b5dbdab81e
APM_RC - moved Force_Out0_Out1, Force_Out2_Out3 and Force_Out6_Out6 to APM_RC parent class because it's already implemented in the APM1 and APM2 child classes anyway
2012-03-25 21:13:31 +09:00
ebc55bb494
RC: disable interrupts when reading the RC registers
...
this prevents getting bogus values which could cause a flight mode
change
2012-03-10 10:34:30 +11:00
5f749325f0
APM_RC: allow the fast RC speed to be passed as a parameter
...
this will allow users to test different speeds
2012-03-02 17:57:08 +11:00
41b435a487
Updated fastPWM to 490Hz
2012-02-29 22:17:38 -08:00
83326a9d62
APM_RC_APM2: Add support for CH_10 and CH_11
...
* CH_10 is on APM2 pin A10 (based on A1..A8 convention)
* CH_11 is on APM2 pin A11
* Only the code in enable_out, disable_out, and OutputCh needed to change.
* CH_10 and CH_11 always have an output period of 20ms (50Hz).
2012-02-06 22:11:01 -08:00
ed19c25a97
Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
...
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
9195006541
APM_RC examples: add calls to enable_out after init
2012-01-24 09:09:08 -08:00
602d56304a
APM_RC: PWM outputs are disabled by default on init
2012-01-22 12:03:11 -08:00
276913a950
APM_RC enable_out and disable_out added to APM1 and APM2
...
* Outputs still enabled by default
2012-01-22 12:03:11 -08:00
69ffc7e115
updated channel notes
2012-01-15 10:24:15 -08:00
a19afd926a
APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV
...
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
a separate macro expansion for the MSK value.
2012-01-09 21:57:01 -08:00
7adc80c513
removed newlines to clean up code
2011-12-29 23:02:01 -08:00
d6a8440ef2
APM_RC_APM2: Remove OutputCh from ::Init()
...
* These calls were off by one anyway, by using the channel numbers
as ints ant not CH_n macros, and that caused an ESC cal problem.
2011-12-15 13:47:43 -08:00
56b0be3124
APM_RC: APM1 fast output speed increased to 400hz.
2011-12-10 13:06:06 -08:00
7afb091f26
APM_RC: APM2 fast output speed increased to 400hz.
2011-12-10 13:04:11 -08:00
5c99035823
fixed the desktop build
...
This fixes a vtable link bug
2011-12-05 18:06:58 +11:00
fd77fe5a9d
Rover live test WORKS! "Murphy's Law is a turtle"
2011-12-03 22:42:08 -05:00
02f25ac36d
libraries: rename purple to APM2
2011-11-25 20:00:19 -08:00
0ee654d6bf
desktop: fixed desktop build
...
vtable error
2011-11-25 20:00:18 -08:00
b8c44d2fc0
APM_RC: _set_speed functions implemented for APM_RC_APM1 and _Purple
...
* I have not tested any of these on real hardware.
2011-11-25 20:00:18 -08:00
ea4c220ee9
APM_RC: OCR register init moved from ArduCopter/radio.pde to lib inits.
2011-11-25 20:00:18 -08:00
36346fd86b
purple: rework APM_RC library for purple hardware
...
this splits the APM_RC class into instances for purple and APM1, and
adds example sketches for both
2011-11-25 20:00:16 -08:00
a621f5821f
APM_RC: Cosmetic changes to increase readability and some minor optimizations
2011-10-02 18:05:00 +02:00
0c7c508541
Optional recursion added.
2011-09-30 17:17:51 -04:00
5489b84f8e
Improvements to cmake.
2011-09-29 21:23:26 -04:00
d887a28b91
Added ArduBoat/ ArduRover/ and APO library.
2011-09-29 14:12:15 -04:00
227ce0a92d
Merge some small misc improvements from APM_Camera branch
2011-09-17 20:25:31 +02:00
a4e001bbcf
Adding CMake support
2011-09-14 15:44:55 +02:00
f08cea8044
These changes were meant to be inside commit a14c06adc06b. I'm sorry but reverting stuff is not that easy
2011-09-13 01:54:47 +02:00
5406991831
Added support for routing any function to any of the aux. servos.
...
This is a manual merge from the APM_Camera branch.
It reverts the stuff that Oliver did not menat to do with his commit 6dcbc7f44bc0
2011-09-13 01:24:06 +02:00
ce010b4e38
Moved update_aux_servo_function() to the RC_Channel_aux.* files.
...
This simplifies code sharing between ArduCopter and Arduplane at the expense of 48bytes.
Moved CH_x defines out of the defines.h file and into the library where they belong
2011-09-11 23:07:30 +02:00
6061ee4b81
HIL: fixed radio_status in setHIL() for APM_RC
...
thanks to Michael Oborne for noticing this!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2952 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-28 12:11:25 +00:00
47bc8a7500
removed some initial settings
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2565 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:35:11 +00:00
96cb7d2fc0
Add clearOverride message to allow failsafe recovery from joystick control
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2540 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-11 23:59:35 +00:00
f5700c75c8
Fix bug for GCS joystick control
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2440 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-30 03:44:07 +00:00
4bce9465a6
Change setHIL to return a bool based on if GCS joystick control is active
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2423 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 23:15:29 +00:00
c07f6fb25f
defaulted to 38400 baud
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1885 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-16 04:50:38 +00:00
c1b6032e7f
Eclipse makefile support for examples.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1860 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-09 19:38:12 +00:00
6ee6000302
Temp revert to previous version, while I hunt down a bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1822 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 23:34:50 +00:00
17c6acd310
reformatted
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1817 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 21:05:02 +00:00
8dbb0ed47b
Add member/method to allow HIL to override radio values
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1732 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-28 02:37:51 +00:00
5113a12144
Deal more gracefully with the case where the incoming PPM stream has more than 8 channels encoded.
...
This makes it possible to move one resistor on the APM board and feed it PPM directly from a receiver emitting a PPM stream.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1498 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-15 19:32:04 +00:00
5f15380877
cosmetic
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1370 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-30 06:43:35 +00:00
a257c51a09
Some changes to fix compile errors when using ATmega2560.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1187 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-19 13:05:02 +00:00
386dab70f9
re-uploaded
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@953 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 05:01:44 +00:00
66c553fc96
re-uploaded
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@952 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 05:01:29 +00:00
7a3683e104
outdated - replaced with better RC_Channel class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@947 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 04:42:51 +00:00
71076dad27
Switched APM_RC to uint16_t from int16_t for radio channels to fix servo bug in APM trunk.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@853 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-18 05:21:53 +00:00
0f53cc4c8e
Add a guard ifdef to catch folks trying to build APM with the wrong board selected.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@517 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-14 15:22:08 +00:00
69833ebcd5
accidentally deleted
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@283 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-08-23 21:45:16 +00:00
rmackay9
Andrew Tridgell
Jason Short
Pat Hickey
Wenyao Xie
Pat Hickey
John Arne Birkeland
James Goppert
Amilcar Lucas
unknown
tridge60@gmail.com
jasonshort
deweibel@gmail.com
james.goppert@gmail.com
DrZiplok
rmackay9@yahoo.com
james.goppert
DrZiplok@gmail.com