Commit Graph

30497 Commits

Author SHA1 Message Date
Randy Mackay 942fed8ac5 AP_Mount: remove set_mode overrides
The mode state is local to the driver and does not depend upon successful communication with the gimbal
2022-10-04 16:50:15 +09:00
yaapu d483799f2d AP_OSD: Fixed UART thread ownership for the MSP DisplayPort OSD Backend 2022-10-04 16:50:15 +09:00
Henry Wurzburg 709888aaf7 SRV_Channel: change sw and output names to match new MOUNT params 2022-10-04 16:50:15 +09:00
Henry Wurzburg 13d4c796f8 RC_Channel: change sw and output names to match new MOUNT params 2022-10-04 16:50:15 +09:00
Michael du Breuil 187c97e946 AP_Arming: Expose ARMING_OPTIONS to all vehicles 2022-10-04 16:50:15 +09:00
murata 4d7e819bac AP_InertialSensor: Allow gyro counts to be returned 2022-10-04 16:50:15 +09:00
Andy Piper 5ce02708cf AP_InertialSensor: make sure dynamic notches always get updates so that slew limiting is not too aggressive 2022-10-04 16:50:15 +09:00
Andy Piper 6eff3922db Filter: constrain harmonic notch center frequency changes to be within a slew limit
raise notch filter slew for smaller aircraft
ensure NotchFilter init() resets the center frequency
2022-10-04 16:50:15 +09:00
Andy Piper adaed75a0d AP_Vehicle: make sure notches are not spurious disabled when not using throttle notch 2022-10-04 16:50:15 +09:00
Yuri 48d3cdbfe6 AP_HAL_ChibiOS: define skyviper short board names 2022-10-04 16:50:15 +09:00
Yuri 803e8e9b37 GCS_MAVLink: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri a6bbb13731 AP_Radio: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri 56bec53e2c AP_Logger: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri a898cbbd5d AP_HAL_SITL: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri b0bc7591dd AP_HAL_Linux: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri 9312c571c6 AP_HAL_ESP32: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri e84eda5317 AP_HAL_ChibiOS: define CubeOrange-SimOnHardWare short board name 2022-10-04 16:50:15 +09:00
Yuri 9b6e670c82 AP_HAL_ChibiOS: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Yuri 760af1fe37 AP_HAL: increase short board names to 23 chars 2022-10-04 16:50:15 +09:00
Peter Barker cd6b1b2667 AP_GPS: use default case for sending blob
This structure avoids a compiler warning that a statement isn't reachable when all backends are compiled out.
2022-10-04 16:50:15 +09:00
Peter Barker 945e342001 AP_GPS: no init blobs for SBF/GSOF/NOVA/SITL 2022-10-04 16:50:15 +09:00
Peter Barker 624a708c0d AP_GPS: cycle through baud rates for SBF/GSOF/NOVA/SITL 2022-10-04 16:50:15 +09:00
Iampete1 1d9fb68036 SRV_Channel: adjust trim, check all channels for range limit 2022-10-04 16:50:15 +09:00
Paul Riseborough cd3b7389ea AP_NavEKF3: Allow wind states to recover faster when airspeed sensor failed 2022-10-04 16:50:15 +09:00
Andrew Tridgell f367fe5a73 AP_Airspeed: allow EKF checking without wind max 2022-10-04 16:50:15 +09:00
Paul Riseborough a41a45a128 AP_Airspeed: Update documentation for used parameter index warnings 2022-10-04 16:50:15 +09:00
Andrew Tridgell db32d7c9bd AP_Logger: fixed missing doc field 2022-10-04 16:50:15 +09:00
Paul Riseborough f70ee99851 AP_Airspeed: remove unsupported parameter units descriptor 2022-10-04 16:50:15 +09:00
Paul Riseborough 642c8baee5 AP_Airspeed: Add tuning advice for ARSP_WIND_GATE 2022-10-04 16:50:15 +09:00
Paul Riseborough 810f0fb95b AP_Airspeed: Add hysteresis to consistency check 2022-10-04 16:50:15 +09:00
Paul Riseborough 2cc2bf2a71 AP_TECS: Assume flight at cruise speed if speed measurement not available 2022-10-04 16:50:15 +09:00
Paul Riseborough c6aeadd320 AP_Airspeed: Enable use of EKF3 to check airspeed health 2022-10-04 16:50:15 +09:00
Paul Riseborough e45d68d2e8 AP_Logger: Fix ARSP data type string 2022-10-04 16:50:15 +09:00
Paul Riseborough 05046c1400 AP_Logger: Add consistency test ratio to ASPD logging 2022-10-04 16:50:15 +09:00
Paul Riseborough 24cb640321 AP_AHRS: Add accessor function for airspeed health monitoring 2022-10-04 16:50:15 +09:00
Paul Riseborough 2edf166252 AP_NavEKF3: Allow reporting of airspeed consistency for a deselected sensor 2022-10-04 16:50:15 +09:00
Paul Riseborough 85c1c98a59 AP_NavEKF3: Add accessor function for airspeed health monitoring 2022-10-04 16:50:15 +09:00
Paul Riseborough 47189d2c73 AP_NavEKF3: Enable monitoring of unhealthy airspeed sensors
Innovations and innovation test ratios will still be calculated and reported for an unhealthy sensor, but the EKF states wnd covariance matrix will not be modified.
2022-10-04 16:50:15 +09:00
Andy Piper 6a60f1a421 AP_RPM: fix reporting of RPM from the harmonic notch 2022-10-04 16:50:15 +09:00
Andrew Tridgell 76c0825136 AP_Motors: added a SPIN_MIN check
and check SPIN_ARM <= SPIN_MIN
2022-10-04 16:50:15 +09:00
Andrew Tridgell fb28a26511 AP_BoardConfig: load CUAVv6X defaults when detected 2022-10-04 16:50:15 +09:00
Andrew Tridgell 394cdba297 AP_Param: make load_defaults_file() available on ChibiOS 2022-10-04 16:50:15 +09:00
Andrew Tridgell a036d14a1e hwdef: added CUAV_V6X default parameters 2022-10-04 16:50:15 +09:00
Andrew Tridgell 57c873d304 AP_CANManager: disable SLCAN when armed
this disables SLCAN if enabled using CAN_SLCAN_CPORT and
SERIALn_PROTOCOL=22 when we are armed, to reduce load on the CAN
thread from the very inefficient SLCAN processing
2022-10-04 16:50:15 +09:00
Andrew Tridgell 5c7a2b6369 hwdef: reduced memory usage on MatekF405-CAN board 2022-10-04 16:50:15 +09:00
Andy Piper 2c82fb5f38 AP_HAL_ChibiOS: make sure SkystarsH7HD has functioning VTX on Camera 1 by default 2022-10-04 16:50:15 +09:00
Andy Piper f345c21078 AP_HAL_ChibiOS: put RX on UART1 on Skystars H7HD bdshot
make sure VTX has power on Skystars H7HD at boot
2022-10-04 16:50:15 +09:00
Andy Piper 4be9377d54 AP_HAL_ChibiOS: hwdef for bdshot variant of SkystarsH7HD
Correct bootloader storage location for SkystarsH7HD
2022-10-04 16:50:15 +09:00
yaapu 191a44b471 ArduPlane: fixed roll and pitch for OSD VTOL view 2022-10-04 16:50:15 +09:00
Bob Long 43c06a1646 AP_Mission: initialize jump-tracking in init() 2022-10-04 16:50:15 +09:00