Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
6,488 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

181 Commits

Author SHA1 Message Date
Andrew Tridgell 7b50724f60 MAVLink: allow for find grained stream rate control 
streams can now be requested at any multiple of 20ms. So if you ask
for a stream at 7Hz then you will get it at close to 7Hz.
 2012-04-02 11:18:53 +10:00
Andrew Tridgell 86cc7a5e1d APM: enable AP_Declination by default 2012-03-30 14:25:27 +11:00
Andrew Tridgell 9d193f06c9 APM: Change version to 2.32 2012-03-29 12:50:12 +11:00
Andrew Tridgell 1c934dc7ef APM: increase ArduPlane version to 2.31 2012-03-27 16:13:29 +11:00
Andrew Tridgell 989304fb47 APM: enable the new offset nulling in APM 2012-03-27 15:37:24 +11:00
Andrew Tridgell 8afd196907 APM: adapt ArduPlane for AHRS framework 2012-03-19 17:29:02 +11:00
Michael Oborne 3944c1e665 update AP version to 2.30 2012-03-18 10:27:49 +08:00
Andrew Tridgell 2a03a0584f AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED 
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
 2012-03-11 21:46:41 +11:00
Adam M Rivera d3667faef4 AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Andrew Tridgell 371677610d APM: avoid fetching the DCM matrix twice 
also no special case for quaternions
 2012-03-10 10:34:32 +11:00
Andrew Tridgell e39c3cb9d2 APM: make it possible to build ArduPlane with quaternion support 2012-03-10 10:34:29 +11:00
rmackay9 02cf07bb6b ArduPlane - updated to use new filter library 2012-02-28 21:03:04 +09:00
rmackay9 e1114bf7f7 ArduPlane - added Filter.h to unbreak the build! 2012-02-26 17:05:56 +09:00
rmackay9 21d7a77009 ArduPlane - switch sonar to use new mode filter from filter library 2012-02-26 15:35:42 +09:00
Andrew Tridgell 0248b48d30 allow MAG_ENABLE to be changed in flight 
this disables the compass in DCM if MAG_ENABLE is changed in
flight. Without this we would use a fixed yaw once the compass is
disabled

This also makes sure we don't pass the compass to DCM till we have
done a read. This ensures we have a good compass fix for the initial
DCM heading
 2012-02-25 14:51:09 +11:00
Andrew Tridgell 330ff5dc8b APM: added some comments related to hold_course 
hold_course is either -1 (for disabled) or a course to hold for
takeoff/landing. This makes the code a bit clearer.

It also resets hold_course in all non-auto modes, to ensure it isn't
used
 2012-02-15 08:50:45 +11:00
Andrew Tridgell bc0ed62aa9 adapt mainline APM code to AP_Param 2012-02-13 16:22:51 +11:00
Michael Oborne 9ca6668c1b fix SITL attitude hil 2012-01-20 16:04:49 +08:00
analoguedevices 418f5ea31e Increment version number in anticipation of a firmware hex push. 2012-01-16 22:48:46 +00:00
Doug Weibel 797e0e27a9 Additional commenting on global variables 
First pass done.
 2012-01-16 10:28:03 -07:00
Doug Weibel b4e58b50ee Additional commenting on global variables 2012-01-16 09:45:42 -07:00
Doug Weibel 0306bf97a0 Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Doug Weibel 892f24ac5c Adding comments for global variables 2012-01-11 12:37:43 -07:00
Doug Weibel 4de2155845 Tweak to FBW min altitude 
Patch from Yury
 2011-12-31 15:44:40 -07:00
Andrew Tridgell cd3729d993 APM: added error checking on barometer read 
if the barometer is dead and the GPS has a fix, use the GPS for
altitude
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 98353b7ba8 APM: added error checking on compass read 2011-12-28 20:41:53 +11:00
Andrew Tridgell 3cb96fb8af APM: convert to new I2C library 2011-12-28 20:41:53 +11:00
analoguedevices b8917b58bd Added contributor names, removed "alpha" from firmware name 2011-12-26 17:13:37 +00:00
Andrew Tridgell e687ce9b3d mainloop_count should be uint16_t 2011-12-21 23:31:38 +11:00
Andrew Tridgell 89561d49d0 always declare a timer_scheduler 
we should always run this code
 2011-12-21 23:31:38 +11:00
Andrew Tridgell df094ce463 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Andrew Tridgell fc495ce6a7 geofence: added fence status reporting and faster altitude check 2011-12-16 20:11:51 +11:00
Andrew Tridgell 3b148c87d5 geofence: main geo-fence code 
this implements the primary logic of geo-fencing
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 960d6ee38a removed an unused variable 2011-12-16 20:09:49 +11:00
Andrew Tridgell 888d6226b2 fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Andrew Tridgell 78e8fbff9c fixed hardware config check for barometer 2011-12-12 15:14:55 +11:00
Andrew Tridgell 011110e1dd airspeed: use floating point values and better averaging in zero_airspeed() 
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
 2011-12-12 15:14:55 +11:00
Pat Hickey a99a1dbc9a ArduPlane: update AP_Baro construtors and initializers 2011-12-11 15:21:10 -08:00
Pat Hickey 04ea979331 ArduPlane: Rename APM_BMP085 classes to AP_Baro_BMP085 classes 2011-12-11 15:21:09 -08:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio! 
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
 2011-12-09 16:43:25 -07:00
Pat Hickey ab56a764d3 ArduPlane: rev version number from 2.26 to 2.27 Alpha 2011-11-25 20:00:19 -08:00
Andrew Tridgell 86927ac0a5 ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell ffba37d599 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1c20efe4b8 re-organiser sensor declarations 
this tries to make the #ifdef nesting easier to understand
 2011-11-25 20:00:17 -08:00
Andrew Tridgell 03c7d7bfb6 purple: always declare timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey 9e47536924 purple: declare sensors for purple library rework 
we need some different declarations to match the new APIs
 2011-11-25 20:00:17 -08:00
analoguedevices b3716d988f Rev version number 2011-11-19 23:43:47 +00:00
Doug Weibel f752c4b799 Change to logging file system. 
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
 2011-11-17 21:25:51 -07:00
analoguedevices 7535b8a3d5 Rev version number 2011-11-16 05:04:36 +00:00
analoguedevices e3ef9a2a36 Rev version number to 2.25 2011-11-14 05:31:27 +00:00
Amilcar Lucas ab730ff919 Added camera and/or antenna mount support. 
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
 2011-10-31 22:55:58 +01:00
Andrew Tridgell 0211fc2f09 move g_rc_function[] to RC_Channel library 
libraries should not rely on data declared in the main program. This
caused a build error for the Desktop build for ArduCopter under cygwin
 2011-10-29 18:42:18 +11:00
Doug Weibel 645b9c1d48 Initial rewrite of command logic. 
Changes mission structure so that conditional and immediate commands are located between associated waypoints instead of after the second waypoint.
 2011-10-27 13:45:52 -06:00
Doug Weibel 9cbc38b516 Add a feature for a minimum altitude parameter while flying in FBW-B 
This patch written by YureZzZ - Thank you!
 2011-10-16 23:11:40 -06:00
Michael Oborne 7ef51f723d Sensor hil fix's 2011-10-13 22:22:03 +08:00
Andrew Tridgell 546b4df76d avoid the need for compiler optimisation for HIL build 
read_airspeed() is only available when in a non-HIL build. The
optimiser normally removes this call, but when debugging in a desktop
build, it is nice to avoid using the optimiser
 2011-10-09 22:08:58 +11:00
Amilcar Lucas 7b4ccffa53 Moved relay control functions to it's own library 2011-10-02 01:00:27 +02:00
Amilcar Lucas dcef0f34e9 Correct/update channel assigment comment 2011-10-02 00:06:44 +02:00
Doug Weibel 5073acce3e Add auto flap functionality to FBW-B 2011-09-30 07:25:36 -06:00
Andrew Tridgell 6a9a85f184 remove unused climb_rate code 2011-09-19 11:04:02 +10:00
Andrew Tridgell e61d742345 GCS: make the two GCS links gcs0 and gcs3 
the artifical separation between 'gcs' and 'hil' just leads to
confusion. This also simplifies the code a bit more, and saves us a
bit more text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 2ca8e58bc2 GCS: simplify the API for sending messages 
this makes the code clearer, and saves us another 100 bytes of text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 220b941e31 removed some more dead messages, and convert MSG_* to an enum 
this make it safer to add a new message while keeping deferred queue
the right size
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 9baab490f1 HIL: first step in simplifying the HIL/GCS code 
this gets rid of the messy #ifdefs around HIL_PORT, and removes
non-MAVLink GCS and HIL support
 2011-09-19 11:04:01 +10:00
Andrew Tridgell 58fa51b680 ArduPilot updates for new DCM code 
G_Dt is no longer needed, and scale ADC values by 8 to match old
constants
 2011-09-17 14:58:02 +10:00
Amilcar Lucas f08cea8044 These changes were meant to be inside commit a14c06adc06b. I'm sorry but reverting stuff is not that easy 2011-09-13 01:54:47 +02:00
Amilcar Lucas 5406991831 Added support for routing any function to any of the aux. servos. 
This is a manual merge from the APM_Camera branch.
It reverts the stuff that Oliver did not menat to do with his commit 6dcbc7f44bc0
 2011-09-13 01:24:06 +02:00
Amilcar Lucas c7b3bfd295 Use the G_RC_AUX macro when possible. Added more comments. Remove unused code 2011-09-12 20:21:12 +02:00
Amilcar Lucas 46f9d4cec8 This is ugly, but it fixes compilation on arduino 2011-09-11 23:25:06 +02:00
Amilcar Lucas ce010b4e38 Moved update_aux_servo_function() to the RC_Channel_aux.* files. 
This simplifies code sharing between ArduCopter and Arduplane at the expense of 48bytes.
Moved CH_x defines out of the defines.h file and into the library where they belong
 2011-09-11 23:07:30 +02:00
Amilcar Lucas 213969202a Moved the RC_Channel_aux class to its own file. The includes could be improved, has anyone got any ideas how ? 2011-09-11 19:13:01 +02:00
Amilcar Lucas 2fa92aea4c Fix RC range reversal 2011-09-11 04:12:04 +02:00
Amilcar Lucas 46185ee5d8 Revert "Fix RC range reversal" 
This reverts commit d5046b1097b0b5455aa1a59e9dd80533e589432e.
 2011-09-11 04:07:36 +02:00
Amilcar Lucas 51a8ec0ba8 Fix RC range reversal 2011-09-11 04:04:02 +02:00
Amilcar Lucas 8aeee578b4 For now point the camera manually via the RC inputs 2011-09-11 02:40:13 +02:00
Amilcar Lucas 59cbb8ec6f Moved a camera mount function call, out of the servos update function 2011-09-10 13:47:09 +02:00
Amilcar Lucas b7a0d8836a This is the real HEAD of the APM_Camera branch. Seams that lots of changes got lost in the SVN to GIT port 2011-09-09 16:18:38 +02:00
Andrew Tridgell ec398505a6 rename main pde file for arduino requirements 2011-09-09 11:52:25 +10:00