Leonard Hall
|
7402444ffe
|
AC_AttitudeControl: AC_PosControl: add soften for landing
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
2a7e0e225e
|
Plane: quadplane: double log QPOS state change
|
2022-03-12 08:01:18 +09:00 |
Peter Barker
|
dab83e292e
|
Plane: use has_valid_input in place of checking throttle counter
|
2022-03-12 08:01:18 +09:00 |
Henry Wurzburg
|
1b7fe466cb
|
ArduPlane: clarify and simplify RC failsafe messages
|
2022-03-12 08:01:18 +09:00 |
Peter Barker
|
0a56aa5b17
|
ArduPlane: add RebootRequred to stream rate parameters
|
2022-03-12 08:01:18 +09:00 |
Peter Barker
|
0feed119cd
|
AP_HAL_ChibiOS: allow specification of AUTOBUILD_TARGETS in hwdef files
|
2022-03-12 08:01:18 +09:00 |
Andy Piper
|
875e5c232f
|
waf: move external flash binaries to regular name to aid publishing
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
034d5a048d
|
Rover: loiter: sailboats don't try and sail directly into the wind
|
2022-03-12 08:01:18 +09:00 |
m
|
eff8313edf
|
Copter: Pause/Continue in AUTO and GUIDED modes with SCurves
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
4bdfc0d88e
|
Copter: Add pause in guided mode
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
98fa2f35ae
|
Copter: WP Pause support
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
2aa3c0c478
|
Copter: tighten auto_takeoff_complete checks
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
b32072c130
|
Copter: remove loiter_nav from auto
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
806e82a603
|
Copter: auto and guided takeoff use postion controller
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
4d712d61dc
|
Copter: use position controller for landing reposition
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
bbfcf37d5d
|
AP_Math: fixed build error on cygwin
ensure variables are always initialised
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
1ccc2311ba
|
AP_Math: SCurve: Increase corner speeds
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
1386ac40cf
|
AP_Math: Convert S-Curves to use maximum Snap to remove minimum time between waypoints
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
9e7716273a
|
AC_WPNav: Support pause
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
ed11b95281
|
AC_WPNav: init optionally accepts stopping point
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
0de932345a
|
AC_Loiter: use Pos_Control soften_for_landing_xy
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
43d59769fe
|
AC_WPNav: Increase corner speeds
|
2022-03-12 08:01:18 +09:00 |
Leonard Hall
|
c16e736bc6
|
AC_WP_Nav: Convert S-Curves to use maximum Snap to remove minimum time between waypoints
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
7d9c7a8780
|
Tools: added Sierra-F9P bootloader
|
2022-03-12 08:01:18 +09:00 |
MallikarjunSE
|
ca5c60bb69
|
Tools: Rename board
|
2022-03-12 08:01:18 +09:00 |
MallikarjunSE
|
3fc302f7ad
|
AP_HAL_ChibiOS: Add Sierra-F9P support
|
2022-03-12 08:01:18 +09:00 |
Andy Piper
|
0297e2e313
|
AP_HAL_ChibiOS: normalize BeastH7v2 in line with BeastF7v2 definition
|
2022-03-12 08:01:18 +09:00 |
Evgeniy
|
c53837141f
|
AP_HAL_ChibiOS: BeastH7v2 board added
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
bffa7d9893
|
hwdef: fixed buzzer on CUAV_GPS peripheral
|
2022-03-12 08:01:18 +09:00 |
MallikarjunSE
|
2598257e76
|
hwdef: hwdef update with watchdog
|
2022-03-12 08:01:18 +09:00 |
MallikarjunSE
|
00a276df9c
|
hwdef:update storage pages and enable watchdog
|
2022-03-12 08:01:18 +09:00 |
murata
|
0893789863
|
hwdef: Set the maximum number of barometric pressure sensors to 1
|
2022-03-12 08:01:18 +09:00 |
murata
|
78c193bd1e
|
hwdef: Maximum number of battery monitors is 1
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
635e04567b
|
hwdef: enable GPS_MOVING_BASELINE on FreeflyRTK and f303-GPS
this allows for F9P based dual-GPS yaw on DroneCAN peripherals with
auto-config
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
feb34f3a0c
|
hwdef: added HolybroG4_GPS
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
3f1a138a73
|
HAL_ChibiOS: fixed min/max inversion in MCU voltage logging
|
2022-03-12 08:01:18 +09:00 |
Andy Piper
|
ce8e87bd29
|
AP_HAL: always choose high for dshot prescaler calculation
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
f8f15d9ff9
|
Plane: disallow mavlink disarm while flying
this relies on is_flying(), and we will need to watch for reports of
the heuristics failing
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
c9e2fe4e54
|
ArduPlane: tailsitter: keep attitude controll throttle level upto date for smoother controller handover
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
c8c3bcf8f3
|
Plane: never stick mix without valid RC input
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
4324db6580
|
Plane: don't prevent stick mixing in none RC failsafe
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
d21b684753
|
AP_PiccoloCAN: GPIO servo does not count as active
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
121080f77a
|
AP_Arming: don't arming check servo functions set to GPIO
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
a9f8e8144d
|
AP_Periph: fixed moving baseline yaw for single CAN peripherals
the AP_GPS_UAVCAN driver requires this param for auto-config of MB yaw
on DroneCAN GPS
|
2022-03-12 08:01:18 +09:00 |
Tom Pittenger
|
bf11e304f6
|
AP_Airspeed: improve description of ARSPD_TUBE_ORDR
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
7ced9b0d32
|
AP_Airspeed: rename get_health_failure_probability to get_health_probability
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
8a4f256ad5
|
AP_Airspeed: Health: use reading from correct airspeed sensor
|
2022-03-12 08:01:18 +09:00 |
Iampete1
|
2f3b1eac6d
|
AC_AttitudeControl: WeatherVane: defualt to 0 gain on plane and early return
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
82737dc863
|
AP_Scripting: fixed radius selection for ship landing
|
2022-03-12 08:01:18 +09:00 |
Andrew Tridgell
|
928f22cd15
|
Plane: use pos control for most of LAND_FINAL
this gives more accurate landing with some velocity drift
|
2022-03-12 08:01:18 +09:00 |