Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,549 Commits 71 Branches 509 Tags 715 MiB
Commit Graph

254 Commits

Author SHA1 Message Date
Andrew Tridgell 7b6d74be13 Plane: check motor spool state in vtol approach check 2019-02-25 13:29:00 +11:00
Andrew Tridgell bc95c25cc9 Plane: use WP height for height above ground in vtol landing 
this allows for landings above or below the takeoff height without
requiring the use of terrain data. It allows both the use of vfwd
motor for holding against wind, and the correct height for land final
descent rate
 2019-02-25 10:52:25 +11:00
Michael du Breuil 9d528205c7 Plane: Update throttle mix 2019-02-25 10:52:25 +11:00
Andrew Tridgell c755deff21 Plane: allow fwd motor to run in VTOL land hor positioning 
this fixes an issue with vtol landings below the takeoff point
 2019-02-25 10:52:25 +11:00
Michael du Breuil 7a33d949ca Plane: Don't overwrite the quadplane loiter relax 2019-02-25 10:52:25 +11:00
Andrew Tridgell 0c2ea764ce Plane: handle VTOL landing with incorrect height 
if landing above expected height then run landing detector to allow a
switch from LAND_DESCEND to LAND_FINAL

this prevents the plane sitting on the ground until the battery runs
out
 2019-02-25 10:52:25 +11:00
Andrew Tridgell c882262ff9 Plane: fixed EKF yaw reset 
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective

thanks to Leonard for noticing the bug!
 2019-01-15 10:41:50 +11:00
Andrew Tridgell a57f3880d1 Plane: fixed VTOL takeoff to ignore lat/lon in mission 
we should always takeoff vertically
 2019-01-11 12:42:18 +11:00
Andrew Tridgell 9b0d2eca07 Plane: Missing Loiter Init on accel 
# Conflicts:
#	ArduPlane/quadplane.cpp
 2018-09-19 13:22:42 +10:00
Leonard Hall 241972a300 QuadPlane: remove true from init of loiter 2018-09-15 10:25:12 +10:00
Andrew Tridgell 9a9dca045d Plane: do attitude relax after 100ms 2018-09-15 10:09:29 +10:00
Leonard Hall 9a3ed31040 QuadPlane: Remove repeat I term reset 2018-09-15 10:09:15 +10:00
Andrew Tridgell 4e148959c9 Plane: fixed relaxing of attitude controller on transition 
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
 2018-09-14 10:51:40 +10:00
Andrew Tridgell 58a363c643 Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors 
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
 2018-09-13 21:00:34 +10:00
Andrew Tridgell 0fd20b6d0c Plane: pass rc_speed to motor backend constructors 
this sets the right speed as early as possible
 2018-07-28 15:26:27 +10:00
IamPete1 eb7f752ec5 Plane: added Q_TAILSIT_THSCMX 
this provides more flexibility in tailsitter throttle scaling
 2018-07-19 14:46:53 +10:00
Andrew Tridgell d8a7618e15 Plane: update use of AC_Loiter controller for quadplane 
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.

The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.

This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
 2018-06-11 08:40:58 +09:00
Andrew Tridgell d07f8aa42b Plane: fixed a bug in transition to QSTABILIZE for tailsitters 
this bug was found bug Marco on his tailsitter. It resulted in zero
throttle for 2s in transition from FBWA to QSTABILIZE
 2018-04-25 18:01:12 +10:00
Randy Mackay 840a6e4147 Plane: quadplane uses AC_Loiter 
includes param conversion
 2018-04-04 10:45:10 +09:00
Peter Barker f6a185a3c3 Plane: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Randy Mackay 548a7f8fcf Plane: add minor comment to quadplane 2018-03-16 13:50:57 +09:00
Leonard Hall ee745d2cd2 Plane: quad plane uses rate-control control during transitions 2018-03-16 13:50:57 +09:00
Leonard Hall a16d4ddad7 Plane: quadplane uses poscontrol instead of loiter 2018-03-16 13:50:57 +09:00
Randy Mackay c5d838125b Plane: quadplane logs PSC message 2018-03-16 13:50:57 +09:00
Randy Mackay 09cad7c59d Plane: quadplane integrates attitude control inertial_frame_reset 2018-03-16 13:50:57 +09:00
Randy Mackay 03c162432e Plane: quadplane provides dt to AC_WPNav::set_pilot_desired_acceleration 2018-03-16 13:50:57 +09:00
Randy Mackay a0a9a68fbc Plane: quadplane smoothing gain replaced by Q_A_INPUT_TC 
Q_A_INPUT_TC parameter allows this to be tuned and a single value (which defaults to a value between the two previously used values) is used for all modes
 2018-03-16 13:50:57 +09:00
Leonard Hall aa47b19dea Plane: remove quadplane calls to multicopter poscontrol's freeze_ff_xy 2018-03-16 13:50:57 +09:00
Randy Mackay ddcd08d6b6 Plane: PSC_ACCZ param name shortened 2018-01-31 08:48:21 +09:00
Michael du Breuil aec7521da4 Plane: Fix truncation of a time interval 
Truncating the a millisecond time delta to uint16_t causes it to wrap
every 65 seconds, which could momentarily reset the desired climb rate
 2018-01-25 14:30:49 +11:00
Randy Mackay d579e086cf Plane: quadplane param index comment for moved PIDs 2018-01-24 21:14:53 +09:00
Andrew Tridgell 20b05e4228 Plane: added conversion code for PID layout change 
this copes with the move of multicopter PIDs inside the position
controller
 2018-01-24 18:23:59 +11:00
Randy Mackay 7b1157e2d8 Plane: remove setting accel_z PID controller's dt 
This is handled within pos-controller's set_dt function
 2018-01-23 12:00:43 +09:00
Randy Mackay f41f4dc6e5 Plane: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay 017e71a748 Plane: quadplane velocity pi moves to position control library 2018-01-23 12:00:43 +09:00
luweikxy 25224cd261 Plane: remove dead code from do_vtol_land 2017-12-14 20:52:18 +09:00
Andrew Tridgell f7a735b990 Plane: fixed transitions for tailsitters after auto-takeoff 
need to use angle wait
 2017-11-19 16:06:02 +11:00
Andrew Tridgell 957c1f6d23 Plane: extend QLOITER transition pitch limit 
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
 2017-11-05 21:35:32 +11:00
Andrew Tridgell 9c8cd6c1cc Plane: added Q_TRANS_DECEL 
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
 2017-11-05 20:44:42 +11:00
Andrew Tridgell e27c54a312 Plane: smooth out fwd tailsitter transition 
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
 2017-11-05 17:25:00 +11:00
Michael du Breuil d52f5155f0 Plane: Rename rc failsafe state members 2017-11-02 16:46:08 -07:00
nick2204 7d91755bd1 Plane: update Q_OPTIONS docs 
Made q_options description a little clearer
 2017-11-01 09:38:42 +11:00
Andrew Tridgell 1085069851 Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL 2017-10-30 16:52:19 +11:00
Andrew Tridgell 552faa8f67 Plane: smoother tailsitter transitions 
this smooths out tailsitter transitions in both directions, adding a
new FW to VTOL transition state
 2017-10-30 16:30:38 +11:00
Andrew Tridgell af893ddde7 Plane: implement Q_OPTIONS 
this allows for NAV_TAKEOFF to be treated as NAV_VTOL_TAKEOFF in
quadplanes, and for level flight to be maintained during quadplane
transitions
 2017-10-30 16:30:10 +11:00
Andrew Tridgell 02f8d888c3 Plane: relax controllers when disarmed 
this prevents any remaining integrator from a previous flight stage from
affecting flight across a disarm
 2017-10-30 16:30:10 +11:00
Andrew Tridgell 92ee05b925 Plane: fixed motor channel handling 2017-10-25 11:39:11 +11:00
Andrew Tridgell 6526ff504d Plane: fix for changes to AP_Motors API 2017-10-22 15:52:50 +11:00
Andrew Tridgell e008559b6e Plane: support LOITER_TO_ALT in quadplanes 2017-10-21 18:50:01 +11:00
Andrew Tridgell 8178ab4037 Plane: make mav_type in HEARTBEAT configurable 
needed for qgc to setup for quadplanes
 2017-10-20 15:41:06 +11:00