Commit Graph

350 Commits

Author SHA1 Message Date
Tom Pittenger ade6281923 Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter 2019-04-03 17:46:50 -07:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Mark Whitehorn e0765747e7 Plane: add new tailsitter bodyframe roll option 2019-03-26 14:50:37 +11:00
Mark Whitehorn 825055d736 Plane: add rate-only option for QACRO mode 2019-03-19 10:13:59 +11:00
Mark Whitehorn 6414f0e48e Plane: skip plane assignments in QACRO 2019-03-19 10:13:59 +11:00
Andrew Tridgell 2b6210d594 Plane: use WP height for height above ground in vtol landing
this allows for landings above or below the takeoff height without
requiring the use of terrain data. It allows both the use of vfwd
motor for holding against wind, and the correct height for land final
descent rate
2019-03-18 14:47:27 +11:00
Andrew Tridgell b4103d04cc Plane: never use vfwd motor if vtol motors shutdown 2019-03-18 13:38:41 +11:00
Andrew Tridgell 7908ad437e Plane: allow fwd motor to run in VTOL land hor positioning
this fixes an issue with vtol landings below the takeoff point
2019-03-18 13:38:41 +11:00
Peter Barker ca7566fff9 Plane: use enum class for ArmingMethod and ArmingRequired 2019-03-12 19:48:14 +11:00
Peter Barker cbb0bfb809 Plane: is_flying_vtol: if spool mode is shut down we are not flying
The subsequent check for get_throttle passes if you switch from QHOVER
to MANUAL on the ground while armed.  get_throttle returns > 0.01 - but
the motors are shut down so no output occurs.
2019-03-12 10:21:11 +11:00
Mark Whitehorn 4a6b97828f ArduPlane: add tailsitter input type TAILSITTER_INPUT_BF_ROLL 2019-03-06 15:48:51 +11:00
Mark Whitehorn 01d6f1d932 ArduPlane: add body-frame yaw mode for tailsitters 2019-03-06 15:48:51 +11:00
Mark Whitehorn 6e4a2b97f9 ArduPlane:add subclass for copter tailsitters
cleanup and add tailsit_motmx
add constexpr and motor mask check
add support for tricopter tailsitter
don't call output_motor_mask unless armed
fix whitespace
2019-03-06 07:53:46 +09:00
Mark Whitehorn 487ad7a90f Plane: add QACRO mode for quadplanes
use acro_r/p/y_rate params in qacro
port ACRO throttle handling from copter

handle non-tailsitter controls
2019-03-05 10:13:20 +11:00
IamPete1 f24c6785f2 Plane: add E-stop 2019-02-27 08:51:24 +09:00
Andrew Tridgell 136e10a781 Plane: handle VTOL landing with incorrect height
if landing above expected height then run landing detector to allow a
switch from LAND_DESCEND to LAND_FINAL

this prevents the plane sitting on the ground until the battery runs
out
2019-02-26 11:12:58 +11:00
Michael du Breuil b290148ed0 Plane: Don't overwrite the quadplane loiter relax 2019-02-23 11:08:21 +11:00
Michael du Breuil c15983c690 Plane: prevent loss of control when Q_ENABLE is set while flying
Also rename check_throttle_suppression
2019-02-21 21:38:03 -07:00
Michael du Breuil 25a2c77782 Plane: Fix not logging quadplane control, and over logging attitude control 2019-02-22 11:59:26 +11:00
Mark Whitehorn 95b3a5bacd ArduPlane: implement hover throttle learning for quadplanes
disable by default
check quadplane.enable in update_hover_learn
2019-02-16 19:04:13 -08:00
Mark Whitehorn b9f3118374 Plane: allow changing Q_TRIM_PITCH in flight
change float comparison to is_equal
2019-02-12 09:42:19 +11:00
Michael du Breuil df1632054e Plane: Update throttle mix 2019-02-05 11:05:54 +11:00
Andrew Tridgell 28cf9d2f24 Plane: allow rudder at zero throttle
if rudder disarming is disabled
2019-02-03 05:02:07 -08:00
Randy Mackay 4d5e13f1d4 Plane: : integrate AC_WPNav::get_speed rename to get_default_speed 2019-01-31 19:34:32 +09:00
Mark Whitehorn 5c81a78c9c Plane: tailsitter forward transition bugfix 2019-01-22 12:55:47 +11:00
Peter Barker 40856fef56 Plane: remove vestiges of old PX4_MIXER code 2019-01-19 19:31:03 +11:00
Peter Barker 6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Randy Mackay 2650b1fe93 Plane: desired-ground-idle replaces spin-when-armed 2019-01-15 11:41:44 +09:00
Andrew Tridgell f35cebcca4 Plane: fixed EKF yaw reset
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective

thanks to Leonard for noticing the bug!
2019-01-14 08:32:17 +11:00
Andrew Tridgell 53a1d98b68 Plane: fixed VTOL takeoff to ignore lat/lon in mission
we should always takeoff vertically
2019-01-11 13:48:45 +11:00
Michael du Breuil d6cac4b52a Plane: Add a failure timer for quadplane forward transitions
Falls over to QLAND if we fail to transition
2019-01-08 10:52:12 +11:00
IamPete1 9c2db806f3 Plane: add units to Q_VFWD_ALT 2018-12-28 16:15:41 +11:00
Andrew Tridgell 9117dcc54b Plane: don't log QTUN when VTOL not active 2018-12-21 22:17:52 +11:00
Andrew Tridgell d3afc9424a Plane: make QTUN logging match copter logging 2018-12-21 22:17:52 +11:00
Andrew Tridgell 1013eddfce Plane: use AHRS_View for RATE logging 2018-12-21 22:17:52 +11:00
Randy Mackay a96c1566ec Plane: fix quadplane pos control param docs 2018-12-18 12:01:07 +00:00
Michael du Breuil 1a45755ffd Plane: Support a different landing radius for quadplane fw approach 2018-12-18 10:11:22 +11:00
Nikhil Upadhye d1e93bae83 Plane: adding new mode QAUTOTUNE
copter like autotune support for quadplanes and tailsitter in VTOL mode.

cleanup
2018-12-14 16:33:11 +11:00
Randy Mackay 71708ee4ea Plane: quadplane uses set_defaults_from_table 2018-12-06 12:23:41 +09:00
IamPete1 c6e70c0454 Plane: add roll limit for tailsitters
Quadplane: add tailsitter pitch params
2018-12-01 09:40:07 +11:00
Andrew Tridgell b6519c88a5 Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
2018-11-30 18:17:42 +11:00
Leonard Hall 0943ace7a9 Plane: Zero Yaw correction during transition
and relax attitude controller when not using lift motors.
2018-11-30 18:16:29 +11:00
Andrew Tridgell c081ce9adb Plane: don't relax attitude controllers for tailsitters
this fixes an issue with testing control movement when disarmed
2018-11-30 13:01:53 +11:00
Andrew Tridgell da69bf3391 Plane: added an abstraction for reverse thrust
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Andrew Tridgell c59b2c156a Plane: fixes for Q_TRIM_PITCH
improved documentation and variable names
2018-11-12 17:05:04 +11:00
IamPete1 5a7bd61e8c Quadplane: add trim params 2018-11-12 17:05:04 +11:00
Michael du Breuil 8e906e0ba0 Plane: Add support for a loiter to alt approach to VTOL landing 2018-11-10 18:58:54 +11:00
Peter Barker 4e3e39a3e8 Plane: make libraries get EKF control limits themselves 2018-10-09 10:47:38 +11:00
Michael du Breuil 02d37d43d2 Plane: Disallow climbs during TRANSITION_AIRSPEED_WAIT 2018-10-02 09:35:47 +10:00
Michael du Breuil b2ef6b901e Plane: Cope with AC_PosControl renaming 2018-09-20 15:15:45 -07:00
Michael du Breuil b6efc8a20b Plane: reduce some copy pasted code 2018-09-20 13:47:21 -07:00
Leonard Hall 13c27e0eb8 Plane: Missing Loiter Init on accel 2018-09-19 17:29:55 +09:00
Andrew Tridgell 5136b90d27 Plane: do attitude relax after 100ms 2018-09-15 11:00:29 +10:00
Leonard Hall 7372a7b5f9 QuadPlane: Remove repeat I term reset 2018-09-15 11:00:29 +10:00
Andrew Tridgell ef154cf3fa Plane: fixed relaxing of attitude controller on transition
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
2018-09-15 11:00:29 +10:00
Michael du Breuil f9e56f9d12 Plane: Respect frame type on VTOL_TAKEOFF commands
allow missioncommands to fail to start
2018-09-11 06:42:00 +10:00
Michael du Breuil 925d76bb8c Plane: Small cleanup to quadplane const (and clarity) 2018-09-04 15:11:41 +10:00
Leonard Hall e11c7c6069 QuadPlane: remove true from init of loiter 2018-09-04 13:37:28 +09:00
Michael du Breuil 3d923d0572 Plane: Send a quadplane version of NAV_CONTROLLER_OUTPUT 2018-08-07 09:49:01 +10:00
Andrew Tridgell 16c7ab81dc Plane: pass rc_speed to motor backend constructors
this sets the right speed as early as possible
2018-07-28 15:25:57 +10:00
IamPete1 20c67019b0 Plane: added Q_TAILSIT_THSCMX
this provides more flexibility in tailsitter throttle scaling
2018-07-19 09:48:25 +10:00
Andrew Tridgell d8a7618e15 Plane: update use of AC_Loiter controller for quadplane
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.

The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.

This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
2018-06-11 08:40:58 +09:00
Andrew Tridgell d07f8aa42b Plane: fixed a bug in transition to QSTABILIZE for tailsitters
this bug was found bug Marco on his tailsitter. It resulted in zero
throttle for 2s in transition from FBWA to QSTABILIZE
2018-04-25 18:01:12 +10:00
Randy Mackay 840a6e4147 Plane: quadplane uses AC_Loiter
includes param conversion
2018-04-04 10:45:10 +09:00
Peter Barker f6a185a3c3 Plane: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Randy Mackay 548a7f8fcf Plane: add minor comment to quadplane 2018-03-16 13:50:57 +09:00
Leonard Hall ee745d2cd2 Plane: quad plane uses rate-control control during transitions 2018-03-16 13:50:57 +09:00
Leonard Hall a16d4ddad7 Plane: quadplane uses poscontrol instead of loiter 2018-03-16 13:50:57 +09:00
Randy Mackay c5d838125b Plane: quadplane logs PSC message 2018-03-16 13:50:57 +09:00
Randy Mackay 09cad7c59d Plane: quadplane integrates attitude control inertial_frame_reset 2018-03-16 13:50:57 +09:00
Randy Mackay 03c162432e Plane: quadplane provides dt to AC_WPNav::set_pilot_desired_acceleration 2018-03-16 13:50:57 +09:00
Randy Mackay a0a9a68fbc Plane: quadplane smoothing gain replaced by Q_A_INPUT_TC
Q_A_INPUT_TC parameter allows this to be tuned and a single value (which defaults to a value between the two previously used values) is used for all modes
2018-03-16 13:50:57 +09:00
Leonard Hall aa47b19dea Plane: remove quadplane calls to multicopter poscontrol's freeze_ff_xy 2018-03-16 13:50:57 +09:00
Randy Mackay ddcd08d6b6 Plane: PSC_ACCZ param name shortened 2018-01-31 08:48:21 +09:00
Michael du Breuil aec7521da4 Plane: Fix truncation of a time interval
Truncating the a millisecond time delta to uint16_t causes it to wrap
every 65 seconds, which could momentarily reset the desired climb rate
2018-01-25 14:30:49 +11:00
Randy Mackay d579e086cf Plane: quadplane param index comment for moved PIDs 2018-01-24 21:14:53 +09:00
Andrew Tridgell 20b05e4228 Plane: added conversion code for PID layout change
this copes with the move of multicopter PIDs inside the position
controller
2018-01-24 18:23:59 +11:00
Randy Mackay 7b1157e2d8 Plane: remove setting accel_z PID controller's dt
This is handled within pos-controller's set_dt function
2018-01-23 12:00:43 +09:00
Randy Mackay f41f4dc6e5 Plane: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay 017e71a748 Plane: quadplane velocity pi moves to position control library 2018-01-23 12:00:43 +09:00
luweikxy 25224cd261 Plane: remove dead code from do_vtol_land 2017-12-14 20:52:18 +09:00
Andrew Tridgell f7a735b990 Plane: fixed transitions for tailsitters after auto-takeoff
need to use angle wait
2017-11-19 16:06:02 +11:00
Andrew Tridgell 957c1f6d23 Plane: extend QLOITER transition pitch limit
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
2017-11-05 21:35:32 +11:00
Andrew Tridgell 9c8cd6c1cc Plane: added Q_TRANS_DECEL
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Andrew Tridgell e27c54a312 Plane: smooth out fwd tailsitter transition
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
2017-11-05 17:25:00 +11:00
Michael du Breuil d52f5155f0 Plane: Rename rc failsafe state members 2017-11-02 16:46:08 -07:00
nick2204 7d91755bd1 Plane: update Q_OPTIONS docs
Made q_options description a little clearer
2017-11-01 09:38:42 +11:00
Andrew Tridgell 1085069851 Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL 2017-10-30 16:52:19 +11:00
Andrew Tridgell 552faa8f67 Plane: smoother tailsitter transitions
this smooths out tailsitter transitions in both directions, adding a
new FW to VTOL transition state
2017-10-30 16:30:38 +11:00
Andrew Tridgell af893ddde7 Plane: implement Q_OPTIONS
this allows for NAV_TAKEOFF to be treated as NAV_VTOL_TAKEOFF in
quadplanes, and for level flight to be maintained during quadplane
transitions
2017-10-30 16:30:10 +11:00
Andrew Tridgell 02f8d888c3 Plane: relax controllers when disarmed
this prevents any remaining integrator from a previous flight stage from
affecting flight across a disarm
2017-10-30 16:30:10 +11:00
Andrew Tridgell 92ee05b925 Plane: fixed motor channel handling 2017-10-25 11:39:11 +11:00
Andrew Tridgell 6526ff504d Plane: fix for changes to AP_Motors API 2017-10-22 15:52:50 +11:00
Andrew Tridgell e008559b6e Plane: support LOITER_TO_ALT in quadplanes 2017-10-21 18:50:01 +11:00
Andrew Tridgell 8178ab4037 Plane: make mav_type in HEARTBEAT configurable
needed for qgc to setup for quadplanes
2017-10-20 15:41:06 +11:00
Andrew Tridgell 0aed5a9a57 Plane: prevent controller windup on ground
when on the ground in an auto-throttle mode lik FBWB or CRUISE, we may
have the throttle suppressed. In that case we should not run the
multicopter controller on quadplanes, or it may build up control which
will then apply on takeoff. This is particularly severe for aircraft
that are not level on the ground, such as taildragger quadplanes

Fixes https://discuss.ardupilot.org/t/quadplane-flips-on-takeoff/22095

many thanks to Sriram for reporting
2017-10-20 15:41:04 +11:00
Andrew Tridgell 1a95dcbdd7 Plane: update docs for Q_YAW_RATE_MAX 2017-10-20 15:40:58 +11:00
Andrew Tridgell f5b4d8d99c Plane: added frame type 11 for FlreFlyY6 2017-10-06 11:36:34 +11:00
Ferruccio Vicari 85ab3edc5f Plane: Smoother transition to QLOITER and QLAND
Use estimated stopping position
2017-09-21 07:57:38 +10:00