Randy Mackay
def5ddb747
AP_Notify: disable buzzer along with external leds
2013-11-30 23:27:58 +09:00
Randy Mackay
f8b4187148
AP_Notify: define external led pins for non APM boards
...
resolves compiler errors
2013-11-30 23:27:27 +09:00
Randy Mackay
ec65fd136d
Copter: enable external leds
2013-11-30 22:54:13 +09:00
Randy Mackay
0b00f4d065
Rover: disable external leds
2013-11-30 22:54:05 +09:00
Randy Mackay
b6462c23af
Plane: disable external leds
2013-11-30 22:53:55 +09:00
Randy Mackay
aae18f9ead
AP_Notify: allow external leds to be disabled
2013-11-30 22:53:40 +09:00
Randy Mackay
e978a710cc
Copter: remove PIEZO_PIN definition
2013-11-30 18:21:01 +09:00
Robert Lefebvre
dbbe0f960a
Copter: remove LED_ON/OFF defines
2013-11-30 18:20:58 +09:00
Randy Mackay
59cea4b88c
Copter: remove CopterLED from main code
2013-11-30 18:20:55 +09:00
Randy Mackay
1f0fb3f06b
AP_Notify: add Buzzer
2013-11-30 18:20:51 +09:00
Robert Lefebvre
d1cf9f949f
AP_Notify: ExternalLED library
2013-11-30 18:20:49 +09:00
Randy Mackay
49ac1a48a5
Copter: Drift updates control_roll, pitch
...
control_roll, pitch should always hold desired roll and pitch angles now
that we have the RCIN dataflash message for recording pilot's input
2013-11-30 18:06:56 +09:00
Randy Mackay
a3be25750f
Copter: allow override of DRIFT_SPEEDGAIN
2013-11-30 15:35:59 +09:00
Randy Mackay
f12f0a6abe
Copter: drift file format fixes
...
tab replaced with four spaces
2013-11-30 15:29:26 +09:00
Andrew Tridgell
1124e84ae0
Plane: fixed APM1 build
2013-11-30 06:56:16 +11:00
Andrew Tridgell
6b4a3ef98b
Plane: added MAVLink sonar logging
2013-11-28 21:49:27 +11:00
Andrew Tridgell
5a0cb5dea4
Plane: added sonar logging to dataflash
2013-11-28 21:49:27 +11:00
Andrew Tridgell
ee7c742863
AP_Airspeed: changed default pin for SITL to pin 1
...
this leaves room for the sonar
2013-11-28 21:44:32 +11:00
Andrew Tridgell
b075f8735f
SITL: moved airspeed pin to pin 1
...
keep it separate from the sonar, allowing both to be used at the same time
2013-11-28 21:44:05 +11:00
Ben Nizette
339da1c21b
SITL: Add noise and glitching behaviour for the sonar sensor
2013-11-28 21:38:05 +11:00
Ben Nizette
70d37d2cf6
SITL: Wire in basic support for SITL downward-looking sonar sensors
2013-11-28 21:38:05 +11:00
Ben Nizette
f4d349eff8
SITL: Wire in random noise and fixed drift for the SITL barometer
2013-11-28 21:38:05 +11:00
Ben Nizette
59a54aae20
SITL: Add barometer drift parameter to the SITL library
2013-11-28 21:35:13 +11:00
Andrew Tridgell
f1bad032dd
PX4: added support for the MPU6000 on the v2.4 Pixhawk
2013-11-28 21:32:12 +11:00
Randy Mackay
90937be3d4
AP_Motors: fix example sketch
2013-11-28 11:34:00 +09:00
Randy Mackay
a744658b47
Copter: combine nav_roll and control_roll
...
Control_roll, control_pitch now always hold the desired lean angle
whether it be from the pilot or autopilot.
2013-11-27 23:11:30 +09:00
Randy Mackay
d7c636b4aa
Copter: remove yaw_in from ATT dataflash msg
2013-11-27 22:59:31 +09:00
Randy Mackay
f08cc010ea
Copter: firmware to ArduCopter V3.2-dev
2013-11-27 22:50:12 +09:00
Randy Mackay
7ef04bb73b
Copter: rename nav_yaw to control_yaw
2013-11-27 22:48:20 +09:00
Randy Mackay
f9e19b8006
TradHeli: remove use of motor_out array
...
No longer required for logging purposes as we have RCOU
2013-11-27 22:33:02 +09:00
Randy Mackay
851a538692
Copter: motor matrix comment change
2013-11-27 22:33:01 +09:00
Randy Mackay
652b4b4fe5
SingleCopter: motor test flaps servos in order
2013-11-27 22:33:00 +09:00
Randy Mackay
ccedf98238
Tri: call output_min at end of motors test
...
Minor change to comments
2013-11-27 22:32:49 +09:00
Randy Mackay
9f2086baf2
Copter: make motor_out array private
...
With new method of logging rc outputs access to the motor_out array is
not longer required
2013-11-27 21:55:28 +09:00
Randy Mackay
a8929cd746
Copter: more complete RC output reporting to GCS
...
Radio outputs are pulled from hal.rcout instead of from motors library
which provides more complete reporting because it includes output from
sources like the camera and mount libraries.
2013-11-27 20:31:21 +09:00
Randy Mackay
10d6a9a34e
Copter: replace Log_Write_Motors with Log_Write_RCOU
2013-11-27 20:18:18 +09:00
Randy Mackay
45ab18f131
Plane: rename Log_Write_SERVO to Log_Write_RCOU
2013-11-27 20:18:16 +09:00
Randy Mackay
ef2597a626
DataFlash: rename Log_Write_SERVO to Log_Write_RCOU
2013-11-27 20:17:41 +09:00
Randy Mackay
af657d58b9
Copter: RCIN dataflash logging
2013-11-27 16:46:25 +09:00
Randy Mackay
84fdff4cd6
Compass: slightly relax HMC5843 calibration limits
...
Some users have reported Z axis values as high as 1.33. Their compasses
seem otherwise health so extending the limits slightly.
2013-11-27 15:36:34 +09:00
Randy Mackay
7ae3014c14
Copter: parameter @Units to Percent*10
2013-11-26 22:35:11 +09:00
Randy Mackay
f8e2947823
RC_Channel: parameter @Units to pwm
2013-11-26 22:34:28 +09:00
Randy Mackay
fd9b115d01
INS: move Product ID to @User Advanced
2013-11-26 22:18:28 +09:00
Randy Mackay
c4df3ea187
Fence: parameter display name fix
2013-11-26 22:18:05 +09:00
Randy Mackay
14b3547830
Copter: rename some parameter Display Names
...
Also move some parameter descriptions to @User Advanced
2013-11-26 22:17:02 +09:00
Randy Mackay
c32d77c626
Copter: fix @Group for SingleCopter
2013-11-26 21:50:29 +09:00
Andrew Tridgell
9c812d5028
Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
2013-11-26 13:05:32 +11:00
Andrew Tridgell
49062d8a37
Copter: removed extra features of copter telemetry merge
2013-11-26 13:05:32 +11:00
Andrew Tridgell
a49710f20e
Copter: added uartD support
...
this also brings GCS_Mavlink.pde closer to the plane implementation
2013-11-26 13:05:32 +11:00
Andrew Tridgell
21eac34cd1
Copter: log system ID if available
2013-11-26 13:00:03 +11:00
