Eugene Shamaev
afce24e45d
SRV_Channels: integration of UAVCAN Servos and ESCs
2018-05-25 13:53:17 +10:00
Andrew Tridgell
d54d3351de
SRV_Channel: check for rcout serial for blheli support
2018-04-07 09:10:29 +10:00
Andrew Tridgell
0018e1f944
SRV_Channel: added set_disabled_channel_mask()
...
used by AP_BLHeli
2018-04-07 09:10:29 +10:00
Andrew Tridgell
1be41b83fc
SRV_Channel: added SERVO_BLHI_ parameters
2018-04-07 09:10:29 +10:00
ChristopherOlson
c39a802655
SRV_Channel:Servo Library - set allowable min value to 500 pwm uS
...
Mostly for helicopter and airplane that may be using 760uS centered servos
2018-03-24 09:52:28 +09:00
Andrew Tridgell
c0c4021605
SRV_Channels: fix for replay
2018-01-15 11:46:02 +11:00
Andrew Tridgell
1c503ee459
SRV_Channel: removed create() method for objects
...
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Andrew Tridgell
051f30990c
SRV_channel: fixed doc names of VOLZ and SBUS
...
thanks to Mark for noticing
2017-12-09 08:08:00 +11:00
Mark Whitehorn
cca251c135
SRV_Channel: support SBusOut
2017-11-30 10:20:04 +11:00
Guy Tzoler
7f68be9bdf
SRV_Channel: adding Volz Support
2017-11-21 14:10:54 +11:00
Randy Mackay
07e2853b8e
SRV_Channel: function definition for winch
2017-10-27 09:20:38 +09:00
Andrew Tridgell
381e2fd69a
SRV_Channel: added get_motor_function()
...
for correct handling of motors 8 and above
2017-10-25 11:39:11 +11:00
Andrew Tridgell
0682d30ebd
SRV_Channel: ensure channel_mask is setup
2017-10-22 15:52:50 +11:00
Andrew Tridgell
39fd25bb36
SRV_Channel: added get_output_channel_mask()
...
will be used by AP_Motors
2017-10-22 15:52:50 +11:00
Andrew Tridgell
ed272833c3
SRV_Channel: don't treat k_motorN specially
2017-10-22 15:52:50 +11:00
Andrew Tridgell
99f5229a34
SRV_Channel: added copy_radio_in_out_mask()
2017-08-01 08:25:32 +10:00
Andrew Tridgell
1f1b4241c3
SRV_Channel: added get/set for reversed and function
...
these are needed in plane for auto-conversion of old elevon code
2017-08-01 08:25:32 +10:00
Andrew Tridgell
75999dbb39
SRV_Channel: prevent negative slew rate
...
thanks to Michael for pointing this out
2017-08-01 08:25:32 +10:00
Randy Mackay
9123b6034e
SRV_Channel: update_aux_servo_function first checks function is valid
...
This resolves a bug in which the board could become unresponsive if an invalid function is selected
2017-07-27 11:09:57 +09:00
Randy Mackay
572df8b859
SRV_Channel: minor formatting fixes
...
no functional change
2017-07-26 13:28:07 +09:00
Randy Mackay
298eaaeb3e
SRV_Channels: rename SERVO_DEF_RATE to SERVO_RATE
2017-07-26 13:28:07 +09:00
Andrew Tridgell
4ca3546551
SRV_Channel: added SERVO_DEF_RATE parameter
...
this allows for the default rate of servo outputs to be set. This is
needed for some planes where 50Hz isn't enough (eg. tailsitters)
2017-07-24 14:07:28 +10:00
Eugene Shamaev
ec8aa2e23f
SRV_Channel: move of CAN bitmasks into AP_UAVCAN
2017-07-03 11:44:32 +01:00
Andrew Tridgell
1d41dc034d
SRV_Channel: deprecate aileron_with_input and elevator_with_input
2017-07-03 11:17:42 +10:00
Andrew Tridgell
cde4afd28e
SRV_Channel: added set_trim_to_servo_out_for()
...
this will be used for new TRIM_AUTO functionality in plane
2017-07-03 11:17:42 +10:00
Andrew Tridgell
9cb672e85e
SRV_Channel: added doc values for dspoilers
...
and fix missing Motor9 to Motor12 values
2017-07-03 11:17:42 +10:00
Andrew Tridgell
7627246ff8
SRV_Channels: added 4 channel dspoiler support
2017-07-03 11:17:42 +10:00
Andrew Tridgell
6b3bb29398
SRV_Channel: rename flaperon1 and flaperon2 to flaperon_left and flaperon_right
...
this makes it more consistent with elevons and vtails
2017-07-03 11:17:42 +10:00
Andrew Tridgell
bc8c13d053
SRV_Channel: cope with large time jumps in slew rate limiter
2017-06-20 20:53:44 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
65cca6ae87
SRV_Channel: Improve the PWM parameters descriptions
2017-06-06 11:06:26 +10:00
Randy Mackay
544d6aa8a0
SRV_Channel: define aux functions for motors 9 to 12
2017-05-27 14:21:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
5e938c8cc0
SRV_Channel: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Andrew Tridgell
2168222d4b
SRV_Channel: added throttle_boot output function
2017-05-08 11:02:55 +10:00
Pierre Kancir
67e79a30e8
SRV_Channel: limit pwm_from_angle return to +/-high_out
2017-05-04 21:12:15 +10:00
Andrew Tridgell
84114d067a
SRV_Channels: added SRV_Channels::enable_by_mask()
2017-05-01 14:32:18 +10:00
Andrew Tridgell
61fbaf0db7
SRV_Channel: added elevon and vtail functions
...
these allow for trimming and limit setting per channel, plus allow for
more than one set of elevon or vtail
2017-04-24 16:26:08 +10:00
Andrew Tridgell
ce87bb7e39
SRV_Channel: added set_output_pwm_chan()
2017-04-18 08:41:24 +10:00
Andrew Tridgell
1db3b31686
SRV_Channel: added set_rc_frequency
...
this allows for setting RC output rate of named channel types
2017-04-11 17:34:40 +10:00
Andrew Tridgell
37301f67a0
SRV_Channel: added left and right motor tilt controls
2017-04-11 17:34:40 +10:00
Eugene Shamaev
c43d91b92e
SRV_Channel: support for servo and ESC commands to be send via UAVCAN
2017-04-10 22:38:12 +01:00
Andrew Tridgell
2d603c1cba
SRV_Channel: fixed reversing on servo gimbals
2017-03-23 11:02:07 +09:00
Pierre Kancir
bd4880b231
SRV_Channel: correct typo
2017-03-16 19:35:58 +00:00
Randy Mackay
36bcabb4e4
SRV_Channel: add constraint to move_servo
2017-02-28 19:29:00 +11:00
Andrew Tridgell
adf215998f
SRV_Channel: added MotorTilt to docs for SERVOn_FUNCTION
2017-02-28 08:10:56 +11:00
Andrew Tridgell
29b06d2d4a
SRV_Channel: fixed output slew rate handling
...
this fixes a bug that happens when the RC output speed is much lower
than the main loop speed, such as with forward throttle for
quadplanes. We need to base the slew on the last sent output, not the
last value read back (at 50Hz) from the IO board, or we will slew the
channel at 6x to 8x slower than the correct rate.
2017-02-21 06:09:33 +11:00
Andrew Tridgell
584fbf629b
SRV_Channel: added k_throttleLeft and k_throttleRight
...
support for differential thrust for yaw in twin engine planes
2017-02-18 17:26:43 +11:00
Andrew Tridgell
395702ceff
SRV_Channel: make SRV_AUTO_TRIM plane specific
2017-02-14 19:50:01 +11:00
Andrew Tridgell
f1bce549ef
SRV_Channel: improved doc string
2017-02-07 16:33:12 +11:00
Andrew Tridgell
325e24a378
SRV_Channel: split SRV_Channels.cpp out to separate cpp file
...
this is needed for automatic parameter documentation generation
2017-02-06 15:12:32 +11:00
Andrew Tridgell
77950301ed
SRV_Channel: fixed set_default_function()
2017-01-23 10:35:26 +11:00
Andrew Tridgell
e248078401
SRV_Channel: added AP_Motors servo channel parameter upgrading
2017-01-12 17:39:37 +11:00
Andrew Tridgell
86e0b8a91f
SRV_Channel: added automatic parameter upgrade
2017-01-12 17:39:37 +11:00
Andrew Tridgell
26f9a5569f
SRV_Channel: added tracker_yaw and tracker_pitch for antenna tracker channels
2017-01-12 17:39:37 +11:00
Andrew Tridgell
ea2e32c102
SRV_Channel: implement limit_slew_rate()
2017-01-12 17:39:37 +11:00
Andrew Tridgell
51864b23eb
SRV_Channel: cleanup header
2017-01-12 17:39:37 +11:00
Andrew Tridgell
fd081a8cc6
SRV_Channel: split SRV_Channel into separate directory
2017-01-12 17:39:37 +11:00