Commit Graph

291 Commits

Author SHA1 Message Date
Tom Pittenger
bf11e304f6 AP_Airspeed: improve description of ARSPD_TUBE_ORDR 2022-03-12 08:01:18 +09:00
Iampete1
7ced9b0d32 AP_Airspeed: rename get_health_failure_probability to get_health_probability 2022-03-12 08:01:18 +09:00
Iampete1
8a4f256ad5 AP_Airspeed: Health: use reading from correct airspeed sensor 2022-03-12 08:01:18 +09:00
Michael du Breuil
382cbb9b4d AP_Airspeed: Sanity check DLVR raw data before accumulating it
This is intended to help with really bad RF interference flipping bits on the I2C bus which can lead to some intresting results
2022-02-09 09:00:22 +11:00
murata
629469acbf AP_Airspeed: remove duplicated words from comments 2022-02-07 08:24:14 +09:00
Peter Barker
2d0d2a123d AP_Airspeed: move Airspeed up to AP_Vehicle, use dummy class for Copter 2022-01-19 18:21:32 +11:00
Josh Henderson
1831a1a009 AP_Airspeed: NFC add note about TYPE 0 index 2022-01-19 18:21:32 +11:00
Josh Henderson
bf65b2eba8 AP_Airspeed: move default type for SITL to be for only Plane 2022-01-19 18:21:32 +11:00
Joshua Henderson
3cfbad0f4d AP_Airspeed: add AP_AIRSPEED_ENABLED 2022-01-19 18:21:32 +11:00
Peter Barker
3969d6d56f AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C
These are in celsius
2022-01-13 18:31:46 +11:00
Hwurzburg
7c6816ec70 AP_Airspeed: change UAVCAN in metadata to DroneCAN 2021-12-15 09:53:21 +11:00
Peter Barker
f9580c0dfe AP_Airspeed: add date for parameter conversion code 2021-11-23 12:27:14 +00:00
Josh Henderson
ea4c3d68d6 AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
Iampete1
89c0a8ea04 AP_Airspeed: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Hwurzburg
b327f80946 AP_Airspeed: do not cal if backend does not exist 2021-10-07 13:36:44 +11:00
Iampete1
0731af751a AP_Airspeed: analog: check valid pin 2021-10-06 18:42:51 +11:00
Peter Barker
22e9ad4818 AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Andrew Tridgell
f65620f4f3 AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Josh Henderson
c454cea401 AP_Airspeed: fix MS5525 driver to allow copying driver to 64bit SITL 2021-09-21 09:30:58 +10:00
Peter Barker
16c11fc4fa AP_Airspeed: allow zero offset if we are skipping calibration 2021-09-15 17:52:34 +10:00
Peter Barker
2be49cb42b AP_Airspeed: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
Andrew Tridgell
3f67917c26 AP_Airspeed: check for baro baro data in SDP3X
this matters for SDP3X as AP_Periph sensor with no baro
2021-08-10 07:10:02 +10:00
Andrew Tridgell
cbf549b1eb AP_Airspeed: fixed display of ARSPD_DEVID when ARSPD2_TYPE=0 2021-07-21 18:22:11 +10:00
Andrew Tridgell
5f87335325 AP_Airspeed: review updates
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-07-12 17:14:59 +10:00
Andrew Tridgell
70bb470eb0 AP_Airspeed: fixed AP_Periph build 2021-07-12 17:14:59 +10:00
Andrew Tridgell
0bdd8231cf AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
if the MS4525 has its own LDO then we are should disable the
correction
2021-07-12 17:14:59 +10:00
Andrew Tridgell
ca1508b02e AP_Airspeed: added DEVID parameters for airspeed
this makes log analysis easier
2021-07-12 17:14:59 +10:00
Andrew Tridgell
7f85b413f2 AP_Airspeed: use GCS_SEND_TEXT instead of printf for sensor probe messages 2021-07-12 17:14:59 +10:00
Andrew Tridgell
e6c7970a19 AP_Airspeed: support 3 I2C addresses for MS4525
and if bus number is configured then use only that bus number,
otherwise probe all buses as per existing behaviour
2021-07-12 17:14:59 +10:00
Peter Barker
6da68e39f8 AP_Airspeed: add rc channel option to disable all airspeed sensors 2021-06-23 15:13:13 +10:00
Michael du Breuil
29d6900888 AP_Airspeed: Remove unneeded initilization
We pre zero all memory
2021-06-22 10:08:02 +10:00
Peter Barker
00002b78a4 AP_Airspeed: remove HIL support 2021-06-15 09:47:31 +10:00
QioTek
0190a42e47 AP_Airspeed: added ASP5033 driver 2021-03-28 07:50:34 +11:00
Andrew Tridgell
ea57b1982f AP_Airspeed: cope with no temperature on MSP airspeed 2020-12-08 20:41:12 +11:00
Andrew Tridgell
2d75ef4f60 AP_Airspeed: handle INT16_MIN temperature for UAVCAN sensor 2020-12-08 20:41:12 +11:00
Andrew Tridgell
73fda4e6a7 AP_Airspeed: cope with zero ratio in SDP3X driver
needed for AP_Periph
2020-12-08 20:41:12 +11:00
Andrew Tridgell
857d905d9f AP_Airspeed: added MSP backend 2020-12-08 20:41:12 +11:00
Peter Barker
de2802e322 AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
Without this ARSP[x].Airspeed isn't populated
2020-12-08 11:59:49 +11:00
Hwurzburg
615b8add8c AP_Airspeed: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00
Peter Barker
8647dda8a9 AP_Airspeed: add and use instance number to ARSP message 2020-11-24 12:19:45 +11:00
Iampete1
7aad83ccca AP_Airspeed: add MATLAB based NMEA sensor example 2020-10-27 11:24:49 +11:00
Iampete1
0e41b821e8 AP_Airspeed: defualt to type none on sub 2020-10-27 11:24:49 +11:00
Iampete1
2aff8787c1 AP_Airspeed: add NMEA water speed backend 2020-10-27 11:24:49 +11:00
Iampete1
662d4640ef AP_Airspeed: add dedicated MAX_WIND param 2020-10-27 11:21:04 +11:00
Pierre Kancir
52898cfdbd AP_Airspeed: remove size warning on SDP3X crc function.
Clang-Tidy: Loop variable has narrower type 'uint8_t' (aka 'unsigned char') than iteration's upper bound 'unsigned int'
2020-10-14 07:52:02 +11:00
Andrew Tridgell
505953bdb2 AP_Airspeed: added get_num_sensors() 2020-08-27 20:20:51 +10:00
Andrew Tridgell
a20d3fed94 AP_Airspeed: allow hwdef override of airspeed default type 2020-08-25 09:59:15 +10:00
Siddharth Purohit
d65b43795a AP_Airspeed: move to using CANManager library 2020-08-19 17:31:09 +10:00
Josh Welsh
eb4b5fb720 AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O 2020-08-12 08:02:49 +10:00
Henry Wurzburg
21940cea09 AP_Airspeed: fix airspeed messages for consistency 2020-07-21 09:41:05 +10:00