Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
15,923 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

226 Commits

Author SHA1 Message Date
Randy Mackay 7e4dd9666c Plane: fix serial manager integration 2015-04-01 15:13:20 -07:00
Randy Mackay ab749f884f Plane: integrate Serial Manager instance 2015-04-01 14:59:26 -07:00
Andrew Tridgell dd1059cecf Plane: added arm_motors() and disarm_motors() helper functions 2015-03-17 10:12:00 +11:00
Andrew Tridgell b0cdf8952b Plane: added HIL_MODE parameter 
this allows for HIL with any firmware
 2015-03-13 22:52:56 +11:00
Michael Day b02098e19e Plane: Make radio trim optional at ground start. 2015-03-13 13:11:44 +11:00
Tom Pittenger 420e9e0d2e Plane: added INITIAL_MODE which is the mode we boot up into. 
This is useful when flying without a RX or if you have a RX that
outputs zeros without a detected Txmtr
 2015-03-13 13:04:23 +11:00
Andrew Tridgell 5175f21225 Plane: removed 1D accel calibration 2015-03-12 12:50:29 +11:00
Andrew Tridgell 16cdf64d63 Plane: added CLI_ENABLED option 
this disables using CLI by default, even if compiled in. This is
needed to make standard firmwares work well with companion computers
where the CLI may cause startup issues
 2015-03-09 17:58:37 +11:00
Andrew Tridgell 64dfc68784 Plane: log mode on arming 
this ensures the log is recorded with the right flight mode
 2015-02-23 14:15:14 +11:00
Jonathan Challinger 4105edaa87 Plane: use hal.util soft_armed state 2015-02-11 20:57:27 +11:00
Andrew Tridgell e0db5616a2 Plane: fixed HIL mode in plane 2015-02-10 09:53:30 +11:00
Andrew Tridgell 3edc1ea4db Plane: tell arming if logging is available 2015-02-06 19:05:02 +11:00
Randy Mackay ff2a31e3ae Plane: compile error fix when mount disabled 2015-01-29 14:05:15 +11:00
Randy Mackay 3a1465c9d1 Plane: integrate SerialManager 
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
 2015-01-29 14:05:15 +11:00
Randy Mackay 681d28838f Plane: integrate mount frontend-backend restructure 
initialise mount on startup
use mount.has_pan_control method
remove calls to unimplemented mount.configure_cmd
remove call to update_mount_type which is now handled by mount lib
 2015-01-29 13:57:18 +11:00
Matthias Badaire ee00302b62 Plane: Frsky telemtry change move parameter to init of the class 
Parameter needs to be passed and use at the init of the class frsky telem
 2015-01-22 16:49:39 +11:00
Robert Lefebvre a2d73b42b9 Plane: Change Mode logging to use DataFlash library method. 2015-01-21 14:37:36 +09:00
Andrew Tridgell 674a7aa8d4 Plane: use set_skip_gyro_cal() in arming library 2015-01-20 19:47:59 +11:00
Dario Lindo Andres 0ea7a7a0cc Plane: Corrected LOGGING_ENABLED 
When we configure LOGGING_ENABLED to DISABLED code does not
compile. Now it works!
 2015-01-17 10:42:11 +13:00
Andrew Tridgell 8f571f1225 Plane: make optflow available to AHRS 2015-01-03 14:16:34 +11:00
Andrew Tridgell eb13395967 Plane: cleanup mavlink_system setup 2014-12-17 11:30:04 +11:00
priseborough 898ad7432b Plane : Only build optical flow with PX4 board 
Fixes SITL compile errors
 2014-12-06 18:16:48 +11:00
priseborough f047e35167 Plane : Enable optical flow by default if sensor is fitted 2014-12-06 18:16:46 +11:00
priseborough 9707989b9f Plane : Preliminary optical flow integration 2014-12-06 18:16:45 +11:00
Andrew Tridgell a519e0abb6 Plane: fix build with new mavlink repo 2014-11-18 11:20:08 +11:00
Evan Slatyer c4093b159f ArduPlane failsafes: remove rc_override_active 
- rc_override_active is never set anywhere in the ArduPlane code; it's only used for Copter and Rover. Removing it significantly simplifies the failsafe code.
- modified code has been tested in SITL. Heartbeat and RC failures in AUTO, CRUISE, and RTL modes (covering the three cases in the failsafe check functions) have been simulated with FS_LONG_ACTN = 0, 1, and 2, FS_SHORT_ACTN = 0, 1, and 2, and FS_GCS_ENABL = 0, 1, and 2. In all cases the results are identical to those with the original code.
 2014-11-14 11:35:27 +11:00
Andrew Tridgell 7f5cc97769 Plane: changed for new AP_Airspeed API 2014-11-13 21:12:59 +11:00
Andrew Tridgell 0a318d3a68 Plane: move delay callback setup to after compass and airspeed config 
this ensure parameters sent on startup include compass settings and
airspeed offset
 2014-11-08 15:40:35 +11:00
Andrew Tridgell c494057c98 Plane: add support for generating a PX4 mixer for failsafe 
this creates APM/MIXER.MIX which will be used if the FMU dies to
provide manual control over RC
 2014-11-07 10:39:07 +11:00
Andrew Tridgell 538cf68005 Plane: removed unused function 2014-10-30 18:23:29 +11:00
Michael Day 01f611daa9 Plane: "Go around" operation. Assumes go around behavior follows land wp. 2014-10-24 21:51:46 +11:00
Andrew Tridgell 240e87dc2c Plane: update for new AP_InertialSensor API 2014-10-24 12:10:38 +11:00
Andrew Tridgell 05c325a12a Plane: display min as well as max loop delta_t 2014-10-22 18:27:12 +11:00
Andrew Tridgell f87da51b37 Plane: prevent calling jump_to_landing_sequence() too often 2014-10-20 08:36:20 +11:00
Andrew Tridgell 71d786187e Plane: make auto takeoff independent of compass 
this solves a problem of poor initial yaw due to poor compass offsets
causing a takeoff to not be in the direction the plane is pointing. A
summed gyro is used until the GPS speed is above 5m/s for 2 seconds,
then the GPS heading corrected by the summed gyro error is used for L1
based navigation for the rest of the takeoff
 2014-10-07 07:17:46 +11:00
Andrew Tridgell c4b17b74e2 Plane: use handle_set_mode() 2014-10-01 14:19:20 +10:00
Andrew Tridgell b6319a9d19 Plane: keep an estimate of the rangefinder altitude 
only accept data when we have had 10 samples in a row in range at 50Hz
 2014-08-27 17:14:19 +10:00
Andrew Tridgell daa32f9b62 Plane: reset steering integrator on mode change and when not moving 
this prevents an old integrator from causing problems on takeoff
 2014-08-25 08:20:37 +10:00
Andrew Tridgell f2f730ba9b Plane: added FBWA_TDRAG_CHAN parameter 
this allows for testing taildragger takeoffs in FBWA mode
 2014-08-24 19:39:51 +10:00
Andrew Tridgell 15a7f63d7e Plane: set GPS non-blocking 
the new GPS driver only ever needs a non-blocking port
 2014-08-19 10:08:17 +10:00
Randy Mackay 7d7272520e Plane: use baro healthy() 
Use baro last update time in place of healthy to determine whether HIL
sensor updates have started
 2014-08-14 16:03:28 +09:00
Andrew Tridgell 5e997b20f6 Plane: move battery init to after parameter load 2014-08-09 22:50:14 +10:00
Andrew Tridgell d54bb68270 Plane: prevent cross-track on some WP types 
when finishing a takeoff or when a user forces a WP change don't do
any cross-tracking. This avoids a problem where the plane tries to
line up with a track completely unrelated to the track currently being
flown
 2014-08-04 21:02:13 +10:00
Andrew Tridgell b64ab07ca4 Plane: added STAB_PITCH_DN_CD parameter 
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.

defaults to 200 centi-degrees. I may adjust based on flight tests
 2014-08-03 17:17:20 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry 
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
 2014-07-29 17:08:20 -07:00
Andrew Tridgell d18c00d6fc Plane: split up altitude handling 
this creates altitude.pde for altitude handling, getting ready to add
terrain following
 2014-07-24 21:50:19 +10:00
Andrew Tridgell ea086fa79c Plane: added MAV_CMD_DO_INVERTED_FLIGHT support 
allows for mission control over inverted flight
 2014-06-05 16:12:10 +10:00
Andrew Tridgell 1e2b644b1b Plane: fix for HAL_GPIO_* 2014-06-02 10:42:36 +10:00
Andrew Tridgell 286479ee93 Plane: prevent stalled takeoff with bad TKOFF_TDRAG_SPD1 
go to level pitch if pitch rises by 10 degrees
 2014-05-23 07:30:59 +10:00
Andrew Tridgell d87619c2f1 Plane: added 4 new parameters to control takeoff 
this gives flexible control for taildragger takeoff
 2014-05-23 07:30:58 +10:00