Commit Graph

43 Commits

Author SHA1 Message Date
Amilcar Lucas b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
2012-07-26 11:30:23 +10:00
Jason Short 98237a0e00 Added Oilpan INS group object param 2012-07-18 23:07:50 -07:00
Jeff Taylor d02655ac56 APM: Fixed bug where landing_pitch wasnt initialized properly
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
2012-07-19 13:59:30 +10:00
Andrew Tridgell d6e370886f APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer
it is in cm/s, not m/s
2012-07-19 11:50:41 +10:00
Amilcar Lucas 610fdeacc1 Support up to 11 servos in APM2
Conflicts:

	ArduPlane/ArduPlane.pde
2012-07-18 22:01:19 +02:00
Andrew Tridgell de3c9ce56d Airspeed: change APM to use new AP_Airspeed library
the next step is AHRS dead reckoning
2012-07-16 11:21:50 +10:00
Andrew Tridgell 99b11e4f19 Mount: enable mount control via eeprom parameters
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
2012-07-03 10:21:01 +10:00
Andrew Tridgell 55092c25a6 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Andrew Tridgell 5bccfbd94c Barometer: fixed airstart for APM
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
Andrew Tridgell 619bcc00d9 APM: parameter enums should not be conditionally compiled 2012-06-15 11:57:00 +10:00
Andrew Tridgell 0900751bcd APM: added longer comment on k_format_version 2012-06-15 11:55:09 +10:00
Amilcar Lucas 6d2ac62006 Let's keep the same format version until CAMERA is activated by default 2012-06-13 21:28:13 +02:00
Amilcar Lucas 1906e06b69 Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Jason Short 37d8f86d33 Added missing Manual Level initializer 2012-06-10 13:08:22 -07:00
Pat Hickey 5766afa6c8 ArduPlane: Increment format number in Parameters.h
* Force all users to reconfigure to take advantage of elevon patch
  ( 669e6867 )
2012-05-28 20:51:12 -07:00
Andrew Tridgell b3aa704c49 AirSpeed: added parameter ARSPD_USE
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
2012-05-22 20:02:23 +10:00
Andrew Tridgell d07b77237e AHRS: enable AHRS_ group in ArduPlane 2012-04-16 20:55:13 +10:00
Andrew Tridgell 4c4c38f69a APM: Added MANUAL_LEVEL option
when MANUAL_LEVEL is set to 1, we don't do accelerometer levelling at
startup, and instead used the values saved in the EEPROM. This makes
it easier to do levelling on the bench, or once for a series of
flights for the day
2012-03-29 12:39:53 +11:00
Andrew Tridgell 718a5b70e3 AP_Param: fixed saving of sensor calibration
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
2012-02-18 10:51:57 +11:00
Andrew Tridgell 983192c5d5 tidy up a comment 2012-02-13 16:22:52 +11:00
Andrew Tridgell 676ca03977 expose mavlink stream rates as parameters 2012-02-13 16:22:51 +11:00
Andrew Tridgell e7174bc649 import new Parameters.h for AP_Param to APM 2012-02-13 16:22:51 +11:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
2012-01-15 16:10:28 -07:00
Doug Weibel 4de2155845 Tweak to FBW min altitude
Patch from Yury
2011-12-31 15:44:40 -07:00
Jason Short a6c09b3ea5 Small issue with newline formatting 2011-12-29 23:02:02 -08:00
Andrew Tridgell e99db6526f APM: added RST_SWITCH_CH parameter
This is useful for switching back to the mode indicated by the control
switch after a failsafe or fence breach. I was just changing modes
each time, but it is far more elegant to have a spring loaded switch
for "I am ready to take control again", rather than continually
changing modes.
2011-12-19 11:25:59 +11:00
Andrew Tridgell 3b148c87d5 geofence: main geo-fence code
this implements the primary logic of geo-fencing
2011-12-16 20:11:51 +11:00
Andrew Tridgell 82b615df50 geofence: added geo-fencing control parameters 2011-12-16 20:11:51 +11:00
Doug Weibel ca89857854 Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio!
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
2011-12-09 16:43:25 -07:00
Doug Weibel f752c4b799 Change to logging file system.
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
2011-11-17 21:25:51 -07:00
Doug Weibel 645b9c1d48 Initial rewrite of command logic.
Changes mission structure so that conditional and immediate commands are located between associated waypoints instead of after the second waypoint.
2011-10-27 13:45:52 -06:00
Doug Weibel 9cbc38b516 Add a feature for a minimum altitude parameter while flying in FBW-B
This patch written by YureZzZ - Thank you!
2011-10-16 23:11:40 -06:00
Janne M b5cfbd10ae Added voltage divider, input voltage and amps per volt to parameters. 2011-09-17 22:32:19 +03:00
Amilcar Lucas f08cea8044 These changes were meant to be inside commit a14c06adc06b. I'm sorry but reverting stuff is not that easy 2011-09-13 01:54:47 +02:00
Amilcar Lucas 5406991831 Added support for routing any function to any of the aux. servos.
This is a manual merge from the APM_Camera branch.
It reverts the stuff that Oliver did not menat to do with his commit 6dcbc7f44bc0
2011-09-13 01:24:06 +02:00
Amilcar Lucas 2fa92aea4c Fix RC range reversal 2011-09-11 04:12:04 +02:00
Amilcar Lucas 46185ee5d8 Revert "Fix RC range reversal"
This reverts commit d5046b1097b0b5455aa1a59e9dd80533e589432e.
2011-09-11 04:07:36 +02:00
Amilcar Lucas 51a8ec0ba8 Fix RC range reversal 2011-09-11 04:04:02 +02:00
Amilcar Lucas b7a0d8836a This is the real HEAD of the APM_Camera branch. Seams that lots of changes got lost in the SVN to GIT port 2011-09-09 16:18:38 +02:00
Andrew Tridgell 609ae8359d import APM_Camera branch from SVN 2011-09-09 11:45:13 +10:00
Andrew Tridgell e0dc1271d6 imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00