rmackay9
441413f1c6
ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers.
2012-03-25 16:09:08 +09:00
Andrew Tridgell
690ad58a64
AHRS: adapt ArduCopter for new AHRS framework
2012-03-19 17:29:02 +11:00
Jason Short
d52b93849e
ACM: Fixed comment
2012-03-16 14:10:19 -07:00
rmackay9
7cf635889d
ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees
2012-03-12 12:09:04 +09:00
rmackay9
a72b20f42d
ArduCopter - fix to dataflash logging of Mag heading
2012-03-11 01:27:29 +09:00
Jason Short
ab945f36df
Compass heading added to ATT log
2012-02-24 12:11:15 -08:00
Andrew Tridgell
b231112957
DCM: renorm_sqrt_count is now called renorm_range_count
2012-02-23 08:16:08 +11:00
Andrew Tridgell
f363d0542c
fixed warning in Log build
2012-02-13 16:22:52 +11:00
Andrew Tridgell
2133b9fb08
log: fixed some integer size errors
...
need to be careful with the types passed to printf()
2012-02-12 20:38:37 +11:00
Randy Mackay
54fe857236
ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments
2012-02-05 16:56:51 +09:00
Jason Short
06d54bf0e8
ATT tuning update
2012-01-30 21:13:03 -08:00
Jason Short
0213f4dd88
2.2B6 - Please verify Heli still functions properly.
...
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Jason Short
8bd6cabdf1
recording nav_bearing rather than target bearing
...
recording x and y speed rather than Iterms for nav since they are always 0 now
2012-01-21 22:10:28 -08:00
Doug Weibel
2ea9db84e0
Update battery monitoring code for ArduCopter
...
Fixes compatibility for APM2. Also a significant update to the battery monitoring code: We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos. These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere). Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs. The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Jason Short
22ebe00773
comma
2012-01-10 23:45:33 -08:00
Randy Mackay
7b9701fdd5
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Andrew Tridgell
3c965ff1a2
ACM: fixed a signed/unsigned warning
2012-01-05 10:14:12 +11:00
Jason Short
6b3094e053
removed PM test field 1 - not needed
2012-01-04 09:28:37 -08:00
Jason Short
2f657ebdbf
cosmetic
2011-12-29 23:02:03 -08:00
Randy Mackay
ff66a3417c
OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
...
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell
ef1d8eaeac
ACM: update for DataFlash changes
2011-12-28 16:00:49 +11:00
Andrew Tridgell
cb48bfd054
ACM-log: use DataFlash.df_NumLogs
...
this fixes the flash size on APM2
2011-12-26 19:17:11 +11:00
Randy Mackay
c3ea1ca5dc
AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch
2011-12-25 12:33:06 +09:00
Jason Short
f2d6708058
Fixed merge issues
2011-12-23 14:51:40 -08:00
Jason Short
778c9cd1db
added back in the Disabled log - gave up on Log Simple idea
2011-12-23 14:45:56 -08:00
Pat Hickey
74530de4bb
ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added
...
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
2011-12-19 21:04:51 -08:00
Andrew Tridgell
1807585b98
ACM: run mavlink loop while erasing logs
2011-12-18 10:19:41 +11:00
Jason Short
35f0d31b9d
Sync logging
2011-12-16 22:02:41 -08:00
Doug Weibel
2687f1c77d
Changes to logging file system to avoid problems with 0 and 1 page logs
2011-12-13 20:09:07 -07:00
Jason Short
a386ea5e06
Added a simplified Log that is just GPS for my 1280 board
2011-12-12 17:47:45 -08:00
Jason Short
34213e745c
Ground course saved as long for SIM compat
2011-12-10 10:19:20 -08:00
Doug Weibel
4f6f9a6be4
Add hook to dump log filesystem index for debugging
2011-12-07 08:13:30 -07:00
Doug Weibel
b3b218fa40
Fix for intermittent bug of log #1 starting on page 2 and confusing file system
2011-11-28 19:43:10 -07:00
Doug Weibel
aa6c336479
Add DataFlash.Init before doing a forced log erase on eeprom reset.
...
Add progress indication during log erase
2011-11-28 19:42:27 -07:00
Jason Short
8e582b4169
Logging input to find this freeze bug
2011-11-28 10:33:06 -08:00
Jason Short
ab183e54a0
made Logs dump with dump 0 or -1
2011-11-27 22:23:02 -08:00
Andrew Tridgell
fb21e619fe
Logs: don't print hundreds of bogus log boundaries
...
this can take quite a long time
2011-11-26 17:02:55 +11:00
Doug Weibel
0d62fbd197
Change ArduCopter DataFlash log file system to new file system which allows overwriting logs.
...
Also changed the feature to dump all DataFlash memory to occur when user requests dumping log "-1"
2011-11-25 07:17:15 -07:00
Jason Short
ad813059bb
removed unused function
2011-11-20 21:59:55 -08:00
Jason Short
023034e9f5
Better function definition
2011-11-20 20:32:46 -08:00
Jason Short
d900449013
Missed a function definition for no_logs option
2011-11-20 20:29:58 -08:00
Jason Short
5c762272df
Added Arbitrary data logging
2011-11-19 16:59:54 -08:00
Jason Short
cac33f474f
added logging of raw baro
2011-11-19 11:08:13 -08:00
Jason Short
366806359d
PM restored to normal output
2011-11-17 10:37:01 -08:00
Jason Short
8d6701f072
Log type error fix
2011-11-17 10:27:02 -08:00
Jason Short
0cee7f0525
removed unused functions, log fix
2011-11-09 23:28:50 -08:00
Jason Short
a26758203f
CTUN log update
2011-11-09 12:28:12 -08:00
Andrew Tridgell
7b175618fc
Log: try to fix -ve lat in logging
2011-11-09 08:46:05 +11:00
Jason Short
f80a08bf57
Updated Logs to be C++ compliant
2011-11-07 22:23:48 -08:00
Andrew Tridgell
2186a5978a
Log: fixed a few more casts
2011-11-08 11:59:30 +11:00