Jason Short
bb56cea1ac
ACM: increased the available rate error constrain, it was too low
2012-03-10 12:39:16 -08:00
Jason Short
285f2dd791
ACM: removed the experiment for rate error.
2012-03-10 12:38:29 -08:00
Jason Short
43b3e1ccd1
ACM -
...
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
2012-03-06 22:22:14 -08:00
Jason Short
27f6afd178
added stab_d gain scheduling
2012-02-28 20:16:40 -08:00
rmackay9
8da8ce5b58
ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine)
2012-02-28 22:56:26 +09:00
rmackay9
082cc70f1c
ArduCopter - Attitude.pde - updated get_rate_roll and get_rate_pitch to use new average filter.
...
modified all int to int16_t in Attitude.pde
2012-02-28 21:26:37 +09:00
Jason Short
a3f65b4a23
increased the rate error for more responsive alt hold
2012-02-25 13:31:21 -08:00
rmackay9
ab0e1d7632
TradHeli - increase max yaw input to 45 degrees
2012-02-24 20:18:40 +09:00
Jason Short
b1340bbf80
added a constraint to D term
2012-02-23 09:14:44 -08:00
Jason Short
70d7a1f5d0
Added slow_wp default in AP mode
2012-02-19 13:15:40 -08:00
Jason Short
03aa28224b
re-implemented WII Dampening filter for Marco.
2012-02-16 22:38:23 -08:00
Jason Short
6913400221
cast D term to float just in case
2012-02-16 22:09:21 -08:00
Jason Short
bb4c02fbff
Added acro_p to the params
2012-02-15 11:29:25 -08:00
Jason Short
11d1973abd
Added Acro_P
2012-02-15 09:10:14 -08:00
Andrew Tridgell
1af6f08b1c
adapted main ACM code for AP_Param
2012-02-13 16:22:52 +11:00
Jason Short
4f44ccc182
get_acro_yaw added
2012-02-10 22:32:55 -08:00
Jason Short
f3547a04a5
Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that.
2012-02-09 22:22:00 -08:00
Randy Mackay
1a1f6cac5d
OptFlow - reenable OF_LOITER pid controller and reduce I term
2012-02-01 08:04:18 +09:00
Jason Short
c855c81d2a
limiting alt hold rate error to 1m/s
2012-01-29 17:08:34 -08:00
Jason Short
0213f4dd88
2.2B6 - Please verify Heli still functions properly.
...
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Randy Mackay
2f84b54bbb
OpticalFlow - replaced PI controller with PID controller.
...
Modified optical flow hold to use aggregated position instead of speed.
2012-01-25 21:55:14 +09:00
Jason Short
02d6adb21f
slightly less filtering for less latency
2012-01-21 22:04:54 -08:00
Jason Short
8f86caa3ff
limiting the pitch throttle compensation
2012-01-21 11:59:49 -08:00
Jason Short
525f7cd40f
cleanup
2012-01-20 22:52:30 -08:00
Jason Short
d991a22453
Refined the D term for stabilize
...
moved all the rest_I terms from code into 1 central place
2012-01-20 22:52:29 -08:00
Jason Short
11e1df497d
lowered Loiter I, commented out unused var
2012-01-14 11:20:40 -08:00
Jason Short
f25d741f62
temp removed alt D term until more testing
2012-01-14 11:20:40 -08:00
Jason Short
9a0539f39e
tuned down Alt hold D gain
2012-01-13 09:36:51 -08:00
Jason Short
09c4bbe46e
Added simple constrain for Alt d term
2012-01-13 08:49:55 -08:00
Jason Short
5418d330f6
Added a small D term on alt hold
2012-01-12 22:28:58 -08:00
Jason Short
581657ab7a
climb rate control
2012-01-10 23:42:26 -08:00
Jason Short
9d1b1dba77
Added comments
2012-01-10 23:42:26 -08:00
Randy Mackay
7b9701fdd5
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Jason Short
3d7f3f6b77
removed unused var
2012-01-04 09:28:37 -08:00
Jason Short
e6887aa3ec
added Reset_Rate_I function
...
Removed I term from Throttle rate calc
Added some basic constrains to Acro
2012-01-04 09:28:37 -08:00
Jason Short
e17c8705ba
Loiter I reset
2011-12-31 09:45:25 -08:00
Jason Short
170a646ecf
removing I term clearance
2011-12-30 23:48:04 -08:00
Jason Short
8fc73844ee
Yaw Performance tweaks
2011-12-29 23:02:03 -08:00
Jason Short
89c705c8b9
removed loiter I from Reset Nav
2011-12-29 23:02:03 -08:00
Jason Short
83d52899b0
Added second order, filtered derivative in stabilize. Works much better than the non-filtered one I used to have.
2011-12-29 23:02:02 -08:00
Jason Short
dc2103d67f
the second accel test is just for fun.
...
Filtered output for Nav_throttle
2011-12-23 14:42:50 -08:00
Jason Short
ed818e4ccf
Cleanup
...
removed Iterm experiment - no noticeable effect in actual flight
2011-12-16 20:47:23 -08:00
Jason Short
2b5c039eae
turned off iterm for traverse
2011-12-15 20:51:41 -08:00
Jason Short
05e921f5d0
More power to descend
2011-12-15 20:51:40 -08:00
Jason Short
d5666f287c
added loiter control to reset nav
2011-12-14 22:08:41 -08:00
Randy Mackay
68d1fa6ec7
Arducopter - Attitude.pde - fixed small bug in pitch stabilise
2011-12-13 22:10:51 +09:00
Jason Short
424a11d269
Stability patch2 - Jose style.
2011-12-12 17:47:45 -08:00
Jason Short
4efbae4a1c
Hack to prevent fly aways
...
Cleanup to remove SIMPLE mode switch note
2011-12-11 12:01:06 -08:00
Jason Short
64cb2a54cf
eased up on the i term blocker
2011-12-10 23:25:52 -08:00
Randy Mackay
ced26d7ba2
TradHeli - Attitude.pde - made yaw contol use jason's stability patch
...
Quad - fixed small bug in pitch control (was using roll's stabilise controller)
2011-12-08 22:23:50 +09:00