Iampete1
d473344177
Plane: add video stab log bit and log in ahrs_update
2022-01-05 19:56:03 +11:00
Iampete1
ca1b5b1db2
Plane: Quadplane: use get_frame_and_type_string
2022-01-05 19:51:19 +11:00
Peter Barker
89e3e27d3d
ArduPlane: move INS notch filter logging into INS
2022-01-05 16:34:36 +11:00
Peter Barker
173f36c145
ArduPlane: make vehicles write notch log messages
2022-01-05 16:34:36 +11:00
Peter Hall
d4eb2c6396
Plane: quadplane: QPOS_POSITION1 tailsitters use input_vel_accel method
2022-01-04 10:42:12 +11:00
Iampete1
4848ac9166
Plane: quadplane: don't use is_active_z(), becasue its wrong
2022-01-04 10:42:12 +11:00
Iampete1
fb1f6b57ad
Plane: Quadplane: never run Z controller if motors are not throttle unlimited
2022-01-04 10:42:12 +11:00
Peter Hall
c215fa0745
Plane: Quadplane: never run Z controller in tailsiter VTOL transtion
2022-01-04 10:42:12 +11:00
Peter Hall
9df753551e
Plane: quadplane: tailsitter: always relax pitch after transtion
2022-01-04 10:42:12 +11:00
Peter Hall
d054ca0426
Plane: quadplane: limit post VTOL transtion pitch rate on tailsitters in maunal modes
2022-01-04 10:42:12 +11:00
Peter Hall
67d7ba490f
Plane: quadplane: pass time to tailsitter.in_vtol_transition where avalable
2022-01-04 10:42:12 +11:00
Iampete1
9634641323
Plane: tailsitter: rate limit pitch up in VTOL pos control flight.
2022-01-04 10:42:12 +11:00
Andrew Tridgell
2691022e12
Plane: update release notes for 4.1.6
2022-01-03 13:11:18 +11:00
Andrew Tridgell
2251293ec7
Plane: fix stabilize mode
...
should self-level. Broken by #19171
2022-01-03 08:09:53 +11:00
Iampete1
abe9e4425b
Plane: quadplane: remvoe unused loiter initial pitch varable
2021-12-31 08:46:31 +11:00
Andrew Tridgell
fb019eb0f3
Plane: add a low pass filter to speed scaler
...
this is needed due to the filtering done on the target rate in
AC_PID. With a low filter rate in AC_PID a step in the speed scaler
results in a step in the FF output due to the mismatch in the
instantaneous SS and the filtered target rate
2021-12-29 18:36:05 +11:00
Peter Barker
e55eea961f
ArduPlane: create and use AP_OPTICALFLOW_ENABLED
2021-12-29 18:12:03 +11:00
Andrew Tridgell
336b666f83
Plane: fixed stick mixing and throttle nudge in QRTL approach
...
thanks to Henry for noticing this
2021-12-28 16:04:12 +11:00
Peter Barker
d7fae5263f
ArduPlane: adjust for rename of OpticalFlow.cpp
2021-12-28 10:16:20 +11:00
Samuel Tabor
a715472353
Plane: Specify starting location to set_offset_altitude_location
2021-12-27 11:27:52 +11:00
Hwurzburg
18e427d27d
Plane: add Q_OPTION to force fw trans on fail instead of QLAND
2021-12-24 13:55:15 +11:00
Iampete1
2154738421
Plane: Quadplane: only advance to QPOS_POSITION2 once tilts have finished slewing
2021-12-22 18:46:14 +11:00
Iampete1
eac52fe08f
Plane: quadplane: don't ouput VTOL throttle on tiltrotor with no VTOL motors and till fully forward
2021-12-22 18:46:14 +11:00
Iampete1
6116eaeb32
Plane: quadplane: enhance tiltrotor transtion to better deal with tiltrotors with all motors tilting
2021-12-22 18:46:14 +11:00
Andy Piper
aefc97fafa
Plane: use calculated number of notches for dynamic harmonic
2021-12-22 18:13:38 +11:00
Andrew Tridgell
db0f06fb58
Plane: update release notes for 4.1.6beta1
2021-12-21 13:21:50 +11:00
Peter Barker
278899e44c
ArduPlane: tidy log message id definitions
...
Add a comment indicating only 20 ids are available to the vehicle
2021-12-21 10:42:18 +11:00
Jaaaky
50430d9fc8
ArduPlane: Fix multi #include's
2021-12-21 10:38:46 +11:00
Iampete1
055d90d49b
Plane: tailsitter: add gains to scale control surface vs motors
2021-12-21 10:14:34 +11:00
Gone4Dirt
d244a0b803
Plane: Make RPM log independant of RC log mask
2021-12-16 12:48:48 +11:00
Samuel Tabor
c44fed34d4
AP_Soaring: Override airspeed and flap angle.
2021-12-16 07:12:24 +11:00
Peter Barker
08a8b3f155
Plane: use @CopyValuesFrom for FLTMODEn parameters
2021-12-16 07:11:33 +11:00
Iampete1
8aa4a802f3
Plane: tiltrottor: add missing ff terms
2021-12-14 10:14:28 +09:00
Andrew Tridgell
c746efff4f
Plane: updated release notes for 4.1.5
2021-12-13 10:55:44 +11:00
Hwurzburg
049f5f2135
Plane: fix divide by zero in transition time
2021-12-10 19:10:51 -08:00
Andrew Tridgell
1c89b7f3a2
Plane: check for VTOL takeoff in AUTO
...
if the "only arm in Q modes" bit is set in Q_OPTIONS then check that
in AUTO mode we are in a VTOL takeoff WP
2021-12-07 12:51:18 +11:00
Hwurzburg
274111a5ea
ArduPlane: clean up short failsafe
2021-12-07 10:09:33 +11:00
Andrew Tridgell
522056d6f7
Plane: release notes for 4.1.5beta1
2021-12-04 18:06:38 +11:00
Andrew Tridgell
ca13503f41
ArduPlane: revert compass parameter changes
2021-12-04 16:51:53 +11:00
Andrew Tridgell
e7c7cdd653
Plane: reset VTOL takeoff if not armed
...
we need to reset the takeoff target position while disarmed so we
don't use spurious position information from before we get good GPS
lock.
also remove the "Resetting previous waypoint" message as it doesn't
provide useful information and is just a distraction (it would be
printed continuously while waiting for arming with this PR)
2021-12-04 16:51:02 +11:00
Andrew Tridgell
e342ce0da4
Plane: fixed reset of steering locked course
...
reset when we have not been steering for 1s, to ensure that an old
locked course is not used
2021-12-04 07:41:35 +11:00
Andrew Tridgell
5f52171776
Plane: added QRTL as RCn_OPTION
2021-12-02 08:29:07 +11:00
Andrew Tridgell
de4a4a775a
Plane: fixed use before init bug in VTOL land
...
found by Peter Barker with valgrind
2021-12-01 19:42:42 +11:00
Andrew Tridgell
56870ad7d6
Plane: use yaw rate controller in NAV_SCRIPT_TIME
2021-11-30 16:19:26 +11:00
Andrew Tridgell
55d8afa1dd
Plane: support autotune for yaw rate control
2021-11-30 16:19:26 +11:00
Andrew Tridgell
b619ee4970
Plane: added support for rate yaw control
...
to enable for ACRO mode, set ACRO_YAW_RATE to desired maximum rate in
degrees/second, and set YAW_RATE_ENABLE=1 to enable PID tuning of yaw
rate controller
pair programmed with Andy Palmer and Matthew Hampsey
2021-11-30 16:19:26 +11:00
Iampete1
06c9a69975
Plane: remove compass params underscore
2021-11-30 08:14:43 +09:00
Josh Henderson
52adda7c4c
Plane: INAV rename for neu & cm/cms
2021-11-30 10:08:07 +11:00
Josh Henderson
c6dd39773d
ArduPlane: inav use _xy()
2021-11-30 10:08:07 +11:00
Andrew Tridgell
1af384ad12
Plane: updated release notes for 4.1.4
2021-11-25 09:05:29 +11:00
