Andrew Tridgell
89cb3fbd61
HAL_PX4: fixed blocking IO in UART driver
2013-01-22 21:52:21 +11:00
Andrew Tridgell
6ffa18fa61
HAL_PX4: rewrite UART driver to be much more efficient
...
this does the IO in the timer thread, and uses buffers in the main
task to avoid system call costs in the flight code.
The cost of PX4 read and write system calls is quite high - about 10
to 15 usec. We can't afford to pay that per byte
2013-01-22 21:22:01 +11:00
Andrew Tridgell
546ed19ffc
HAL_PX4: improved efficiency of serial writes
...
use buffer at a time writes when possible, and use O_NONBLOCKING to
avoid txspace()
2013-01-22 10:50:26 +11:00
Andrew Tridgell
18cfd29f2f
HAL_PX4: added a read buffer to the UART driver
...
this lowers the average cost of reading bytes by a large amount, and
prevents the GPS driver from chewing lots of time.
2013-01-22 10:34:04 +11:00
Andrew Tridgell
db0bd86317
HAL_PX4: name the eeprom file after the sketch
...
this makes it easier to switch between ArduPlane and ArduCopter
2013-01-21 22:04:17 +11:00
Andrew Tridgell
1188c9e335
HAL_PX4: added Util instance
...
this fixes hal.util->vsnprintf_P()
2013-01-21 17:10:42 +11:00
Andrew Tridgell
52f560a4c2
HAL_PX4: enabled AnalogIn driver
2013-01-21 13:56:57 +11:00
Andrew Tridgell
ed94292c25
HAL_PX4: start adc driver in rc.APM
2013-01-21 13:55:58 +11:00
Andrew Tridgell
e42cf918fd
HAL_PX4: added AnalogIn driver
...
this allows airspeed to work on a PX4
2013-01-21 13:55:06 +11:00
Andrew Tridgell
39e28d48c2
HAL_PX4: switched scheduler to use a pthread
...
this allows the timer tasks to access file descriptors in the main APM
task, which makes writing PX4 device drivers much easier
2013-01-21 13:54:09 +11:00
Andrew Tridgell
ffb2924dd4
HAL_PX4: added APM startup script
2013-01-21 08:27:02 +11:00
Andrew Tridgell
0655b1a925
HAL_PX4: fixed thread_running on failed startup
2013-01-20 22:13:20 +11:00
Andrew Tridgell
76092eb590
AP_HAL: remove unused peek() interface from UART drivers
...
this is a bit tricky to implement on some platforms, and is unused
anyway
2013-01-16 14:43:18 +11:00
Andrew Tridgell
bd9c61562f
HAL_PX4: added -d command line option to app
...
allows control of serial device
2013-01-14 16:21:27 +11:00
Andrew Tridgell
64a8a8e4c9
HAL_PX4: fixed using mavlink on the console
...
this disables the ONLCR termios flag, which was injecting extra
carriage returns in the output
2013-01-14 16:21:27 +11:00
Andrew Tridgell
7c7a215934
HAL_PX4: fixes for new Scheduler API
2013-01-11 12:25:26 +11:00
Andrew Tridgell
5ac23d358f
HAL_PX4: update for new i2cdriver interface
2013-01-07 11:05:30 +11:00
Andrew Tridgell
319e1a4e84
HAL_PX4: support setting servo rate
2013-01-07 11:05:30 +11:00
Andrew Tridgell
30447018d5
HAL_PX4: handle %S in format strings
2013-01-05 08:10:07 +11:00
Andrew Tridgell
08d518e07f
HAL_PX4: switch to libc vdprintf()
...
vdprintf has now been added to NuttX
2013-01-05 08:01:10 +11:00
Andrew Tridgell
84bd10d279
HAL_PX4: minor cleanups
2013-01-04 22:27:04 +11:00
Andrew Tridgell
5829d44a22
HAL_PX4: disable failsafe handler
...
this won't work until we can set RC output values in timers
2013-01-04 22:26:16 +11:00
Andrew Tridgell
0fcc6d7389
HAL_PX4: added an RC Output driver
2013-01-04 22:25:36 +11:00
Andrew Tridgell
44837a11f2
HAL_PX4: added baudrate support to UART driver
2013-01-04 19:42:30 +11:00
Andrew Tridgell
965fc8a9d1
HAL_PX4: enable uartB as GPS port
2013-01-04 19:41:50 +11:00
Andrew Tridgell
9f423a24ad
HAL_PX4: yield CPU in delay()
...
this allows other apps to run
2013-01-04 12:34:35 +11:00
Andrew Tridgell
155fca8a4b
HAL_PX4: make APM sketches into daemons
...
this also moves uartA onto UART5, allowing ttyS0 for nsh
2013-01-04 11:14:35 +11:00
Andrew Tridgell
1fc95a2d45
HAL_PX4: support PPM RC Input
...
HIL flying now works properly
2013-01-04 08:31:23 +11:00
Andrew Tridgell
38bccee230
HAL_PX4: initial RCInput driver (overrides only)
2013-01-03 21:30:35 +11:00
Andrew Tridgell
d492b72a2c
HAL_PX4: use /dev/ttyS0 for uartA
...
this also changes txspace and available to use FIONWRITE and FIONREAD
2013-01-03 21:12:10 +11:00
Andrew Tridgell
1e69b88261
HAL_PX4: use write() in panic()
...
this allows panic from the UARTDriver
2013-01-03 21:11:37 +11:00
Andrew Tridgell
ac7117245a
HAL_PX4: added a storage driver
...
stores 'eeprom' to a sdcard file
2013-01-03 19:35:05 +11:00
Andrew Tridgell
b30fa6535b
HAL_PX4: support reboot
2013-01-03 19:34:36 +11:00
Andrew Tridgell
c6c336a6e8
HAL_PX4: implement peek() and available()
...
keep a 1 byte buffer
2013-01-03 17:27:53 +11:00
Andrew Tridgell
cc7f4353b4
HAL_PX4: update simple example
2013-01-03 13:17:32 +11:00
Andrew Tridgell
b0f1ceb76b
HAL_PX4: removed some files not needed any more
2013-01-03 13:17:11 +11:00
Andrew Tridgell
d9d5eb52bf
HAL_PX4: use fd IO instead of stdio
...
this allows for hal console output from within timers, which is very
handy for debugging
2013-01-03 13:16:41 +11:00
Andrew Tridgell
c6305b5876
HAL_PX4: rework Scheduler using hrt calls
...
thanks to Julian Oes for the suggestion
2013-01-03 13:15:57 +11:00
Andrew Tridgell
9373a4e5b3
HAL_PX4: added a uartA driver
...
uses stdin/stdout for IO
2013-01-03 11:03:05 +11:00
Andrew Tridgell
5053fb8acc
HAL_PX4: implement atomic operations
2013-01-02 21:45:17 +11:00
Andrew Tridgell
5a70f3becf
HAL_PX4: added a scheduler implementation
2013-01-02 21:39:26 +11:00
Andrew Tridgell
374af1cd14
build: change from Arduino.mk to apm.mk
2013-01-02 17:29:37 +11:00
Andrew Tridgell
da10e68e87
HAL_PX4: added basic console driver (output only)
2013-01-01 18:19:18 +11:00
Andrew Tridgell
b41440175f
HAL_PX4: started on new PX4 HAL structures
2012-12-30 20:02:45 +11:00
Andrew Tridgell
feb11f0bc9
PX4: mark example as nobuild for now
2012-12-22 14:40:10 +11:00
Pat Hickey
eb530b86e8
move Arduino.mk to /mk/Arduino.mk
2012-12-20 14:52:35 +11:00
Andrew Tridgell
7d27e420ae
AP_HAL: remove unnecessary Arduino.h includes
2012-12-20 14:52:30 +11:00
Andrew Tridgell
c4d9b5e328
AP_HAL_PX4: added stdio.h
2012-12-20 14:51:29 +11:00
Andrew Tridgell
2669c33476
AP_HAL_PX4: added main program as include
2012-12-20 14:51:29 +11:00
Pat Hickey
be00b2f681
AP_HAL_PX4: brief disclaimer
2012-12-20 14:51:28 +11:00
Pat Hickey
64a79f3598
AP_HAL_PX4: Stub Console implemented
2012-12-20 14:51:28 +11:00
Pat Hickey
2d363e0683
AP_HAL_PX4: trivial console header
2012-12-20 14:51:28 +11:00
Andrew Tridgell
471d672e54
examples: mark some examples as unable to build
...
some are not worth fixing. Some can't build on 1280/2560
2012-11-24 21:09:55 +11:00