Commit Graph

46 Commits

Author SHA1 Message Date
Randy Mackay 57b291b1c5 Copter: reject change_command if not in AUTO 2013-11-14 13:49:37 +09:00
Randy Mackay 284aa2217f Copter: remove old comments 2013-09-24 21:45:43 +09:00
Randy Mackay b40cd07ce9 Copter: switch to LOITER when exiting mission 2013-08-15 13:09:57 +09:00
Randy Mackay 0d75203d87 Copter: minor format change to exit_mission function 2013-07-28 18:19:05 +09:00
Randy Mackay 7ea971d948 Copter: check set_mode for failure
Previously if set_mode failed it would return the copter to stabilize
mode.  With this commit set_mode returns a true/false indicating whether
it succeeded or not so the caller can make the decision as to the
appropriate response which could be to stay in the current flight mode
or try another flight mode.
2013-07-20 11:01:10 +09:00
Tobias cf426fcb3e Copter: fixed a compiler warning
* removed useless comparison: if (int8_t t >= 255) ...
* revealed by -Wtype-limits
* saved 6 bytes
2013-07-08 14:53:30 +10:00
Randy Mackay b3bca271d4 Copter: rename verify_must to verify_nav_command
Perhaps easier to understand if we use the "nav" and "conditional"
command labels
2013-05-10 12:06:29 +09:00
Randy Mackay 74dca6da22 Copter: move update_commands to run_autopilot fn
update_commands was being run in the medium_loop counter but it is
easier to understand the flow of the code if it is consolidated along
with other autopilot calls.
2013-04-24 20:59:49 +09:00
Randy Mackay 1ee825ee9a Copter: move alt and wp checking to AC_WPNAV
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
2013-04-14 10:39:23 +09:00
Randy Mackay e592baae11 Copter: remove remnants of fast_corner 2013-04-14 10:38:20 +09:00
Randy Mackay cbde042ec5 Copter: remove non-inav loiter and wp controllers
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
2013-02-24 14:41:52 +09:00
rmackay9 9a05d3bd36 ArduCopter: add comments at the top of many navigation functions 2012-12-09 15:50:50 +09:00
rmackay9 9dd978576b ArduCopter: auto yaw changes to allow pilot override of yaw during missions
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw).  We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
2012-12-08 14:23:32 +09:00
rmackay9 a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Jason Short d2a5928c06 Ap state updates 2012-11-09 22:15:15 -08:00
Jason Short a0752dc7dc ACM Acceleration management
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
2012-10-21 14:32:39 -07:00
Jason Short 6b6075ed30 ACM l Prevent pre-mature finish of mission 2012-09-12 23:06:06 -07:00
uncrustify 1e2c01d8f6 uncrustify ArduCopter/commands_process.pde 2012-08-21 18:56:00 -07:00
rmackay9 a72bf6ef57 ArduCopter: replaced abs with labs as required in a few places.
Also fixed a small bug in the get_stabilize_pitch function in which it was using the roll (instead of pitch) to decide whether it should let the i term build-up or not.
2012-08-16 17:51:09 +09:00
Jason Short be0559864c ACM : switched to get_bearing_cd 2012-08-09 17:04:30 -07:00
Jason Short b5156185cc ACM Commands parser to look for future nav commands to inspect upcoming turn angle 2012-08-09 16:59:43 -07:00
Jason Short fd97eb5a8d commands
fixed logic bug to make a copter loiter after the mission is ended.
2012-07-03 17:38:50 -07:00
Jason Short 2ad08fdd98 RTL: Commands.pde
When we are out of commands we land or Loiter at the RTL_Approach_altitude.
2012-07-01 13:40:11 -07:00
Adam M Rivera 61baa666c4 commands_process.pde: Bug fix 427. By default, the copter would land after an AUTO mission. Updated to check for valid approach altitude at end of mission. 2012-06-29 21:41:56 -05:00
Jason Short 7833cea9d4 2.2B6 - Please verify Heli still functions properly.
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Jason Short 5ac26a5500 error on comparison operator 2012-01-20 22:52:30 -08:00
Jason Short 932869b686 renamed function 2012-01-20 22:52:30 -08:00
Jason Short 98f637282b moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short e102cb9e6a Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short 78255b722e Slowed Auto Descent
Don't return true in Landing code to prevent flyways in Stabilize
2012-01-08 23:01:22 -08:00
Jason Short 48c211e055 Added finish to missions - auto-land or stabilize 2012-01-07 22:27:26 -08:00
Jason Short c7b5b747e8 change how Reset Nav params work - no longer clear I terms 2012-01-04 09:28:36 -08:00
Jason Short 2cb09f46e9 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Andrew Tridgell f5e439554d fixed == that should be = 2011-12-12 15:19:50 +11:00
Jason Short 69dd8264e6 adding flag for finished mission 2011-11-28 22:28:51 -08:00
Jason Short 504b4b52d6 slight refactoring to avoid the increment issue when changing commands 2011-11-28 10:33:06 -08:00
Jason Short a168691eba Working implementation of Jump Command 2011-11-16 21:28:56 -08:00
Jason Short 0245e73a8b Mission Scripting re-write 2011-11-16 00:22:23 -08:00
Jason Short 687d0eda98 fixed bad indexing for setting current mission index 2011-11-13 22:59:57 -08:00
Jason Short d6bfae598f WIP: adding 255 to represent a completed mission 2011-11-12 21:40:33 -08:00
Jason Short c8304114a3 renamed some command variables to align with Arduplane
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Andrew Tridgell d89ae696ef merged the GCS updates from ArduPlane to ArduCopter
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
2011-10-11 20:53:43 +11:00
Jason Short ddc5ced162 removed saving - not needed for copters 2011-09-18 16:28:53 -07:00
Jason Short 151cae6074 Jump command was reported to have issues, updated to match APM branch. 2011-09-18 16:27:43 -07:00
Andrew Tridgell 1456a2a912 renamed top level directories
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00