Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,840 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

5840 Commits

Author SHA1 Message Date
rmackay9 e33d314f1d AP_AHRS_MPU6000: resolve compiler warning re shadowing 2012-10-06 13:22:43 +09:00
rmackay9 f695db61ea ArduPlane: added AP_Semaphore.h to list of includes 2012-10-06 13:14:28 +09:00
rmackay9 61d0c8e35c ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9 b9963f5b5c DataFlash: modified to use AP_Semaphore for SPI3 bus when required. 
Also fixed test sketch which seemed broken.
 2012-10-06 12:41:50 +09:00
rmackay9 f9b16a9a50 AP_OpticalFlow: modified to use AP_Semaphore for SPI3 bus when required 2012-10-06 12:41:42 +09:00
rmackay9 23442f9caf AP_Semaphore: added new library to help remove conflicts over SPI bus 2012-10-06 12:41:35 +09:00
Michael Oborne fb1afa022f Mission Planner 1.2.14 
fix update/blank flightdata screen
add srtm blank file check
add Land to modes
 2012-10-05 07:39:45 +08:00
rmackay9 af1d6a9b82 ArduCopter: reduce Stabilize Yaw P term to 4.5 2012-10-03 14:19:49 +09:00
rmackay9 e375a27058 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9 ea4f256f8e ArduCopter: BATT_PIN parameter added to allow you to select which pin is used for voltage and current measurements 
To save a parameter, the current sensor pin is assumed to always be 1 higher than the voltage pin.
 2012-10-02 22:16:19 +09:00
Michael Oborne 3128e53212 Mission Planner 1.2.13 
remove some mavlink 0.9 code
add arm/disarm button. Not yet implemented AC and AP Side.
modify heli setup screen
modify failsafe screen
fix old firmware under mono
workaround mono crash.
modify planner wp storage
tweak log dl screen
add change alt button
modify tlog wp extractor, multiple extractions
speed up srtm reading
fix lang edit.
 2012-10-01 07:53:54 +08:00
Michael Oborne a38fef65c7 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 670fcbb634 AP_AHRS_MPU6000: fixed yaw correction and added _secondary_ahrs parameter 
_secondary_ahrs parameter allows mpu6000 ahrs to runin parallel with DCM.
 2012-09-30 00:21:18 +09:00
rmackay9 35cb7ff7e5 AP_PeriodicProcessStub: fixed build due to missing reference to _suspended 2012-09-29 14:41:25 +09:00
rmackay9 fcb2ff19bc APMrover2: fixed build 
Needed to remove references to MPU6000's CS pin in constructor
 2012-09-29 13:55:29 +09:00
rmackay9 8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 c007a19200 AP_PeriodicProcess: added running() method which tells the caller whether the timer is suspended or not 2012-09-29 13:47:55 +09:00
rmackay9 00e79e7915 AP_TimerProcess: added simple example sketch 2012-09-29 13:23:51 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 921ab3fe12 ArduCopter: bug fix to DMP initialisation (it was freezing due to SPI bus conflicts) 2012-09-28 18:34:23 +09:00
rmackay9 a7c2ea1891 AP_OpticalFlow: save and restore SPI bus speed to remove conflict with dataflash that runs at 8Mhz 2012-09-28 17:29:45 +09:00
rmackay9 bae53807b2 ArduCopter: tiny formatting change in defines.h 2012-09-27 17:40:54 +09:00
rmackay9 280488fa5e ArduCopter: bug fix to display ITERM enabled/disabled properly from cli 
Also changed header for this message type to ITERM instead of just IT to make it more clear what it is
 2012-09-27 17:40:30 +09:00
rmackay9 ed881117e0 ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9 6ed59fba91 AP_Motors: enable throttle curve by default 2012-09-25 23:36:35 +09:00
rmackay9 fff5d51694 ArduCopter: reduced Loiter Rate I to 0.04 (was 0.08) 2012-09-25 19:08:31 +09:00
rmackay9 a71aa21514 ArduCopter: increase default Loiter Rate P to 5.0 2012-09-25 12:19:44 +09:00
Andrew Tridgell bbec662483 APM: fixed build warning 2012-09-25 07:21:03 +10:00
Andrew Tridgell e04de04cbd Rover: fixed type of payload size 2012-09-25 07:20:54 +10:00
Andrew Tridgell 9f9d570597 MAVLink: comm_get_txspace should return 0 on error 
it is used in expressions that add constants
 2012-09-25 07:20:43 +10:00
Andrew Tridgell 14b1674c3e PeriodProcess: fixed build warning 2012-09-25 07:10:35 +10:00
Andrew Tridgell 81fd4b3a3c OpticalFlow: fixed SITL build 2012-09-25 07:10:22 +10:00
Andrew Tridgell 608cc60689 GPS: fixed SIRF auto detect code 2012-09-25 07:10:07 +10:00
Andrew Tridgell 89fa234233 SPI3: fixed the build 2012-09-25 07:03:23 +10:00
Michael Oborne 1ea946b2b4 modify ardurover name to match others 2012-09-24 18:31:47 +08:00
rmackay9 b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9 a75e93da06 AP_TimerProcess: add one additional slot for optical flow 2012-09-24 18:39:28 +09:00
rmackay9 163a7841f6 AP_OpticalFlow: small fixes to test sketch to make it work with modified lib 2012-09-24 18:39:22 +09:00
rmackay9 cb584f81fb AP_OpticalFlow: remove APM2 version of library now that AP_OpticalFlow_ADNS3080 class can autodetect which SPI bus the sensor is on 2012-09-24 18:39:17 +09:00
rmackay9 4d3d13582b AP_OpticalFlow_ADNS3080: detect if optical flow sensor is on standard or secondary SPI bus 2012-09-24 18:39:12 +09:00
rmackay9 ca383b393d AP_OpticalFlow: use AP_PeriodicProcess to read at 20hz 2012-09-24 18:39:07 +09:00
rmackay9 96bb6e9c70 SPI3: add new library to make use of secondary SPI bus 2012-09-24 18:39:01 +09:00
Andrew Tridgell fbc053e6e4 APM: change to one low priority status buffer per GCS instance 
this allows us to operate the low priority messages on each link
independently.

Thanks to David Buzz for the suggestion!
 2012-09-24 17:39:19 +10:00
Michael Oborne f5559a6b4a firmware build 2012-09-24 05:44:42 +08:00
Andrew Tridgell 51aeb2dd4c APM: prepare for 2.65 2012-09-24 07:14:30 +10:00
Andrew Tridgell d5c35fcc8b APM: fixed stick mixing for STABILISE mode 
this is embarrassing
 2012-09-24 07:14:30 +10:00
Michael Oborne ccc5f409c5 firmware build 2012-09-23 19:07:57 +08:00
Andrew Tridgell a4c3c5973d APM: prepare for 2.64 release 2012-09-23 19:32:56 +10:00
Andrew Tridgell 56c354eb4f APM: fixed stick mixing in CIRCLE mode on throttle failsafe 
Many thanks to Andke for finding this bug!
 2012-09-23 19:27:42 +10:00