2394 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 05:04:48 +00:00
bd69d3f014
Adjusted gains for alt hold.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2393 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 04:58:53 +00:00
bd64dd9770
Added resetting of Loiter location based on stick input. Fly it to a location and let it stick.
...
Added Octo Support
Fixed Loiter issue regarding Yaw towards loiter location
Added Yaw control alternative for testing
decreased Yaw deadband to +-5°
revved to 2.0.10
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2392 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 02:23:26 +00:00
1f222a4a5c
Added resetting of Loiter location based on stick input. Fly it to a location and let it stick.
...
Added Octo Support
Fixed Loiter issue regarding Yaw towards loiter location
Added Yaw control alternative for testing
decreased Yaw deadband to +-5°
revved to 2.0.10
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2391 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 02:23:02 +00:00
2a3b994d51
Added resetting of Loiter location based on stick input. Fly it to a location and let it stick.
...
Added Octo Support
Fixed Loiter issue regarding Yaw towards loiter location
Added Yaw control alternative for testing
decreased Yaw deadband to +-5°
revved to 2.0.10
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2390 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 02:18:30 +00:00
2118931cdc
Added resetting of Loiter location based on stick input. Fly it to a location and let it stick.
...
Added Octo Support
Fixed Loiter issue regarding Yaw towards loiter location
Added Yaw control alternative for testing
decreased Yaw deadband to +-5°
revved to 2.0.10
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2389 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 02:14:18 +00:00
c0ae14cc5c
Minor Gain fix. Roll and Pitch were sligtly different. Not enough to merit any point revision.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2383 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-23 19:33:18 +00:00
78f02b51a0
updates to get alt hold from 2.0.7.
...
Cleanups, better logs for Alt hold, yaw debugging
I tuned up Hein's Hexa Yaw. I think we may need to adjust Yaw gains based on Frame type.
Crossing fingers, the next rev is the final.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2381 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-23 05:53:00 +00:00
jasonshort
DrZiplok
rmackay9@yahoo.com
deweibel@gmail.com
dhcorley@msn.com