Commit Graph

1369 Commits

Author SHA1 Message Date
jasonshort bdcd0e2e37 Added Scaling to yaw response on Auto, RTL, and Guided modes
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2837 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-11 00:54:00 +00:00
jasonshort 35bf288abd New PIDs - I rewrote the control laws from scratch to add a PI Rate function. The end result should fly nearly identically to the current version. The nice detail is that we can use NG PID values for easy transition!
Before: ->  After
Stabilize P –> Stabilize P (Use NG values, or 8.3 x the older AC2 value)
Stabilize I –> Stabilize I (Stays same value)
Stabilize D –> Rate P (Stays same value)
–> Rate I (new)
 
Added a new value – an I term for rate. The old stabilization routines did not use this term. Please refer to the config.h file to read more about the new PIDs.
Added framework for using DCM corrected Accelerometer rates. Code is commented out for now.
Added set home at Arming.
Crosstrack is now a full PID loop, rather than just a P gain for more control. 
Throttle now slews when switching out of Alt hold or Auto modes for less jarring transitions
Sonar and Baro PIDs are now combined into a throttle PID Yaw control is completely re-written.
Added Octa_Quad support - Max



git-svn-id: https://arducopter.googlecode.com/svn/trunk@2836 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-11 00:47:08 +00:00
tridge60@gmail.com 165643c307 fixed 5843 detection code
we were looking for the wrong regA value

Thanks to Chris for the debugging help! (and happy birthday!)

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2828 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 22:27:15 +00:00
tridge60@gmail.com 7b803a9e1a compass: added error checking on I2C transactions
this adds error checking to all operations on the compass, to ensure
that we don't accept invalid data

This also fixes the calibration values for the 5883L to match the
recommended values in the spec

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:10:00 +00:00
tridge60@gmail.com 488a2805f7 mavlink: fixed a signed/unsigned warning
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:09:50 +00:00
jasonshort a16b00b5bf Added heavily filtered Accelerometer values for experimentation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2779 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:58:19 +00:00
jasonshort 5e163c6052 added ki_Yaw private variable and accessors.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2778 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:57:12 +00:00
jasonshort 0d31d9be10 Added a limit to the atan function to calc the heading. Just trying to avoid, bad values screwing up the DCM. - Jason
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2777 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:56:04 +00:00
jasonshort 38cf90ae58 AC 2.0.33 Beta
Slighted tuned down D term in Loiter PIDs after testing, tuned up P slightly
fixed alt hold bug cause when gaining 3D lock in alt hold.
Mavlink now reports correct throttle scaling value in mavlink


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2746 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-04 06:40:37 +00:00
jasonshort 659b520912 AC 2.0.33 Beta
Slighted tuned down D term in Loiter PIDs after testing, tuned up P slightly
fixed alt hold bug cause when gaining 3D lock in alt hold.
Mavlink now reports correct throttle scaling value in mavlink


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2745 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-04 06:37:29 +00:00
deweibel@gmail.com 4015e7f91a Commit test - just adding an unneeded comment
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2740 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 19:39:55 +00:00
tridge60@gmail.com 90b0d769f8 compass: fixed normal operation mode change for 5883L
We need to set the right rates after config too. Thanks to Randy for
spotting this one

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2737 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 12:00:45 +00:00
tridge60@gmail.com d46536e142 compass: fixed output rate and averaging for 5883L
we need to setup the right output rate, or the compass gets very laggy

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 08:32:58 +00:00
deweibel@gmail.com 0df8daeaed Correct bug in CLI log "enable all" command.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2733 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 01:58:41 +00:00
jasonshort a7a4f999e3 AC 2.0.32 Beta
new Loiter PIDs
tuned down control on standard frame
shunk the mixing range for sonar from 3 meters to 2 meters
added framework for Guided mode - not tested!
removed pitch and roll deadzone
decoupled SIMPLE mode from LOITER PIDs
Synced Mavlink with APM
Logs report correct WP number now.
disabled Sonar spike filter.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2722 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 22:44:59 +00:00
tridge60@gmail.com 2605c4b4b2 AP_Compass: fixed calibration of 5883L compass
this fixes a compass initialisation bug where if the first value from
the compass isn't in the right range we would set bad calibration
scaling factors.

This also changes the maximum acceptable calibration values to 2000,
which is needed for the 5883 compass

pair-programmed-with: Randy Mackay

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2718 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:38 +00:00
tridge60@gmail.com c78da666ec AP_Compass: report compass initialisation failure
don't just put out rubbish values

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2717 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:27 +00:00
rmackay9@yahoo.com d310744bfc AP_Compass_test - added display to auto detected compass
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 16:26:27 +00:00
jasonshort cf0a068f7c Fixed bug in alt hold caused by false Sonar readings.
Reverted to prior Rangefinderlib in case that was causing bad sonar readings.
reduced crosstrack gains and max angle to avoid overshoots and oscillations.
added additional D gain to Loiter hold to prevent overshoots
added D gain to WP_nav to avoid speed oscillations
upped navigation speed to 6m/s from 4.5m/s


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2710 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 00:19:10 +00:00
jasonshort 00222a2e20 temporally revert to prior version of Sonar class to narrow in on a bug.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-30 22:32:26 +00:00
rmackay9@yahoo.com 8ce403cbe4 AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2700 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:47:53 +00:00
rmackay9@yahoo.com da7a13128a AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
jasonshort 203bc4643d clean up to work better with the Mission planner and enable Camera control.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2697 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 06:31:18 +00:00
jasonshort 09c02ed44f changed camera stabilization to 1 instead of ENABLED
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2696 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-27 19:57:40 +00:00
jasonshort f9c402f0f3 2.0.29
Fixed Mavlink issue
Added look at home option for SIMPLE mode. Off be default. Untested.
Upped performance of Yaw.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2695 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-27 17:01:53 +00:00
jasonshort 418a4b3903 removed redundant FP calcs for speed up.
added ability to alternate normalization and drift correction. Not fully implemented, needs further testing.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2691 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 22:54:08 +00:00
jasonshort 4247586584 2.0.28
Fixed a mode switch issue. 

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2685 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 17:02:47 +00:00
analoguedevices@gmail.com 276b2c0966 commented out line 833 in main pde that was causing compile error, as per this report:
http://diydrones.com/forum/topics/2027-prolems-compiling-solved?xg_source=activity

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2679 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 14:15:26 +00:00
jasonshort bcea99f64c 2.0.27
Fixed GCS updates, 
Clear GCS Streamrates by default.
moved fast PWM functions to run all the time (for quads, experiment)
cleaned up Mavlink a bit.




git-svn-id: https://arducopter.googlecode.com/svn/trunk@2678 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:38:11 +00:00
jasonshort fe16f5d7a4 IMU speedup by shorting the temp calculation. If someone bothers to temp calibrate their sensors, they'll need to edit this shortcut.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:23:22 +00:00
DrZiplok cd864714ea Add a simple tool for dumping AP_Var data from an EEPROM dump.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
jasonshort 8f036514f4 minor formatting, enabled sonar spike filter.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2670 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 05:59:06 +00:00
jasonshort 254a93343d extra \ removed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2669 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 00:42:57 +00:00
jasonshort 9d6d0de021 Forgot to add setup for V Octo support from Dani Saez
Added start of contributors list into code comments.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2668 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 17:09:59 +00:00
jasonshort bc13dac119 formatting
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2658 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:41:48 +00:00
jasonshort d2ce6ebf8d 2.0.26
minor updates, 
Arming motors now for only Stabilize, Simple, and Acro Modes.
V Octo Support


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2657 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:37:54 +00:00
james.goppert 56483bc322 Added debug/ upload targets to Arduino.mk
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
james.goppert a3950ca63e Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
DrZiplok 582cc1e229 Enable map file generation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
deweibel@gmail.com 8d7e7ff58e revert gps lib to 2602
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
deweibel@gmail.com 26d1ec1f56 remove static declaration from idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2607 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:26:57 +00:00
deweibel@gmail.com 5b9e7eff9d clean up idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
deweibel@gmail.com b53b749fc7 Fix initialization of idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
dhcorley@msn.com 6be97515ac re-sync rawgps cli test with APM2 (r2501)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2601 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 17:11:54 +00:00
jasonshort 7521ceed61 Vector3<T>() { x = y = x = 0; }
changed to :
	Vector3<T>() { x = y = z = 0; }

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2600 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 16:31:31 +00:00
dhcorley@msn.com 098ac1599b Add planner menu item on main menu . (issue tracker 194)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2599 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 15:17:08 +00:00
dhcorley@msn.com 4d67241537 syncing planner.pde with APM2. For planner menu item on main menu . (issue tracker 194)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2598 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 15:12:55 +00:00
jasonshort 1345a2ac6d 2.0.25
changed Yaw to be offset from current angle to avoid the kick back.
Made minimum motor speed user settable, upped to 13% (130)
tweaked alt hold D to be higher and P to be slightly lower.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2579 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-19 05:31:33 +00:00
jasonshort 9c4517cfd2 update to Baro lib to remove temp filtering.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2569 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-18 05:08:48 +00:00
jasonshort b69012803d log merge with APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2568 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:12:10 +00:00