Andrew Tridgell
20be77ab32
APM: when land_complete is true, use land_pitch
...
this gives a flare on final landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
b8521ff9ae
APM: reload airspeed and throttle after landing
...
this allows for restarting a mission after landing with reasonable
airspeed values
2012-08-15 12:39:35 +10:00
Andrew Tridgell
f4023d1b44
AP_Airspeed: remove airspeed filter and run at 10Hz
...
this saves on the filter memory, and gives just as good a result
2012-08-15 12:39:35 +10:00
Andrew Tridgell
a361a3aebd
AP_AnalogSource: make read_average() return a float
...
this allows it to take advantage of better than 1 bit resolution by
averaging
2012-08-15 12:39:35 +10:00
Andrew Tridgell
4b5d98e65b
APM: added RDRSTEER_ PID for steering on ground
...
this allows for rolling takeoff with steering, and use of rudder in
landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
ce5f3dcfe2
APM: report speed changes via MAVLink
2012-08-15 12:39:35 +10:00
Andrew Tridgell
1b152ef9e0
APM: implement FENCE_ACTION_REPORT
...
when FENCE_ACTION is set to FENCE_ACTION_REPORT a fence breach is
reported, but the flight mode is not changed
2012-08-15 12:39:35 +10:00
Andrew Tridgell
7bb8fa1e58
MAVLink: added FENCE_ACTION_REPORT
2012-08-15 12:39:35 +10:00
Andrew Tridgell
44852276da
AHRS: added ahrs.yaw_initialised()
...
this allows the high level code to know if the AHRS driver has a
reliable yaw estimate
2012-08-15 12:39:34 +10:00
Andrew Tridgell
90bf9c62bb
SITL: added a test script for starting in Kingaroy
...
we use this for OBC testing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
8c3b6f471f
APM: keep the time of the last heartbeat message
...
this will be used for failsafe processing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
b54ab2d72a
APM: expose change_command() and geofence_breached() to libraries
...
this makes a failsafe library easier
2012-08-15 12:39:34 +10:00
Andrew Tridgell
dd17302def
APM: show waypoint number in jump message
2012-08-15 12:39:34 +10:00
Andrew Tridgell
c525b6b997
APM: minor formatting fix
2012-08-15 12:39:34 +10:00
Andrew Tridgell
b018d7ba77
SITL: make it easier to start ArduPlane SITL at any location
...
this generates a jsbsim startup XML file from a template
2012-08-15 12:39:34 +10:00
Andrew Tridgell
93f45f232f
APM: added 'OBC' failsafe module for ArduPlane
...
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.
This includes:
- manual pin
- heartbeat pin
- waypoint for heartbeat failure
- waypoint for GPS failure
2012-08-15 12:39:34 +10:00
Andrew Tridgell
98015636d9
APM: interpret zero lat/lng as being current location
...
this makes it easy to have a "loiter in current position" mission
element
2012-08-15 12:39:34 +10:00
Andrew Tridgell
98d5a49717
APM: fixed LOITER_TIME and LOITER_TURNS
...
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
2012-08-15 12:39:34 +10:00
Andrew Tridgell
26749a7486
Failsafe: only read RC on new data
2012-08-15 12:39:33 +10:00
Andrew Tridgell
9c19ff1a2c
Failsafe: added COMPETITION_MODE
2012-08-15 12:39:33 +10:00
Andrew Tridgell
b499d1cc00
Failsafe: prototype of APM2 based failsafe system
2012-08-15 12:39:33 +10:00
Jason Short
2cc27b9804
ACM: Switched to filtered loc
2012-08-14 14:11:52 -07:00
Jason Short
5d64942f01
ACM: Switched to filtered_loc for distance calcs
2012-08-14 14:11:52 -07:00
Jason Short
cbd4661b96
ACM: Added a filtered version of Location for GPS lag.
...
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
2012-08-14 14:11:51 -07:00
Jason Short
ba6ec9ae45
ACM: Revved the version
2012-08-14 14:11:51 -07:00
rmackay9
95c59fd4a4
ArduCopter: remove RTL_LAND parameter as it's been deprecated in favour of APPROACH_ALT.
...
Updated comments on ALT_HOLD_RTL and APPROACH_ALT to make it a little easier to understand.
2012-08-14 12:14:35 +09:00
rmackay9
71710b4514
AutoTest: set RTL's APPROACH_ALT to zero to force the copter to land instead of hanging out at 2m and causing the auto test to time out
2012-08-14 12:03:32 +09:00
rmackay9
34517349db
AutoTest: update failsafe timeout to 180 to give it more time to pass.
2012-08-14 11:25:10 +09:00
Pat Hickey
394a3059b7
APM_RC_APM2: updated comments for clarity
2012-08-13 15:34:17 -07:00
rmackay9
b5480daa69
ArduRover: deleting this. Please see APMRover2 for latest Rover code.
2012-08-14 00:31:50 +09:00
rmackay9
9edda1407a
ArduRover: latest rover code is in APMRover2 directory
2012-08-14 00:31:12 +09:00
rmackay9
4e7e78d091
AP_RC_Channel: deleted this library as nobody seems to be using it.
...
Everyone is using RC_Channel instead which includes parameters.
2012-08-13 16:36:10 +09:00
rmackay9
c22f3ae563
GPS_IMU: deleted this empty library as nobody seems to be using it.
2012-08-13 16:35:29 +09:00
rmackay9
cb71edb427
Waypoints: deleted this library as nobody seems to be using it.
2012-08-13 16:35:08 +09:00
rmackay9
8f475f9d38
Trig_LUT: deleted this library as nobody seems to be using it
2012-08-13 16:34:50 +09:00
rmackay9
1115dde0d4
AP_EEPROMB: deleted this library as nobody seems to be using it.
2012-08-13 16:34:33 +09:00
rmackay9
a3a56c488a
APM_RC: rename example sketch directories for APM2 so they can be opened easily from arduino ide
2012-08-13 11:50:53 +09:00
Andrew Tridgell
562069cbd7
AHRS: avoid a compiler bug in quaternion code
...
Having _wind in the AP_AHRS class causes a register allocation error
when building the Quaternion code with some versions of avr-gcc. Quite
bizarre.
2012-08-13 11:08:10 +10:00
Jason Short
455cfa4caa
ACM: Toy mode updates - added second toy mode
2012-08-11 22:37:27 -07:00
Jason Short
4eb66699e1
ACM : Toy mode updates
2012-08-11 22:37:27 -07:00
Jason Short
4f14baf5e5
ACM: Toy mode updates
2012-08-11 22:37:26 -07:00
Jason Short
abe7a12fba
ACM : Added check for second Toy mode
2012-08-11 22:37:26 -07:00
Jason Short
0eed8853b4
ACM : Added CH7 multimode triggers, split Toy mode into two
2012-08-11 22:37:26 -07:00
Jason Short
9134271073
ACM : CH_7 multimode option added
2012-08-11 22:37:26 -07:00
Jason Short
609d5cd1d4
ACM : Added CH_7 Multimode
2012-08-11 22:37:26 -07:00
Michael Oborne
b04d76049c
Mission Planner 1.2.5
...
add experimental antenna tracker find
add new apparam eeprom reader
add ground alt display to hud
mod stats
modify guided mode alt selection.
test flight planner tab on flight data tab
move some functions to the right click menu
add xplanes data in/out setup to be automatic.
add better mission upload handeling.
2012-08-12 12:25:22 +08:00
Andrew Tridgell
fa1b72adc5
AHRS: use airspeed for wind in forward flight
...
when not turning we can use the airspeed sensor directly to calculate
the wind speed.
2012-08-12 10:54:25 +10:00
Andrew Tridgell
35c88dd418
INS: disable INS AP_Param table when not on APM1 hardware
...
this could cause overwriting of memory with default values
2012-08-11 22:06:03 +10:00
Andrew Tridgell
3a92509b18
AHRS: added AHRS_GPS_USE parameter
...
this allows for the GPS to be disables for position updates, which
allows for testing dead-reckoning
2012-08-11 22:06:03 +10:00
Andrew Tridgell
3b9623a44c
Mavlink: log wind estimation result
2012-08-11 22:06:03 +10:00