Commit Graph

133 Commits

Author SHA1 Message Date
Jason Short 782ebf5176 Arducopter:Log.pde Logging the calculated Climbrate 2012-07-10 21:53:38 -07:00
Jason Short 1070eea70b Log.pde: formatting 2012-07-03 17:16:26 -07:00
Andrew Tridgell 33440567e6 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
Jason Short 28829b0d60 Log.pde: removed nav_bearing reference and replaced with target_bearing ref 2012-06-25 23:06:28 -07:00
Jason Short c42f9ece43 Inertial Control
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
rmackay9 dcdeae412e ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives.
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
2012-06-03 16:58:19 +09:00
rmackay9 2a216ce900 ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx). 2012-06-02 12:51:12 +09:00
Andrew Tridgell 66544a5db2 Log: don't print '+' while erasing logs
we no longer do page based erase, so printing a + every 128 pages
makes no sense
2012-05-22 20:10:29 -07:00
Andrew Tridgell 422dc82f32 MAVLink: allow parameter fetch during mavlink_delay()
this allows the planner to fully connect to the APM with MAVLink while
doing a DataFlash erase
2012-05-22 16:13:35 +10:00
Jason Short 9c19138fb8 Log.pde : Updated Flash Logging to log Floats properly vs scaled integers. 2012-04-21 15:25:53 -07:00
Jason Short e22832a832 Added a union for casting floats to ints and back when storing Floats to the DataFlash 2012-04-21 15:17:09 -07:00
rmackay9 8402a3d837 ArduCopter - Log.pde - changed MOT output to dataflash to take values from AP_Motors class's motor_out array instead of the global motor_out array. 2012-04-04 22:53:21 +09:00
rmackay9 1f4cfb9333 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
Andrew Tridgell 547b4ed55b AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short 6201bdb8a7 ACM: Fixed comment 2012-03-16 14:10:19 -07:00
rmackay9 a869a01294 ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees 2012-03-12 12:09:04 +09:00
rmackay9 c7480f2281 ArduCopter - fix to dataflash logging of Mag heading 2012-03-11 01:27:29 +09:00
Jason Short 1e254cbca0 Compass heading added to ATT log 2012-02-24 12:11:15 -08:00
Andrew Tridgell 95ef9206dc DCM: renorm_sqrt_count is now called renorm_range_count 2012-02-23 08:16:08 +11:00
Andrew Tridgell a2d0900460 fixed warning in Log build 2012-02-13 16:22:52 +11:00
Andrew Tridgell f1a41b041f log: fixed some integer size errors
need to be careful with the types passed to printf()
2012-02-12 20:38:37 +11:00
Randy Mackay f1a129c8ea ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments 2012-02-05 16:56:51 +09:00
Jason Short 90099d4a42 ATT tuning update 2012-01-30 21:13:03 -08:00
Jason Short 7833cea9d4 2.2B6 - Please verify Heli still functions properly.
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Jason Short f638a4b81d recording nav_bearing rather than target bearing
recording x and y speed rather than Iterms for nav since they are always 0 now
2012-01-21 22:10:28 -08:00
Doug Weibel ed9f7cb1b6 Update battery monitoring code for ArduCopter
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Jason Short 84e001594d comma 2012-01-10 23:45:33 -08:00
Randy Mackay f68d23d91e ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Andrew Tridgell 92f9c0b648 ACM: fixed a signed/unsigned warning 2012-01-05 10:14:12 +11:00
Jason Short fe8c99c49b removed PM test field 1 - not needed 2012-01-04 09:28:37 -08:00
Jason Short 2c1fe93856 cosmetic 2011-12-29 23:02:03 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell 73e6d5ee11 ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Andrew Tridgell ab64a689c8 ACM-log: use DataFlash.df_NumLogs
this fixes the flash size on APM2
2011-12-26 19:17:11 +11:00
Randy Mackay c24b5229e1 AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Jason Short d9590a44d6 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short be4b031c7d added back in the Disabled log - gave up on Log Simple idea 2011-12-23 14:45:56 -08:00
Pat Hickey f1624621b3 ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
2011-12-19 21:04:51 -08:00
Andrew Tridgell ad9c0533d8 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short 8970948804 Sync logging 2011-12-16 22:02:41 -08:00
Doug Weibel 8b78c4a4c5 Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Jason Short f3e408e7e0 Added a simplified Log that is just GPS for my 1280 board 2011-12-12 17:47:45 -08:00
Jason Short 0289e35347 Ground course saved as long for SIM compat 2011-12-10 10:19:20 -08:00
Doug Weibel 502a98dda1 Add hook to dump log filesystem index for debugging 2011-12-07 08:13:30 -07:00
Doug Weibel 88ab4f7d70 Fix for intermittent bug of log #1 starting on page 2 and confusing file system 2011-11-28 19:43:10 -07:00
Doug Weibel b03de3095e Add DataFlash.Init before doing a forced log erase on eeprom reset.
Add progress indication during log erase
2011-11-28 19:42:27 -07:00
Jason Short 909e5796eb Logging input to find this freeze bug 2011-11-28 10:33:06 -08:00
Jason Short cc1593d16d made Logs dump with dump 0 or -1 2011-11-27 22:23:02 -08:00
Andrew Tridgell a048709828 Logs: don't print hundreds of bogus log boundaries
this can take quite a long time
2011-11-26 17:02:55 +11:00
Doug Weibel 9ecfac1156 Change ArduCopter DataFlash log file system to new file system which allows overwriting logs.
Also changed the feature to dump all DataFlash memory to occur when user requests dumping log "-1"
2011-11-25 07:17:15 -07:00
Jason Short 6d99e78887 removed unused function 2011-11-20 21:59:55 -08:00
Jason Short 5c797e91b5 Better function definition 2011-11-20 20:32:46 -08:00
Jason Short beeba99b92 Missed a function definition for no_logs option 2011-11-20 20:29:58 -08:00
Jason Short 56179a24e1 Added Arbitrary data logging 2011-11-19 16:59:54 -08:00
Jason Short 791fd194a4 added logging of raw baro 2011-11-19 11:08:13 -08:00
Jason Short 802dd6994a PM restored to normal output 2011-11-17 10:37:01 -08:00
Jason Short 7ebab2a9fe Log type error fix 2011-11-17 10:27:02 -08:00
Jason Short 2c9ebf11b8 removed unused functions, log fix 2011-11-09 23:28:50 -08:00
Jason Short 6e3b3fd974 CTUN log update 2011-11-09 12:28:12 -08:00
Andrew Tridgell 3b67321945 Log: try to fix -ve lat in logging 2011-11-09 08:46:05 +11:00
Jason Short c3d5d92a71 Updated Logs to be C++ compliant 2011-11-07 22:23:48 -08:00
Andrew Tridgell dc6fb484cd Log: fixed a few more casts 2011-11-08 11:59:30 +11:00
Andrew Tridgell 28634f51b7 ArduCopter: use specific sized data types in a lot of places
this will make the Desktop build more consistent with the real AVR
build, and also with a future ARM build
2011-11-08 11:05:36 +11:00
Andrew Tridgell 3176d4ffc5 HIL: enable CTUN log message in ATTITUDE HIL 2011-11-08 07:58:35 +11:00
Andrew Tridgell 92471aead2 Log: better way to check for -1 long portably 2011-11-08 07:58:34 +11:00
Andrew Tridgell 2bd451b445 Log: make find_last_log_page() portable
this makes it work with platforms with a larger 'long'
2011-11-07 23:50:49 +11:00
Andrew Tridgell ae1e1c940f Log: fixed a bug where we could index outside an array
when we first start up, num_existing_logs may be zero
2011-11-07 22:56:13 +11:00
Jason Short c8304114a3 renamed some command variables to align with Arduplane
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Jason Short c6ed8ed0ea alt hold logging 2011-11-01 09:28:04 -07:00
Jason Short 67e98ae867 Added additional NTUN logging entries. 2011-10-29 11:53:50 -07:00
Jason Short 1238944573 logging type change in CTUN 2011-10-28 21:59:47 -07:00
Jason Short 07daf34ccc Added a slew rate to the alt change rate.
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
2011-10-28 21:29:10 -07:00
Jason Short 46590e5f28 Log updates
Added motor logging for different frame types. Switched the PM log to some new debugging values and speed up the writing of the value to the logs.
2011-10-27 22:36:25 -07:00
Jason Short 2330006fbe logging for gyro and accell testing 2011-10-12 21:21:46 -07:00
Andrew Tridgell d89ae696ef merged the GCS updates from ArduPlane to ArduCopter
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
2011-10-11 20:53:43 +11:00
Jason Short 239164fa19 Fixed Flip code to compile. Flip still not flight tested! 2011-09-25 12:21:54 -07:00
rmackay9 c825e76a88 ArduCopter - small changes to fix compile errors when optical flow enabled 2011-09-17 22:09:18 +09:00
Jason Short 4607bdb4b5 fixed naming for opt flow 2011-09-16 19:26:17 -07:00
Jason Short 129c13e065 Fixed CIRCLE mode trig error
made loiter_radius * 100 in Params
updated gains
2011-09-16 16:54:45 -07:00
Jason Short d29cfbcee3 Integration of optical flow
bug fixes for new Simple mode
increased Baro filter by 2 fields
2011-09-15 23:33:00 -07:00
Jason Short 1ce2308d11 Removed Simple Mode
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
2011-09-14 13:58:18 -07:00
Jason Short 5f94aa1d40 removed Nav_bearing 2011-09-11 20:32:58 -07:00
Andrew Tridgell 1456a2a912 renamed top level directories
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00