Andrew Tridgell
f4023d1b44
AP_Airspeed: remove airspeed filter and run at 10Hz
...
this saves on the filter memory, and gives just as good a result
2012-08-15 12:39:35 +10:00
Andrew Tridgell
a361a3aebd
AP_AnalogSource: make read_average() return a float
...
this allows it to take advantage of better than 1 bit resolution by
averaging
2012-08-15 12:39:35 +10:00
Andrew Tridgell
7bb8fa1e58
MAVLink: added FENCE_ACTION_REPORT
2012-08-15 12:39:35 +10:00
Andrew Tridgell
44852276da
AHRS: added ahrs.yaw_initialised()
...
this allows the high level code to know if the AHRS driver has a
reliable yaw estimate
2012-08-15 12:39:34 +10:00
Andrew Tridgell
93f45f232f
APM: added 'OBC' failsafe module for ArduPlane
...
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.
This includes:
- manual pin
- heartbeat pin
- waypoint for heartbeat failure
- waypoint for GPS failure
2012-08-15 12:39:34 +10:00
Pat Hickey
394a3059b7
APM_RC_APM2: updated comments for clarity
2012-08-13 15:34:17 -07:00
rmackay9
4e7e78d091
AP_RC_Channel: deleted this library as nobody seems to be using it.
...
Everyone is using RC_Channel instead which includes parameters.
2012-08-13 16:36:10 +09:00
rmackay9
c22f3ae563
GPS_IMU: deleted this empty library as nobody seems to be using it.
2012-08-13 16:35:29 +09:00
rmackay9
cb71edb427
Waypoints: deleted this library as nobody seems to be using it.
2012-08-13 16:35:08 +09:00
rmackay9
8f475f9d38
Trig_LUT: deleted this library as nobody seems to be using it
2012-08-13 16:34:50 +09:00
rmackay9
1115dde0d4
AP_EEPROMB: deleted this library as nobody seems to be using it.
2012-08-13 16:34:33 +09:00
rmackay9
a3a56c488a
APM_RC: rename example sketch directories for APM2 so they can be opened easily from arduino ide
2012-08-13 11:50:53 +09:00
Andrew Tridgell
562069cbd7
AHRS: avoid a compiler bug in quaternion code
...
Having _wind in the AP_AHRS class causes a register allocation error
when building the Quaternion code with some versions of avr-gcc. Quite
bizarre.
2012-08-13 11:08:10 +10:00
Andrew Tridgell
fa1b72adc5
AHRS: use airspeed for wind in forward flight
...
when not turning we can use the airspeed sensor directly to calculate
the wind speed.
2012-08-12 10:54:25 +10:00
Andrew Tridgell
3a92509b18
AHRS: added AHRS_GPS_USE parameter
...
this allows for the GPS to be disables for position updates, which
allows for testing dead-reckoning
2012-08-11 22:06:03 +10:00
Andrew Tridgell
8ddf864431
Mavlink: re-generate with WIND message
2012-08-11 22:06:03 +10:00
Andrew Tridgell
f8a17ba1e9
Mavlink: added WIND message
...
this allows us to log the wind estimation result
2012-08-11 22:06:03 +10:00
Andrew Tridgell
2c7ab7c659
AHRS: added wind estimation code
...
this allows us to estimate the wind while we have GPS lock, then use
that estimate in the long term dead reckoning
2012-08-11 22:06:03 +10:00
Andrew Tridgell
20a30e3a6b
AP_Math: added matrix column extraction functions
2012-08-11 22:06:02 +10:00
Amilcar Lucas
f103d375c9
RC_Channel_aux: cycle thru all functions except k_none and k_nr_aux_servo_functions
...
Probably makes no difference because g_rc_function[k_none] == NULL
2012-08-11 13:43:21 +02:00
Andrew Tridgell
708280511c
AHRS: added long-term dead-reckoning
...
this uses airspeed (if available) or last GPS ground speed to update
our position estimate in AHRS
2012-08-11 12:00:31 +10:00
Andrew Tridgell
06070dbf23
AP_GPS: added last_ground_speed() method
...
used for dead-reckoning in AHRS
2012-08-11 11:59:47 +10:00
Andrew Tridgell
f68211a011
AP_GPS: fixed types to be stdint types
2012-08-11 11:59:03 +10:00
Andrew Tridgell
96d1249dad
SITL: fill in SIMSTATE.lat and SIMSTATE.lng
2012-08-11 11:58:25 +10:00
Andrew Tridgell
90f00ebd01
MAVLink: re-generate MAVLink C code
2012-08-11 11:58:06 +10:00
Andrew Tridgell
b47cceb442
MAVLink: added SIMSTATE.lat and SIMSTATE.lng
...
this allows us to display both true and estimated position on the
groundstation
2012-08-11 11:57:45 +10:00
Andrew Tridgell
e1ffd37411
AP_Math: added location_update() and location_offset() functions
...
these will be used by AHRS dead reckoning
2012-08-11 11:56:54 +10:00
Andrew Tridgell
e48b0f8558
AHRS: make airspeed sensor available to AHRS
...
this will be used for long term dead-reckoning
2012-08-11 08:57:32 +10:00
Andrew Tridgell
d3cc6e5fab
ACM: fixed HIL build
2012-08-11 08:34:16 +10:00
Jason Short
d37ca9343b
MOTORS Mixer: temp removal of Yaw Contrib code
2012-08-09 17:00:11 -07:00
Jason Short
4e001286a6
AHRS DCM: FOrmatting
2012-08-09 16:59:43 -07:00
Amilcar Lucas
aef8c7af0a
AP_Mount: Reduce parameter name length, to allow MNT2_* strings to be smaller than the limit of 15 characters
2012-08-10 00:16:52 +02:00
Andrew Tridgell
a2f802e5da
build: fixed more build warnings
2012-08-09 16:19:39 +10:00
Andrew Tridgell
0491188c03
MPU6000: fixed some build warnings
2012-08-09 16:19:21 +10:00
Andrew Tridgell
c69dccceb2
AP_MetaClass: fixed a warning
2012-08-09 16:19:04 +10:00
Andrew Tridgell
73d70354a3
AP_Param: fixed some build warnings
2012-08-09 16:18:53 +10:00
Andrew Tridgell
d3c399c5d9
MAVLink: removed obsolete files
2012-08-09 15:25:49 +10:00
Andrew Tridgell
52b6e4ab2e
MAVLink: added generator.sh script
...
this is used to re-generate our MAVLink C code
2012-08-09 15:25:06 +10:00
Andrew Tridgell
a7399c405d
MAVLink: removed the need for Mavlink_compat.h
...
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
Andrew Tridgell
16d63978f1
MAVLink: moved mavlink variables back to library
...
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Amilcar Lucas
1683f18bff
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
Amilcar Lucas
45b10a51ff
AP_Mount: Enable Joystick speed code, now that the framework supports more than 16 parameters per group.
...
Save some bytes by skiping the redundant *_rc_in initialization in the AP_Mount() constructor
2012-08-08 22:45:36 +02:00
Andrew Tridgell
eeaa855b03
SITL: fixed deletion of eeprom.bin
...
with the new AP_Param constructor order, we need to erase rather than
unlink the eeprom
2012-08-08 18:01:06 +10:00
Andrew Tridgell
5e19c0cf04
AP_Airspeed: removed values passed to constructor
2012-08-08 16:38:39 +10:00
Andrew Tridgell
fc26d49260
AP_Param: avoid saving values within 0.01% of the default value
...
this saves some more space due to rounding errors
2012-08-08 13:13:30 +10:00
Andrew Tridgell
3159c9ed99
AP_Mount: fixed defaults for angles
...
this saves some eeprom space by not saving the 4500 values
2012-08-08 13:04:49 +10:00
Andrew Tridgell
891ed81f74
AP_Math: rename get_bearing() to get_bearing_cd() to make units obvious
2012-08-08 12:12:30 +10:00
Andrew Tridgell
6245592447
SITL: added pgm_read_dword() and pgm_read_float()
2012-08-08 12:11:57 +10:00
Andrew Tridgell
e9d0ae3e7f
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
7be604cffd
AP_Param: update AHRS for new constructor syntax
2012-08-08 12:11:57 +10:00