Commit Graph

703 Commits

Author SHA1 Message Date
Peter Barker 35d8f11e46 AP_Motors: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Jacob Walser 20889ff8a9 APMotors6DOF: Add motor reverse parameters for motors 9-12
Fix overruns found in coverity 145496-99
2017-07-11 09:34:40 +09:00
Andrew Tridgell abd0831239 AP_Motors: changed BRUSHED16kHz to BRUSHED 2017-06-17 17:37:45 +10:00
Leonard Hall 9e86732edc AP_Motors: accept external battery resistance estimate 2017-06-06 14:57:04 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 1b062d9d29 AP_Motors: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Jonathan Challinger 2e07f8824e AP_Motors: reserve parameter index 38 2017-06-06 08:45:37 +09:00
murata 66fc49889b AP_Motors: add dodeca-hexa 2017-05-27 14:21:13 +09:00
Randy Mackay d00725b2ed AP_Motors: rc_write handles motors 9 to 12 2017-05-27 14:21:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 9d9ebc91cd AP_Motors: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
murata 46cba2c970 libraries: Delete the setting value for specific editor. 2017-05-11 13:18:41 -07:00
murata 10c446f69d AP_Motors: Fit the indent column to the coding style. 2017-05-11 13:18:41 -07:00
Sriram Sami 379005ebc7 AP_Motors: Fix comment on expected variable range
the move_actuators function in AP_MotorsHeli_Dual previously
indicated incorrect ranges for its input variables.
2017-05-09 17:41:26 +09:00
Andrew Tridgell 46d9a1dcb5 AP_Motors: fixed tricopter tail servo in fwd flight
in quadplane forward flight the with tilt-tricopter tail servo needs to
be at its trim position. Thanks to Marco for noticing this.
2017-05-09 08:59:00 +09:00
Andrew Tridgell bdc4320fe8 AP_Motors: added MOT_BOOST_SCALE
this is to support boost motors for copters, such as having a petrol
motor for extra lift on a multicopter

The scaling factor allows the user to control how much of the lift is
generated from the booster and how much from the main multicopter
motors
2017-05-08 11:02:55 +10:00
Andrew Tridgell 1f847132d7 AP_Motors: setup limits flags for tailsitters 2017-05-07 09:10:44 +10:00
Andrew Tridgell 2c4975ba31 AP_Motors: removed cork/push from AP_Motors
should be done by vehicle code if needed, so that AUX servos are sent
at the same time
2017-05-01 14:32:18 +10:00
Andrew Tridgell 6f54eef857 AP_Motors: force roll motors to 0 in tailsitter when disarmed 2017-04-14 13:01:48 +10:00
Andrew Tridgell f571b34fd7 AP_Motors: setup RC speed for tailsitters 2017-04-11 17:34:40 +10:00
Andrew Tridgell 328541769d AP_Motors: allow control surfaces to move disarmed
allow tailsitter control surfaces to move in Q modes when shutdown
2017-04-11 17:34:40 +10:00
Sriram Sami 8bb052d019 AP_Motors: update descriptions for new parameters 2017-04-01 05:25:59 +11:00
Sriram Sami 1793bac8d4 AP_Motors: add parameters for HELI_DUAL
- add COL2_MIN/MID/MAX parameters that control limits of rear swashplate
- output collective_mid correctly for rear swashplate when servo is in manual mode
2017-04-01 05:25:59 +11:00
Andrew Tridgell 1ad5e1db4e AP_Motors: integrate AP_MotorsHeli_Dual
fixed issues with combining with Heli_Single
2017-03-25 16:22:10 +11:00
Fredrik Hedberg 998231ab0d AP_Motors: added AP_MotorsHeli_Dual
for tandem and transverse helis
2017-03-25 16:22:10 +11:00
Jacob Walser 507b461388 AP_Motors: Initialize throttle range directly
This was causing SITL to hang at boot when motors object is statically allocated.
2017-02-28 22:34:35 -08:00
Lucas De Marchi ade1876318 AP_Motors: tie esc scaling with set_throttle_range()
We need to update the esc scaling from inside the Motors library, that
has access to the MOT_PWM_[MIN|MAX] values. Otherwise even though the
AP_Motors library honors the value for calculations, the RCOutput
drivers that need the scaling to set the real HW scaling will not work.
Right now it scales the value using the throttle_channel's min/max, even
though AP_Motors may be passing values in other range.
2017-02-26 13:38:24 +11:00
Jacob Walser cde1452da3 AP_Motors: Use fabsf instead of fabs 2017-02-22 11:25:18 -08:00
Rustom Jehangir 237ba87ca4 AP_Motors: New AP_Motors6DOF used by Sub 2017-02-21 11:26:14 +11:00
Andrew Tridgell 83d055eceb AP_Motors: support twin-motor tailsitters
use differential thrust for roll
2017-02-18 17:26:43 +11:00
Andrew Tridgell ac2a9c4b4a AP_Motors: allow Copter to fly the tailsitter motors class 2017-02-18 17:26:43 +11:00
Andrew Tridgell 1a74b7fc0c AP_Motors: started on tailsitter support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 108cbe1dab AP_Motors: mark tricopter yaw as tricopter only 2017-02-14 19:50:01 +11:00
Andrew Tridgell 2187417d74 AP_Motors: added MOT_SPOOL_TIME
this allows for quadplanes to have faster spoolup, which can help with
transitions
2017-02-14 09:23:17 +09:00
Randy Mackay 8b5aae37e0 AP_Motors: remove Hexa-H, change Octa-H factors
Octa-H is like an Quad-X but with each side having two additional motors placed between the front an back motors.
Octa-H is quite different from Quad-H.
2017-02-10 10:42:14 +09:00
Randy Mackay 872e0567be AP_Motors: add H frame support for hexa and octa 2017-02-09 12:37:14 +09:00
Randy Mackay a14265359f Copter: reduce default MOT_THST_HOVER to 0.35 2017-02-07 11:20:25 +09:00
Andrew Tridgell af44e9fdbd AP_Motors: added frame type 11 for Y6 to match FireFly6
using same motor output mapping as AvA
2017-02-06 16:18:58 +11:00
murata 92eb179acf AP_Motors: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Andrew Tridgell a6ecb94d24 AP_Motors: MotorsTri does not need its own var_info now 2017-01-20 12:05:09 +11:00
Andrew Tridgell 8e3bf71aa9 AP_Motors: allow single, tri and coax to be part of multicopter class 2017-01-12 17:39:37 +11:00
Andrew Tridgell 8799094278 AP_Motors: use SRV_Channel for tri tail servo 2017-01-12 17:39:37 +11:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00
Randy Mackay bdfb12123f AP_Motors: fix frame-type enum for Y6B
Also remove unused NEW_PLUS
2016-12-31 10:55:23 +09:00
Randy Mackay 037e411e35 AP_Motors: fix example sketch
Also minor formatting fix
Thanks to OXINARF for spotting this
2016-12-31 10:55:23 +09:00
Randy Mackay ffa6d1a5b9 AP_Motors: init fixes for frame_class, type and initialised_ok
Thanks to OXINARF for spotting these
2016-12-31 10:55:23 +09:00
Randy Mackay a276f5dc90 AP_Motors: fix example sketch 2016-12-31 10:55:23 +09:00
Randy Mackay 7be0f437a9 AP_Motors: consolidate matrix multicopters
AP_MOTORS_x_FRAME definitions moved to motor_frame_type enum
init function and now accepts frame-class and type to perform initial motor setup
set_frame_class_and_type allows real-time changing of motor setup
initialised_ok flag and accessor records whether setup was successful
2016-12-31 10:55:23 +09:00
Randy Mackay 41189758b8 AP_Motors: move some functions to protected
Also minor formatting fix
2016-12-31 10:55:23 +09:00
priseborough 509709ce9d AP_Motors: remove unused EKF1 include 2016-12-19 08:07:11 +11:00
Randy Mackay 2da7ea746b MotorsHeli: minor formatting updates 2016-12-14 13:21:59 +09:00
Leonard Hall a09d4db4fd AP_MotorsMulticopter: fix battery resistance calculation 2016-12-14 11:07:29 +09:00