Commit Graph

291 Commits

Author SHA1 Message Date
Andrew Tridgell 3aa52bb5ee Plane: added a value for RTL_AUTOLAND to disable arming check
set RTL_AUTOLAND=3 to get go-around but not RTL DO_LAND_START usage
2022-03-30 11:37:41 +09:00
Andrew Tridgell fe26956947 Plane: added APIs for lua ship landing 2022-03-12 08:01:18 +09:00
Andrew Tridgell a8adf187ae Plane: link in AP_Follow
ready for ship landing
2022-03-12 08:01:18 +09:00
Joshua Henderson c1abcfb7c4 Plane: move Airspeed to AP_Vehicle 2022-01-19 18:21:32 +11:00
Andrew Tridgell b619ee4970 Plane: added support for rate yaw control
to enable for ACRO mode, set ACRO_YAW_RATE to desired maximum rate in
degrees/second, and set YAW_RATE_ENABLE=1 to enable PID tuning of yaw
rate controller

pair programmed with Andy Palmer and Matthew Hampsey
2021-11-30 16:19:26 +11:00
Peter Barker 70562021ac ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED 2021-11-15 20:27:40 +11:00
Peter Barker 203103bae5 ArduPlane: ensure ENABLE_SCRIPTING is always defined 2021-11-15 20:27:40 +11:00
Peter Barker 554e7f8d1c ArduPlane: move EFI to AP_Vehicle 2021-11-05 09:22:17 +11:00
Peter Barker 6a12d3f5d9 Plane: use enum class for StickMixing 2021-11-03 18:06:00 +11:00
Iampete1 8e693e5cd1 Plane: remove TRIM_AUTO param 2021-09-28 09:16:24 +10:00
Iampete1 b18da48f39 Plane: remove AUTO_FBW_STEER 2021-09-12 22:12:32 -05:00
Iampete1 e6968395c6 Plane: remove none-functional NAV_CONTROLLER param 2021-09-08 20:32:52 +09:00
Iampete1 fd7a879c85 Plane: remove unused params 2021-09-08 17:21:23 +10:00
Iampete1 88f2f7ccae Plane: remove unused param OVERRIDE_SAFETY 2021-09-01 18:46:18 +10:00
Peter Barker bfe9208849 ArduPlane: add and use HAL_BUTTON_ENABLE 2021-08-25 19:03:42 +10:00
Andrew Tridgell f472da8e90 Plane: added ONESHOT_MASK parameter
after discussion with Paul on servo latency
2021-07-23 14:47:14 +10:00
Andrew Tridgell 1ae669bb01 Plane: added manual input expo for MANUAL, ACRO and TRAINING
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00
Peter Barker 055e82276e ArduPlane: remove HIL support 2021-06-15 09:47:31 +10:00
Hwurzburg e958306343 Plane: Add options to USE_REVERSE_THRUST to cover all flight modes 2021-06-15 07:05:02 +10:00
Andrew Tridgell 0937d903a1 Plane: use HAL_EFI_ENABLED 2021-06-09 18:07:00 +10:00
Iampete1 60d26723ae Plane: make TERRAIN_FOLLOW at AP_int32 bitmask, per mode option 2021-03-24 10:15:18 +11:00
Iampete1 cca5e62c89 Plane: move RST_SWITCH_CH to RCx_OPTION 2021-03-17 19:18:46 +11:00
Iampete1 7226a3a9dc Plane: move FBWA_TDRAG_CHAN to RC Options 2021-03-17 19:18:46 +11:00
Iampete1 5f555e5314 Plane: move CHUTE_CHAN to RC Options 2021-03-17 19:18:46 +11:00
Iampete1 eeab196d91 Plane: move RST_MISSION_CH to RC option 2021-03-17 19:18:46 +11:00
James O'Shannessy aae092b88f ArduPlane: Remove all unused geofence capability
ArduPlane: Remove missed geofence logic
2021-03-05 14:52:46 +11:00
James O'Shannessy 17fb585bf1 ArduPlane: Add support for AC_Fence
ArduPlane: Remove some geofence logic from ArduPlane

ArduPlane: Refactor action and mode return implementation

ArduPlane: Use polyfence to find the return point.
2021-03-05 14:52:46 +11:00
Tom Pittenger c653ff880a Plane: extend Stream rates param count to match MAVLINK_COMM_NUM_BUFFER 2020-12-29 07:52:09 -07:00
Andrew Tridgell 52f61c7ac1 Plane: make FENCE_AUTOENABLE an AP_Enum 2020-12-02 18:33:07 +11:00
Samuel Tabor 10111f92d5 Plane: Rename SOARING_ENABLED to HAL_SOARING_ENABLED and don't compare to ENABLED. 2020-09-24 07:30:48 +10:00
Siddharth Purohit fb180fa431 Plane: move to using CANManager library 2020-08-19 17:31:09 +10:00
Buzz 0f5177b291 Plane: Support a set of offboard MAVLink guided controls with rates
+ 3 rounds of fixes
2020-05-20 15:03:21 +10:00
Andrew Tridgell 8b21f5117a Plane: implement RTL_CLIMB_MIN parameter
this allows for an initial climb on RTL where roll is limited to
LEVEL_ROLL_LIMIT
2020-05-18 13:04:04 +10:00
Paul Riseborough 40cc5a5006 ArduPlane: Improve EKF failsafe in VTOL modes
Replicates Copter behaviour with a three step process if the EKF sustains a loss of navigation as detected by high GPS innovation test ratios:

1) Attempts a yaw reset using the GSF estimate if available
2) Attempts a lane switch
3) Falls back to a non-position mode
2020-05-14 10:40:48 +10:00
Iampete1 3ded030fa8 Plane: compensate forward throttle for battery voltage drop 2020-05-05 09:46:41 +10:00
Peter Hall 660c9a8a60 Plane: move from FLAP_IN_CHANNEL to RCx_Option 2020-01-01 08:11:01 +11:00
Andy Piper eca398e7a2 Plane: create generic vehicle management and move runcam to it 2019-12-30 13:02:04 +11:00
Peter Barker 33a0e55b32 Plane: correct duplicate button instance 2019-12-10 09:29:52 +09:00
Andrew Tridgell 2b27cd2ce9 Plane: Add EFI Support 2019-11-17 20:10:54 +11:00
Andrew Tridgell ff400243e0 Plane: added a new TAKEOFF flight mode
takeoff then circle in direction of takeoff
2019-10-17 12:19:43 +11:00
Mark Whitehorn f054301ec2 Plane: add QACRO roll/pitch/yaw rate params 2019-04-23 09:46:38 +10:00
IamPete1 520f5f7894 Plane: add crow flap options paramiter 2019-04-04 09:18:11 +11:00
Peter Barker 73707077b5 Plane: move enabled parameter into compass library 2019-04-02 10:24:49 +11:00
Andrew Tridgell 3907466f9d Plane: added TKOFF_TIMEOUT parameter
this allows for a timeout on auto-takeoff. This can be combined with
other takeoff parameters to allow the user to abort a hand-launch
after the motor has started without GCS interaction.

The 4m/s threshold is a bit arbitrary. We could make that a parameter
in the future if it is needed
2019-03-18 14:48:08 +11:00
Peter Barker 40856fef56 Plane: remove vestiges of old PX4_MIXER code 2019-01-19 19:31:03 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Andrew Tridgell 1d00d26b9e Plane: added parameters for crow flaps
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
Eugene Shamaev 01178a75e9 Plane: added landing gear support 2018-11-09 14:35:14 +11:00
Andrew Tridgell d5c29fc57e Plane: use IOMCU mixing if available 2018-11-07 07:35:45 +11:00
Andrew Tridgell a00e06ea13 Plane: added TKOFF_ACCEL_CNT for multi-shake to start
this allows you to setup shake to start with a lower accel threshold,
but with multiple fwd/back movements needed.

This implements https://github.com/ArduPilot/ardupilot/issues/2221
2018-10-31 18:53:36 +11:00