221ab9752e
AP_InertialSensor: synchronise fifo reads on the ICM42xxx
2022-08-12 20:53:36 +10:00
e4ce4ebed3
AP_InertialSensor: remove un-needed methods
2022-07-19 10:30:36 +10:00
9ac3472b47
AP_InertialSensor: add set_inactive() on notch filters
2022-06-30 20:58:37 +10:00
a37f268dc6
Ap_Inertialsensor: by default only run harmonic notch on the active gyro
...
this should save quite a lot of CPU. Only the active gyro impacts
vehicle flight
2022-06-12 15:39:44 +10:00
19063a46a0
AP_InertialSensor: fixed build with logging disabled
...
fixes CubeOrange-periph build
2022-06-06 14:50:40 +10:00
db14ba46dc
AP_InertialSensor: call notch param update with semaphore held
2022-04-19 09:39:03 +10:00
e2e1e74da5
AP_InertialSensor: switch to HarmonicNotch class
...
this makes the logic much easier to follow, without indexes into
arrays
2022-04-19 09:39:03 +10:00
e67d9b4179
AP_InertialSensor: support two full harmonic notch filters
2022-04-19 09:39:03 +10:00
b77476caa1
AP_InertialSensor: remove custom orentations
2022-03-02 18:16:42 +11:00
c7a43f2a90
AP_InertialSensor: put some functions in fast ram
...
precisely split backend/frontend on Invensense for RAMFUNC allocation
allow building with no IMUs
2022-02-09 12:47:55 +00:00
662327f2ea
AP_InertialSensor: added support for more ADIS IMUs
...
support 32 bit delta angles and velocities
2021-12-29 18:25:18 +11:00
6e3b502110
AP_InertialSensor: inline vector ops for backends and temp cal
2021-12-22 18:23:33 +11:00
c6734ad825
AP_InertialSensor: correct logging of inertial-sensor reg-change logging
2021-12-18 21:25:27 +11:00
4fdc1ebc30
AP_InertialSensor: fixed locking issue in delta accumulation
...
this fixes a bug in calculating delta velocity and delta acceleration
between threads.
2021-08-31 10:10:18 +10:00
447935bf4c
AP_InertialSensor: remove dependence on gcs for AP_Periph builds
2021-06-30 17:06:02 +10:00
2b20dcf128
AP_InertialSensor: move GYR & ACC logging functions to Logging.cpp
2021-05-01 14:15:58 +10:00
4cddf37984
AP_InertialSensor: log unexpected register changes
...
when the register checking code finds an error we will log what
register changed and to what value
2021-02-24 18:18:37 +11:00
3ff71c7814
AP_InertialSensor: changes from review feedback
2021-01-21 13:09:21 +11:00
8caea96ab1
AP_InertialSensor: start auto-learning at boot
...
This makes it easier to setup the params. The ENABLE=2 value only
takes effect at boot
2021-01-21 13:09:21 +11:00
fc0f8b990a
AP_InertialSensor: added online learning of temp cal
...
use INS_TCAL1_ENABLE=2 to start learning
2021-01-21 13:09:21 +11:00
7921e042f1
AP_InertialSensor: added IMU temperature calibration support
...
this adds parameters that can be setup by an external script for
compensating for temperature variation in gyros and accels using a 3rd
order polynomial
2021-01-21 13:09:21 +11:00
b74e5c0e2f
AP_InertialSensor: added ExternalAHRS backend
2021-01-05 21:13:12 +11:00
2437cf8a24
AP_Logger: use instance number for IMU logging
2020-11-11 19:31:53 +11:00
faf9bbbf3a
AP_InertialSensor: make the backend fast gyro rate configurable
...
raise gyro rate default on F7 and H7
clean up gyro rate docs and output startup banner
2020-07-10 16:45:29 +10:00
61bb42cc0c
AP_InertialSensor: allow up to four distinct notch center frequencies to be updated
...
apply the LPF after the notch filters to reduced notch-induced noise
2020-06-21 19:09:35 +10:00
8ac79da643
AP_InertialSensor: FFT gyro window would overflow on windows >= 256
...
convert FFT buffers to ObjectBuffer<float> for lock-free access
push gyro samples directly into the FFT ring buffer from the gyro thread
2020-05-24 07:43:34 +10:00
5c6749ee54
AP_InertialSensor: use wait_pin() to wait for DRDY pin if available
2020-04-23 07:28:13 +10:00
0e9b2a26c5
AP_InertialSensor: SITL the raw sample rate is not the same as the sensor rate
...
use regulated time for frequency noise to avoid spurious harmonics
SITL sensors must be true separate instances
don't compile in FFT structures if DSP disabled
2020-02-22 11:15:37 +11:00
3d9776dd6d
AP_InertialSensor: expose statically filtered gyro values for FFT analysis and allow sampling to gyro window for FFT analysis.
...
FFT windows can be dynamically allocated
add harmonic notch dynamic tracking mode
unwind gyro window allocation in the case of failure
allow access to harmonic notch harmonics
2020-02-22 11:15:37 +11:00
143a071788
AP_InertialSensor: add rpm-based motor noise to gyros and accels
...
Remove sample time error in backend.
2019-12-17 10:07:06 +11:00
236ce28339
AP_InertialSensor: updated for heater changes
2019-11-02 16:31:04 +11:00
8e385d7453
AP_InertialSensor: correct formatting
2019-09-11 18:41:05 +10:00
5b7f9f6bea
AP_InertialSensor: while sensors are converging update the filters sample rates. if gyro filtering produces invalid output, keep the previous value
2019-09-11 18:41:05 +10:00
3261677e01
AP_InertialSensor: remove _ prefix from methods. use changed filter methods.
2019-09-11 18:41:05 +10:00
50f7e50634
AP_InertialSensor: add harmonic notch filter to gyro filter chain
...
Allow dynamic updates to the calculated frequency. Convert bandwidth and frequency to floats.
backend variables do not need to be indexed per-backed
2019-09-11 18:41:05 +10:00
09d3392aee
AP_InertialSensor: zero accumulators on time step
...
this zeros the delta angle and delta velocity accumulators when a
sensor is unavailable for a period of 0.1s. This prevents garbage
values being passed into the EKF when a sensor dies and then becomes
available again some time later
2019-07-07 19:03:01 +10:00
3444e82ef9
AP_InertialSensor: added RC switch for killing IMUs
2019-07-07 19:03:01 +10:00
fff81a2163
AP_InertialSensor: Make sure the LPF output is used by the notch input.
2019-06-06 17:09:17 +10:00
18d403c3ac
AP_InertialSensor: Rework notch filter allocation and sampling
...
https://github.com/ArduPilot/ardupilot/issues/11346
Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
2019-06-06 17:09:17 +10:00
ef860db558
AP_InertialSensor: add floating point constant designators
2019-04-05 23:04:17 -07:00
3eeaa2c8df
AP_InertialSensor: rename dataflash to logger
2019-03-28 16:40:57 +11:00
9347e6d36f
AP_InertialSensor: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
755dc8dc5d
AP_InertialSensor: use WITH_SEMAPHORE()
...
and removed usage of hal.util->new_semaphore()
2018-10-17 12:54:22 +11:00
1a640e3405
AP_InertialSensor: parameterise sensor-rate logging, generalise it
...
AP_InertialSensor: add parameters for push-to-log interval and count
AP_InertialSensor: rename BAT_RAW to BAT_OPT
This becomes a bitmask of options for the BatchSampler
AP_InertialSensor: rename 'fast sample' to 'sensorrate sample'
AP_InertialSensor: const sensor-rate filter method
AP_InertialSampler: remove hard-coding of sample rate multiplier
AP_InertialSensor: use parameter to enable/disable sensor-rate logging
AP_InertialSensor: use a parameter to control sensor-rate logging
AP_InertialSensor: allow backends to override sensor data multiplier
e.g. some accelerometers are sensitive over wider ranges than the default 16G
AP_Inertialsensor: correct sample rate multiplier
2018-05-01 09:35:29 +10:00
44131202cd
AP_InertialSensor: 4kHz batch sampling
2018-05-01 09:35:29 +10:00
ad4e928e7d
AP_InertialSensor: add support for custom board orientations
2018-04-24 13:04:37 +01:00
0e6497aa85
AP_InertialSensor: merged in Revo driver
2018-02-10 09:14:41 +11:00
9566abb3a8
AP_InertialSensor: add IMU batch sampling
2017-10-27 16:33:45 +11:00
5096e2fca9
AP_InertialSensor: use df singleton, factor out log_{gyro,accel}_raw
2017-10-27 16:33:45 +11:00
Andy Piper
Peter Barker
Andrew Tridgell
Iampete1
Siddharth Purohit
Josh Henderson
Tom Pittenger
Jacob Walser