Commit Graph

4565 Commits

Author SHA1 Message Date
Henry Wurzburg 5169382677 Plane: Make mode takeoff entry climb to TKOFF_ALT before loitering 2023-07-04 12:17:51 +09:00
Henry Wurzburg c3528c5c9e Plane: fix error in Qplane wait for rudder neutral 2023-07-04 12:17:51 +09:00
Andrew Tridgell abb3bcfb1d Plane: prepare for 4.4.0beta2 2023-07-04 12:17:51 +09:00
Andrew Tridgell 6d71a4a5c6 Plane: adjust 4.4.0beta2 release notes 2023-07-04 12:17:51 +09:00
Andrew Tridgell 245851b9b5 Plane: release notes for 4.4.0-beta2 2023-06-08 10:05:36 +09:00
Andrew Tridgell 32a0194940 Plane: fixed release notes history
was missing 4.3.5
2023-04-22 13:01:06 +10:00
Andrew Tridgell 7fd85dd860 Plane: prepare for 4.4.0beta1 2023-04-21 09:48:59 +10:00
Andrew Tridgell 06b39878f7 Plane: release notes for 4.4.0beta1 2023-04-21 09:48:59 +10:00
bugobliterator 75aaebc758 ArduPlane: change INS_ to INS 2023-03-21 10:04:16 +11:00
Tom Pittenger 3ac55f97b1 Plane generalize Aux Switch VTOL abort for any plane abort landings 2023-03-15 13:31:43 -07:00
Henry Wurzburg a86ff90b97 ArduPlane: add AUTO VTOL landing abort AUX sw 2023-03-14 10:52:23 +11:00
Randy Mackay c12e15f580 Plane: remove unused do-control-video 2023-03-09 12:24:05 +11:00
Iampete1 d97bd6f5c3 Plane: titrotor: is_motor_tilting: dont cast to uint8 2023-03-07 10:28:11 +11:00
Tom Pittenger 96ee3651d2 Plane: Auto takeoff roll-limits to use TKOFF_LVL_ALT 2023-03-02 09:24:13 +11:00
Randy Mackay d9795d3580 Plane: integrate camera frontend/backend split 2023-03-01 18:18:51 +11:00
Andrew Tridgell 8637f2d9c6 Plane: release notes for 4.3.4 2023-03-01 12:58:01 +11:00
Andrew Tridgell a0634d8b5b Plane: constrain tilt range for vectored yaw
this prevents a case where we can demand unlimited vectored yaw,
leading to loss of control

this was particularly noticible before the fix in #23023 - if you
armed for a 2nd time in QHOVER after moving the throttle above 10% so
throttle_wait was cleared then the motors would try to tilt fully so
one motor is in fwd flight position. This would cause a prop strike
while on the ground
2023-02-26 08:52:16 +11:00
Andrew Tridgell 38d7bcff6b Plane: re-init throttle wait on quadplane arm and disarm
this prevents yaw from rudder arming on 2nd flight
2023-02-26 07:06:09 +11:00
Tom Pittenger 7a6f398668 Plane: add TKOFF_GND_PITCH 2023-02-23 11:12:39 +11:00
Iampete1 eefa3b1ce4 Plane: move training mode function to mode training 2023-02-22 19:26:59 +11:00
Iampete1 f6b0c3775c Plane: move mode acro functions to mode acro 2023-02-22 19:26:59 +11:00
Peter Barker c18276e19b ArduPlane: add support for mavlink in-progress message 2023-02-21 17:07:41 +11:00
Iampete1 50eaa1cc54 Plane: move acro stabilization into mode acro 2023-02-21 11:27:24 +11:00
Iampete1 6bb0096b9d Plane: move training stabilize function to training mode 2023-02-21 11:27:24 +11:00
Iampete1 549dd3875d Plane: add mode ahrs convenience refence 2023-02-21 11:27:24 +11:00
Andrew Tridgell a57e6455ab Plane: use is_armed_and_safety_off()
this no longer sets soft_armed false when safety is on, and instead
uses is_armed_and_safety_off() when appropriate
2023-02-21 07:44:09 +11:00
Iampete1 5586f4ad3a Plane: arming: modes: don't always display 2023-02-20 10:55:32 +00:00
Andrew Tridgell 312d37306e Plane: ensure home is up to date on arming
remove any discrepancy which has crept in over the last few seconds

this also ensures that relative_altitude is updated, and copes with
the EKF refusing the resetHeightDatum call
2023-02-19 10:45:42 +11:00
Iampete1 2ffe677d39 Plane: combine per mode arm and pre-arm checks 2023-02-15 19:43:40 +11:00
Andrew Tridgell 4a96221a70 Plane: release notes for 4.3.4-beta1 2023-02-12 17:37:07 +11:00
Andrew Tridgell 99f997161a Plane: holdoff auto takeoff till rudder neutral
when arming with rudder we need to hold off the takeoff until the user
has released the rudder stick or we can yaw badly during the takeoff
2023-02-09 07:02:32 +11:00
Andrew Tridgell 2989e2deba Plane: added support for NAV_PACKAGE_PLACE mission item
this works in conjunction with a lua script to allow for a wide
variety of package place options
2023-02-09 07:02:12 +11:00
Peter Barker 648a13d3f7 ArduPlane: add and use AP_ADVANCEDFAILSAFE_ENABLED 2023-02-08 19:00:13 +11:00
Andrew Tridgell 7735614634 Plane: implement set_rudder_offset() 2023-02-08 16:25:39 +11:00
Pierre Kancir 321801a2c3 Plane: unify firmware name 2023-02-08 12:47:49 +11:00
Iampete1 d928e8b002 Plane: stop passing speed_scaler all over the place 2023-02-07 10:17:09 +11:00
Peter Barker f0e17957f4 ArduPlane: avoid using struct Location
clang reports this could be a problem when compiling under some EABIs.  Remove it from most places as it is just noise, replace with class where we want to avoid including Location.h
2023-02-04 22:51:54 +11:00
TsuyoshiKawamura 220e58ca6d Plane: correct spelling in ReleaseNotes.txt 2023-02-01 14:16:28 +00:00
Iampete1 2d51b2c9b8 Plane: remove direct roll/pitch stick mixing support 2023-02-01 18:45:10 +11:00
Iampete1 a63a32d6f3 Plane: QRTL: combine threshold radius for QRTL and RTL 2023-01-31 10:57:21 +11:00
Henry Wurzburg 10b69e1c1f Plane:expand yaw autotune to other modes 2023-01-31 10:02:16 +11:00
Andrew Tridgell 6623f1156c Plane: transition pitch limit should not apply to FBWA
pilot should be able to override pitch, very important on motor
failure to control glide
2023-01-30 09:19:14 +11:00
Iampete1 76a10d9b26 Plane: relative_ground_altitude allow passing bool for terrain use 2023-01-25 19:34:53 +11:00
Iampete1 928a923f43 Plane: Quadaplane: QRTL use stopping point for climb submode altitude threshold 2023-01-25 19:34:53 +11:00
Iampete1 bf9d49b72d Plane: Quadaplane: add param for min QRTL altitude when close to home 2023-01-25 19:34:53 +11:00
Iampete1 4a2a792624 Plane: QRTL: use cone for QRTL climb close to home 2023-01-25 19:34:53 +11:00
Iampete1 20934491e5 Plane: Quadplane: limit manual throttle tilt angle to Q_TILT_MAX 2023-01-24 10:28:36 +11:00
Iampete1 02ca9c855a Plane: tailsitter: update I reset and limit handling 2023-01-24 10:27:02 +11:00
Iampete1 342d6f21be ArduPlane: use check_enabled helper 2023-01-23 11:00:13 +09:00
Andrew Tridgell 43b4be6ffb Plane: release notes for 4.3.3 2023-01-20 12:17:19 +11:00