Andrew Tridgell
5a36b9955e
Copter: fix for HAL_SITL rename
2015-05-05 09:45:57 +10:00
Randy Mackay
054f05d285
Copter: AC3.3-rc3 version
2015-05-02 17:20:26 +09:00
Randy Mackay
606086cd6f
Copter: version to AC3.3-rc2
2015-05-02 11:34:19 +09:00
Robert Lefebvre
4e51ce6d75
Copter: rename "estop" to "emergency stop".
...
No functional change
2015-05-01 14:30:41 +09:00
Robert Lefebvre
a357ef43a4
Copter: Move Aux Switch flags into new Enum
2015-05-01 14:30:34 +09:00
Robert Lefebvre
16cf9471ae
Copter: Remove ap.motors_interlock, use only flag in AP_Motors
2015-05-01 14:30:31 +09:00
Robert Lefebvre
9b15ea6f5c
Copter: Change throttle_zero to check interlock and E-stop status
2015-05-01 14:30:30 +09:00
Robert Lefebvre
7349827eb1
Copter: Add Aux Switch E-Stop Function
2015-05-01 14:30:26 +09:00
Robert Lefebvre
7d745587a4
Copter: Add using_interlock flag, employ it in arming process
2015-05-01 14:30:22 +09:00
Robert Lefebvre
e4c5915330
Copter: initial creation of motor_interlock
2015-05-01 14:30:21 +09:00
Jonathan Challinger
73d961cebc
Copter: mavlink initiated takeoff in alt-hold modes
...
adds PILOT_TKOFF_ALT for target altitude above home in cm for pilot initiated takeoff
2015-05-01 12:56:18 +09:00
Randy Mackay
276b2dcf5e
Copter: move lost copter check to separate function
...
Also run from scheduler instead of from arm/disarm stick checks
Run at 10hz instead of 1hz
soundalarm_counter to uint8
Disable if equivalent aux switch is setup
Remove SEVERITY_LOW message because the GCSs never print these anyway
2015-04-29 00:05:03 +09:00
Julien Dubois
b7a6e3bf2c
Copter: fix update_thr_average to run at 100hz
...
Committed by Randy on Julien's behalf
2015-04-28 22:44:59 +09:00
Tom Pittenger
66c7090f00
Copter: fix compile warnings by converting .f to .0f
2015-04-24 14:24:52 +09:00
Randy Mackay
37e8d1a338
Copter: PosController alt limit from fence and EKF
2015-04-24 10:58:03 +09:00
Paul Riseborough
133b8f5ad7
Copter: Allow EKF to pull data from range finder object
2015-04-24 10:56:53 +09:00
Niels Joubert
704e75d140
ArduCopter: Remove kruft from old RTK driver
2015-04-24 08:01:32 +10:00
Randy Mackay
bfd24801ea
Copter: minor format fix
2015-04-21 21:47:19 +09:00
Arthur Benemann
7cf883a61c
Copter: increase the telemetry receive function rate to 400Hz
...
gimbal loop runs at 100Hz so to respond in time the gcs_check_input must run at a faster rate, the process are asyncronus
2015-04-21 21:45:31 +09:00
Randy Mackay
a27f383612
Copter: remove duplicate IMU/ATT logging
...
Previously IMU and ATT data could be logged at both a high rate
and a low rate. This patch makes it skip the low rate logging
if the high rate is enabled
2015-04-20 13:49:09 +09:00
Randy Mackay
dfb720bab6
Copter: rename FULL_IMU logging to IMU_FAST
...
This naming is consistent with the earlier ATTITUDE_FAST option and
clarifies that it's the rate that's increased rather than the content.
2015-04-20 13:49:04 +09:00
Randy Mackay
2dbff9c544
Copter: remove scheduler table for 100hz CPUs
...
We only support high performance CPUs capable of 400hz
2015-04-20 13:49:01 +09:00
Peter Barker
5a45de5e00
Copter: IMU full-rate logging LOG_BITMASK flag
2015-04-20 13:48:58 +09:00
Randy Mackay
1c6c03b0eb
Copter: firmware back to V3.3-dev
2015-04-18 11:51:53 +09:00
Jonathan Challinger
9a025024b5
Copter: use LowPassFilterVector3f for land detector accel filter
2015-04-17 10:46:56 +09:00
Jonathan Challinger
eafbd94d51
Copter: run land detector at 400hz
2015-04-17 10:46:53 +09:00
Leonard Hall
93d5c39248
Copter: add filter for the land detector
...
Individual access filtering will be replaced with a single 3-axis low pass
filter in the near future
2015-04-16 21:00:48 +09:00
Jonathan Challinger
e5a6023827
Copter: pass inertial_nav to fence
2015-04-14 16:10:03 +09:00
Randy Mackay
5a4039d99c
Copter: version to APM:Copter 3.3-rc1
2015-04-12 09:21:44 +09:00
Randy Mackay
b0c777259f
Copter: update home constantly while disarmed
2015-04-09 10:57:06 +09:00
Randy Mackay
2bec00e1c5
Copter: set ahrs home from ekf location
2015-04-09 10:57:02 +09:00
Randy Mackay
74b98b89d0
Copter: remove dcm check
2015-03-27 00:04:37 -07:00
Randy Mackay
522ef8f91f
Copter: rename MOT df msg to MOTB
...
This will slightly reduce confusion with the MOT message from AC3.1.5
that eventually became RCOUT
2015-03-18 21:25:45 +09:00
Randy Mackay
b679fd0be0
Copter: log RATE with ATT
2015-03-18 21:25:42 +09:00
Randy Mackay
e6c3f4f97b
Copter: move aux switch enum to defines.h
2015-03-17 21:18:49 +09:00
Robert Lefebvre
97cd3614eb
Copter: Change Aux Switch function list to enum.
2015-03-17 21:18:46 +09:00
Robert Lefebvre
a5af151a91
Copter: Initial expansion of Aux Switch to Ch7-12
2015-03-17 21:18:41 +09:00
Víctor Mayoral Vilches
79e152cd93
Copter: Update compass to the new interface
2015-03-13 18:46:16 +11:00
Randy Mackay
088a49abbf
Copter: remove APM1, APM2 support
2015-03-13 16:41:03 +09:00
Randy Mackay
fbfc94cf69
Copter: remove GPS glitch and failsafe
...
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
2015-03-13 16:40:46 +09:00
Randy Mackay
6f6847c025
Copter: use only InertialNav_EKF
...
remove calls to unsupported functions including ignore_next_error,
set_altitude, etc.
2015-03-13 16:40:37 +09:00
Randy Mackay
d7f624be39
Copter: remove baro_glitch protection
2015-03-13 16:40:27 +09:00
Leonard Hall
c537c38646
Copter: add update_throttle_low_comp
...
sets the priority of throttle vs attiude control so that attitude is
favoured (i.e. high throttle-low-comp) during dynamic flight while
throttle is favoured when vehicle may be landing.
2015-03-10 12:20:24 +09:00
Leonard Hall
d5bbe6de03
Copter: remove TRIM_THROTTLE
...
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
2015-03-06 14:02:19 +09:00
Leonard Hall
c78480e14f
Copter: rename loiter_pos to pos_xy
...
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
2015-03-06 14:02:17 +09:00
Leonard Hall
e232867661
Copter: move LOITER_RATE to 2-axis PI controller
...
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
2015-03-06 14:02:15 +09:00
Leonard Hall
8ba195a3a2
Copter: add Mot and Rate dataflash logging
2015-03-06 14:02:07 +09:00
Randy Mackay
bae424fa88
Copter: pass in loop_rate to motors constructor
2015-03-03 15:48:37 +09:00
Andrew Tridgell
7c975808f8
Copter: provide terrain height to rangefinder
...
used for power saving
2015-02-23 14:15:14 +11:00
Andrew Tridgell
191d803968
Copter: make PERF info message into a STATUSTEXT message
...
this makes it appear properly in tlogs. Also show both min and max
loop times
2015-02-16 10:02:53 +11:00
