Andrew Tridgell
1a49549e3e
Plane: start port of main ArduPlane code to AP_HAL_PX4
2013-01-02 14:45:08 +11:00
Robert Lefebvre
b9594e7123
Parameters: Fixing a typo
2013-01-01 20:13:00 -05:00
Andrew Tridgell
9b434d167c
build: fixed CC build warnings
2013-01-02 10:19:55 +11:00
Andrew Tridgell
f7939ad179
AP_Relay: allow relay object in SITL
2013-01-02 10:19:43 +11:00
Andrew Tridgell
8d901b3f5a
HAL_AVR: fixed a warning
2013-01-02 10:19:28 +11:00
Andrew Tridgell
f3f703a6d8
VARTest: removed old APM_HARDWARE defines
2013-01-02 10:19:15 +11:00
Andrew Tridgell
c97f84864a
Rover: removed old file
2013-01-02 10:18:58 +11:00
Andrew Tridgell
b6295c12e1
Plane: fixes for new AP_Relay interface
2013-01-02 10:18:45 +11:00
Andrew Tridgell
4236b10edc
Copter: fixed board ID string
2013-01-02 10:18:05 +11:00
Andrew Tridgell
c980b32319
GPS: fixed state machine logic errors in MTK19 driver
2013-01-02 10:12:55 +11:00
Andrew Tridgell
17a63dc76a
Copter: fixes for AP_HAL merge
2013-01-02 09:55:55 +11:00
Andrew Tridgell
51d987a890
Copter: removed unusued variable
2013-01-02 09:55:55 +11:00
Andrew Tridgell
8c0d1d7084
GPS: fixed MTK19 driver for AP_HAL merge
2013-01-02 09:55:37 +11:00
rmackay9
9b2956b377
ArduCopter: increase throttle rate P to 6.0 (was 1.0) and alt hold P to 2.0 (was 1.0)
2013-01-02 09:55:37 +11:00
rmackay9
228ad2198f
ArduCopter: update firmware version to 2.9-rc2
2013-01-02 09:55:37 +11:00
rmackay9
2181ec2ab0
ArduCopter: log watchdog event to dataflash
2013-01-02 09:55:37 +11:00
rmackay9
16f99ebcab
ArduCopter: fix to sub system used to record failsafe in dataflash ERR message
2013-01-02 09:55:37 +11:00
rmackay9
672fdfbf71
ArduCopter: added ERR dataflash message
...
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
2013-01-02 09:55:37 +11:00
rmackay9
677b38a48e
ArduCopter: first implementation of surface tracking using sonar
...
Note: not yet enabled as part of any flight mode
2013-01-02 09:55:37 +11:00
rmackay9
92e271e517
AP_InertialNav: increase baro delay to 0.5 sec (was 0.2sec) to allow slower baro updates on APM1
2013-01-02 09:55:37 +11:00
rmackay9
d400e5040b
ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner
2013-01-02 09:55:37 +11:00
rmackay9
daac540e08
ArduCopter: get_throttle_althold - add check to avoid divide by zero
2013-01-02 09:55:37 +11:00
rmackay9
af4d998697
AP_InertialNav: correct lat/lon to cm
2013-01-02 09:55:37 +11:00
rmackay9
0decd870dc
ArduCopter: inertial nav - only initialise horizontal position when home is initialised
2013-01-02 09:55:37 +11:00
rmackay9
4c14010029
ArduCopter: update release notes for 2.9-rc1
2013-01-02 09:55:37 +11:00
rmackay9
576af6d487
ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan.
2013-01-02 09:55:37 +11:00
rmackay9
02bf3ea027
ArduCopter: Battery failsafe triggers RTL only if we are more than 15m from home, otherwise it performs a LAND
2013-01-02 09:55:37 +11:00
rmackay9
ff40fa6aab
ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate
...
Bug fix from Leonard.
2013-01-02 09:55:37 +11:00
rmackay9
68b62abd38
ArduCopter with the new Camera and Relay classes for APM1 and APM2.
...
All changes by Sandro Benigno
2013-01-02 09:55:37 +11:00
Sandro Benigno
6abe1fe94f
AP Camera changes required to work with modified AP_Relay lib.
2013-01-02 09:55:37 +11:00
Andrew Tridgell
0b2960e504
fixup relay merge
2013-01-02 09:55:37 +11:00
Sandro Benigno
cc7f26a99b
New Relay class and the subclasses for APM1 and APM2.
...
Updated AP_Camera class.
2013-01-02 09:31:32 +11:00
rmackay9
393c893cdb
ArduCopter: bug fix (attempt #2 ) for accel based throttle controller
...
Thanks to Jonathan for this.
2013-01-02 09:25:58 +11:00
rmackay9
e583ade62d
ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s)
2013-01-02 09:24:31 +11:00
rmackay9
e77b54c7dc
ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete.
2013-01-02 09:24:31 +11:00
rmackay9
e850ab7ccd
ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes
2013-01-02 09:24:31 +11:00
Craig@3DR
2de676306e
Improved parsing in auto detect
2013-01-02 09:24:31 +11:00
Craig@3DR
0ed25cf719
Global change all references from
...
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
2013-01-02 09:24:31 +11:00
rmackay9
5526ca204c
ArduCopter: on throttle failsafe, only initiate RTL if we are at least 15m from home
2013-01-02 09:22:51 +11:00
rmackay9
466097b383
ArduCopter: use inertial nav for current altitude and climb rate
2013-01-02 09:22:51 +11:00
Craig@3DR
8cfefbc275
Updated rev number in driver
2013-01-02 09:22:21 +11:00
rmackay9
5ba363b007
ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running
...
Also removed redundant heartbeat message
2013-01-02 09:21:35 +11:00
rmackay9
b8b17a4a70
ArduCopter: added AP_PerfMon library
2013-01-02 09:20:08 +11:00
rmackay9
331a73c4ac
ArduCopter: remove duplicate (?) send of MSG_EXTENDED_STATUS1
2013-01-02 09:20:08 +11:00
rmackay9
6baddf4aee
ArduCopter: remove unused variable last_5hz
2013-01-02 09:20:08 +11:00
rmackay9
1f5fdcdaa8
ArduCopter: remove unnecessary "Initialising APM message..."
2013-01-02 09:20:08 +11:00
Jason Short
8b62c4630b
ACM: Restore Multi-mode support
2013-01-02 09:20:08 +11:00
rmackay9
bd0e018ca0
ArduCopter: restore auto-trim method but now use AHRS.add_trim
2013-01-02 09:20:08 +11:00
Craig@3DR
e350bfbba8
Removed 2 more degree symbols from comments
2013-01-02 09:20:08 +11:00
rmackay9
b786cf40f7
ArduCopter: change GPS dataflash message to output unfiltered gps lat and lon
2013-01-02 09:19:39 +11:00
