Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
30,434 Commits 70 Branches 507 Tags 663 MiB
Commit Graph

300 Commits

Author SHA1 Message Date
Andrew Tridgell 89674482a7 Copter: added FLTMODE_CH parameter 
this allows for the flight mode to be on any RC channel, or no channel
at all to disable RC flight modes
 2018-01-27 12:01:35 +09:00
Pierre Kancir cfc69214e6 Copter: add LAND_ALT_LOW parameter 2018-01-24 21:14:35 +09:00
Randy Mackay 8d6f8e4d9c Copter: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay 6546ccbb3f Copter: velocity pi moved to position control library 2018-01-23 12:00:43 +09:00
Peter Barker 996115c0d3 Copter: eliminate MAIN_LOOP_SECONDS macro 2018-01-20 15:35:58 +11:00
ChrisBird caaeae3d0a Copter: Separate max ascent and descent speeds 
Added equivalent parameters to WPNAV_SPEED_UP and WPNAV_SPEED_DN

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Flight Modes impacted:
ALTHOLD
AUTOTUNE
CIRCLE
LOITER
POSHOLD
SPORT
TAKEOFF

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.
 2017-11-09 09:03:54 +09:00
Randy Mackay 787954fa37 Copter: integrate winch library 
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
 2017-10-27 09:20:38 +09:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
squilter ba0e08552f Copter: add SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Eugene Shamaev 24c390ade0 ArduCopter: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Randy Mackay 713c08672f Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Peter Barker bd6ffc025e Copter: start conversion to AP_Arming_Copter 2017-01-17 11:45:08 +09:00
Andrew Tridgell 5a87ae3f01 Copter: use new SRV_Channels API 2017-01-12 17:39:37 +11:00
Randy Mackay e32ddaa7fa Copter: reorder beacon and proximity declaration 
resolves compiler warning
 2017-01-04 19:58:53 +09:00
Randy Mackay 12d024e0c6 Copter: rename FRAME to FRAME_TYPE 
This unifies the plane and copter parameter names
 2016-12-31 10:55:23 +09:00
Randy Mackay 0ac00dbfd6 Copter: add FRAME_CLASS parameter 2016-12-31 10:55:23 +09:00
Andrew Tridgell c3b9dbf5c8 ArduCopter: Add EKF3 and remove EKF1 2016-12-19 08:07:09 +11:00
Randy Mackay 21c7ea1df7 Copter: integrate AP_Beacon 2016-11-30 17:56:55 +09:00
Peter Barker 236b8ab6b7 Copter: make EPM a subclass of AP_Gripper_Backend 2016-11-05 10:20:39 +09:00
Peter Barker 920868145c Copter: support for AP_Gripper 2016-11-05 10:20:33 +09:00
Peter Barker df07cb525a Copter: use AP_Stats to store statistics about vehicle 2016-10-29 14:53:25 +09:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 5a9276a5c4 Copter: added SYSID_ENFORCE parameter 
allows enforcement of SYSID_MYGCS
 2016-10-15 17:14:19 +11:00
Leonard Hall 5c47f3f9e5 Copter: add acro throttle and yaw expo and smoother manual pilot throttle 2016-10-15 11:27:53 +09:00
Randy Mackay 0aab175051 Copter: move proximity to g2 2016-10-14 14:02:29 +09:00
Randy Mackay fcc2a1b378 Copter: integrate AP_Proximity into main vehicle 2016-10-13 20:21:07 +09:00
Andrew Tridgell d0dd10aeea Copter: added DEV_OPTIONS parameter 
this is for little used options to allow standard firmware builds to
enable those options for development purposes

First option is for MAVLink based ADSB avoidance
 2016-09-12 16:24:34 +10:00
Andrew Tridgell f18e0dadc9 Copter: added optional AdvancedFailsafe for copter and heli 2016-08-25 14:14:18 +10:00
Andrew Tridgell 89c10a2db9 Copter: rename WP_TKOFF_NAV_ALT to WP_NAVALT_MIN 
this is in preparation for using the same parameter for landing as
well
 2016-08-16 11:26:56 +10:00
Randy Mackay 9842840346 Copter: GND_EFFECT_COMP parameter to enable ground effect compensation 2016-08-09 13:31:36 +09:00
chambana 25940c8e0f Copter: add THROW_TYPE and allow dropping vehicle to trigger motors 2016-08-02 20:25:52 +09:00
Randy Mackay f0f87a2f0c Copter: add throw_nextmode 
vehicle switches to mode specified in THROW_NEXTMODE parameter after the
throw is completed.
 2016-08-02 20:25:52 +09:00
Randy Mackay d50987f976 Copter: avoidance_adsb implements copter avoidance using ADSB 2016-07-25 20:24:37 +09:00
Andrew Tridgell cb5ca713a9 Copter: added AP_Button support 2016-07-22 15:01:20 +10:00
Andrew Tridgell 3a8ed06267 Copter: added TKOFF_NAV_ALT parameter 
this adds TKOFF_NAV_ALT which controls the altitude above takeoff that
navigation can begin. It is meant for unstable vehicles such as helis
to prevent blade strike during initial takeoff.

This also adds a new parameter class ParametersG2 which can hold 64
parameters. This is to avoid running out of parameters in the first
256 block
 2016-07-07 14:21:47 +09:00
Daniel Ricketts 87be8daf0e Copter: integrate AC_Avoidance library 2016-06-22 11:38:15 +09:00
Leonard Hall 48eb4cf674 Copter: remove THR_MID 2016-06-18 11:55:49 +09:00
Leonard Hall dec9323127 Copter: remove THR_MIN 
Equivalent is AP_Motors SPIN_MIN
 2016-06-18 11:55:49 +09:00
Andrew Tridgell 045e3c179a Copter: moved EKF2 to a new parameter index 
the meanings of many of the parameters have changed. Best to use a new
index to prevent old parameters from causing crashes
 2016-05-25 19:35:17 +10:00
Randy Mackay 7689315ba2 Copter: rename sonar to rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay 74e02d2c82 Copter: rename TERRAIN_USE to TERRAIN_FOLLOW 
This matches plane's parameter name
 2016-04-30 10:33:01 +09:00
Randy Mackay 91f6c7b503 Copter: add TERRAIN_USE parameter 
Also add terrain.cpp to hold terrain_update and terrain_logging functions
 2016-04-30 10:33:01 +09:00
Randy Mackay bde498375c Copter: remove attitude PIDs 
These are now part of AC_AttitudeControl
 2016-04-01 11:59:30 +09:00
Randy Mackay 1f37f5a0e7 Copter: remove tradheli swash, yaw and rsc servos 
These are all created within the AP_MotorsSingle class now except for servo_rsc which was unused
 2016-04-01 11:59:30 +09:00
Leonard Hall 6c40d6f774 Copter: remove single frame's servo objects 2016-04-01 11:59:30 +09:00
Leonard Hall 44180e44df Copter: remove coax servo objects 
servos moved to AP_MotorsCoax class
 2016-04-01 11:59:30 +09:00
Leonard Hall a00a9601a4 Copter: AP_MotorsCoax now uses 4 servos 2016-04-01 11:59:30 +09:00
Andrew Tridgell f19922fec5 Copter: added LAND_SPEED_HIGH parameter 
this is the descent rate for the first part of a landing. Separating
this from WPNAV_SPEED_DN allows for independent tuning of fast fwd
flight from landings
 2016-03-30 15:54:20 +11:00
Lucas De Marchi e88ba38595 ArduCopter: replace header guard with pragma once 2016-03-16 18:40:44 +11:00