Paul Riseborough
fb5e25aca4
AP_Airspeed: Update documentation for used parameter index warnings
2022-10-04 13:38:30 +11:00
Paul Riseborough
6729c4310b
AP_Airspeed: remove unsupported parameter units descriptor
2022-10-04 13:38:30 +11:00
Paul Riseborough
2a5f8b6f58
AP_Airspeed: Add tuning advice for ARSP_WIND_GATE
2022-10-04 13:38:30 +11:00
Paul Riseborough
444cf997aa
AP_Airspeed: Enable use of EKF3 to check airspeed health
2022-10-04 13:38:30 +11:00
Henry Wurzburg
db496cf256
AP_Airspeed: correct metadata in libraries failing checks on emitter
2022-08-16 11:50:11 +10:00
Andrew Tridgell
eed14b3688
AP_Airspeed: fixed autotest for copter param parse
...
This command was failing:
Tools/autotest/param_metadata/param_parse.py --vehicle Copter
I don't understand why it starts to fail now, but this is the fix
2022-06-08 09:23:04 +10:00
Peter Barker
dd2283d73b
AP_Airspeed: add SITL backend
2022-05-25 17:52:44 +10:00
Ruffalo-sunghwan
001643eb4f
AP_Airspeed : correct comment spelling
2022-05-24 20:27:45 +09:00
Peter Barker
19190fb134
AP_Airspeed: log airspeed primary changes
2022-05-17 10:27:57 +10:00
Joshua Henderson
5087eabbca
AP_Airspeed: remove negative pressure set unhealthy
2022-05-10 16:58:51 +10:00
Peter Barker
4b95ad12bf
AP_Airspeed: allow backends to be compiled out
2022-05-10 09:02:51 +10:00
Gone4Dirt
2ff83bea53
AP_Airspeed: Add enabled check to get functions
2022-05-05 17:44:16 +10:00
Gone4Dirt
e82ba228ce
AP_Airspeed: Add nullptr check to healthy function
2022-05-05 17:44:16 +10:00
Gone4Dirt
edb25340d1
AP_Airspeed: Move multi-line functions out of header
2022-05-05 17:44:16 +10:00
Mirko Denecke
d6843c4ca1
AP_Airspeed: fix auxiliary typo
2022-05-02 10:55:08 +10:00
Henry Wurzburg
fa81f7813c
AP_Airspeed: correct metadata for params for non-Plane vehicles
2022-04-05 09:58:10 +10:00
Tom Pittenger
42d1ce635b
AP_Airspeed: improve description of ARSPD_TUBE_ORDR
2022-03-08 14:34:58 -08:00
Iampete1
72a65cadb8
AP_Airspeed: rename get_health_failure_probability to get_health_probability
2022-03-02 16:14:50 +11:00
Peter Barker
2d0d2a123d
AP_Airspeed: move Airspeed up to AP_Vehicle, use dummy class for Copter
2022-01-19 18:21:32 +11:00
Josh Henderson
1831a1a009
AP_Airspeed: NFC add note about TYPE 0 index
2022-01-19 18:21:32 +11:00
Josh Henderson
bf65b2eba8
AP_Airspeed: move default type for SITL to be for only Plane
2022-01-19 18:21:32 +11:00
Joshua Henderson
3cfbad0f4d
AP_Airspeed: add AP_AIRSPEED_ENABLED
2022-01-19 18:21:32 +11:00
Hwurzburg
7c6816ec70
AP_Airspeed: change UAVCAN in metadata to DroneCAN
2021-12-15 09:53:21 +11:00
Peter Barker
f9580c0dfe
AP_Airspeed: add date for parameter conversion code
2021-11-23 12:27:14 +00:00
Josh Henderson
ea4c3d68d6
AP_Airspeed: make MAV_SEVERITY levels higher
2021-11-03 18:06:48 -07:00
Iampete1
89c0a8ea04
AP_Airspeed: use floats for get/set output scaled
2021-10-20 18:29:58 +11:00
Hwurzburg
b327f80946
AP_Airspeed: do not cal if backend does not exist
2021-10-07 13:36:44 +11:00
Peter Barker
22e9ad4818
AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Andrew Tridgell
f65620f4f3
AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
...
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Andrew Tridgell
cbf549b1eb
AP_Airspeed: fixed display of ARSPD_DEVID when ARSPD2_TYPE=0
2021-07-21 18:22:11 +10:00
Andrew Tridgell
5f87335325
AP_Airspeed: review updates
...
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-07-12 17:14:59 +10:00
Andrew Tridgell
0bdd8231cf
AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
...
if the MS4525 has its own LDO then we are should disable the
correction
2021-07-12 17:14:59 +10:00
Andrew Tridgell
ca1508b02e
AP_Airspeed: added DEVID parameters for airspeed
...
this makes log analysis easier
2021-07-12 17:14:59 +10:00
Peter Barker
6da68e39f8
AP_Airspeed: add rc channel option to disable all airspeed sensors
2021-06-23 15:13:13 +10:00
Peter Barker
00002b78a4
AP_Airspeed: remove HIL support
2021-06-15 09:47:31 +10:00
QioTek
0190a42e47
AP_Airspeed: added ASP5033 driver
2021-03-28 07:50:34 +11:00
Andrew Tridgell
857d905d9f
AP_Airspeed: added MSP backend
2020-12-08 20:41:12 +11:00
Peter Barker
de2802e322
AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
...
Without this ARSP[x].Airspeed isn't populated
2020-12-08 11:59:49 +11:00
Peter Barker
8647dda8a9
AP_Airspeed: add and use instance number to ARSP message
2020-11-24 12:19:45 +11:00
Iampete1
0e41b821e8
AP_Airspeed: defualt to type none on sub
2020-10-27 11:24:49 +11:00
Iampete1
2aff8787c1
AP_Airspeed: add NMEA water speed backend
2020-10-27 11:24:49 +11:00
Iampete1
662d4640ef
AP_Airspeed: add dedicated MAX_WIND param
2020-10-27 11:21:04 +11:00
Andrew Tridgell
505953bdb2
AP_Airspeed: added get_num_sensors()
2020-08-27 20:20:51 +10:00
Andrew Tridgell
a20d3fed94
AP_Airspeed: allow hwdef override of airspeed default type
2020-08-25 09:59:15 +10:00
Siddharth Purohit
d65b43795a
AP_Airspeed: move to using CANManager library
2020-08-19 17:31:09 +10:00
Josh Welsh
eb4b5fb720
AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O
2020-08-12 08:02:49 +10:00
Henry Wurzburg
21940cea09
AP_Airspeed: fix airspeed messages for consistency
2020-07-21 09:41:05 +10:00
Andrew Tridgell
40f1b5f9ae
AP_Airspeed: use GCS_SEND_TEXT()
2020-04-29 07:36:55 +10:00
Peter Barker
6046aa3625
AP_Airspeed: rename APMrover2 to Rover
2020-04-14 09:50:34 +09:00
Andrew Tridgell
b5e091bc84
AP_Airspeed: hide unused parameters for AP_Periph
2020-02-18 11:15:05 +11:00