Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
48,422 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

379 Commits

Author SHA1 Message Date
Andrew Tridgell ee24310a95 AP_InertialSensor: fixed locking issue in delta accumulation 
this fixes a bug in calculating delta velocity and delta acceleration
between threads.
 2021-09-10 09:12:34 +10:00
Pierre Kancir 73efa895e2 AP_InertialSensor: fix externalAHRS detection 
'A = B >= C' kind. The expression is calculated as following: 'A = (B >= C)'
 2021-08-28 12:50:32 +10:00
Peter Barker 131bec811a AP_InertialSensor: remove @Values from param metadata where @Bitmask exists 2021-07-04 08:19:10 +10:00
Peter Barker fd8eb3c6c0 AP_InertialSensor: remove HIL support 2021-07-04 08:19:10 +10:00
Andrew Tridgell b3ed4f4b12 AP_InertialSensor: fixed handling of more than 3 accel/gyro instances 
allows for first 3 to work without a panic
 2021-04-13 09:36:52 +10:00
Andrew Tridgell dcf6bcea6e AP_InertialSensor: removed assert calls 
these waste flash space and do not do us any good
 2021-03-25 14:03:40 +11:00
Peter Barker 2b0bf45891 AP_InertialSensor: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Andrew Tridgell 25dd08a1fd AP_InertialSensor: added force_save_calibration() 2021-02-15 07:24:40 +11:00
Andrew Tridgell 2843cfa42d AP_InertialSensor: use mavlink statustext for cal info 2021-01-25 16:24:50 +11:00
Andrew Tridgell b542f947f7 AP_InertialSensor: don't mark accels as calibrating during trim 
we need the accels with offsets applied when doing accel trim
 2021-01-25 16:24:50 +11:00
Andrew Tridgell 3ff71c7814 AP_InertialSensor: changes from review feedback 2021-01-21 13:09:21 +11:00
Andrew Tridgell ffe20f7958 AP_InertialSensor: use a fixed reference temperature of 35C 
this allows us to timeout the calibration when the temperature stops
rising as the polynomial no longer depends on the maximum temperature
 2021-01-21 13:09:21 +11:00
Andrew Tridgell dc58b0b950 AP_InertialSensor: changes from review feedback 
thanks Sid!
 2021-01-21 13:09:21 +11:00
Andrew Tridgell c9a83c8127 AP_InertialSensor: added INS_TCAL_OPTIONS 
make persistent params optional, and allow save of accelcal
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 8caea96ab1 AP_InertialSensor: start auto-learning at boot 
This makes it easier to setup the params. The ENABLE=2 value only
takes effect at boot
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 7cb7ad3636 AP_InertialSensor: fixed build error 2021-01-21 13:09:21 +11:00
Andrew Tridgell 3fb720354d AP_InertialSensor: added notify events for temperature calibration 2021-01-21 13:09:21 +11:00
Andrew Tridgell 7921e042f1 AP_InertialSensor: added IMU temperature calibration support 
this adds parameters that can be setup by an external script for
compensating for temperature variation in gyros and accels using a 3rd
order polynomial
 2021-01-21 13:09:21 +11:00
Peter Barker 239b09fb34 AP_InertialSensor: add simulator for ICM40609 2021-01-12 17:43:36 +11:00
Andrew Tridgell 957842f7eb AP_InertialSensor: added support for v3 Invensense sensors 
starting with ICM-40609, ICM-42688 and ICM-42605
 2021-01-11 14:43:35 +11:00
Andrew Tridgell b74e5c0e2f AP_InertialSensor: added ExternalAHRS backend 2021-01-05 21:13:12 +11:00
Andrew Tridgell 4f176c25de AP_InertialSensor: relax IMU wait time for low loop rates 
allow for waiting for all IMUs for up to 1/3 of the loop time
 2021-01-05 21:13:12 +11:00
Andrew Tridgell f6c45c3bcd AP_InertialSensor: cope with INS_MAX_INSTANCES < 3 2020-11-10 16:15:45 +11:00
Peter Barker 02c9aa2ae2 AP_InertialSensor: remove unused define 2020-10-20 11:24:34 +11:00
Andrew Tridgell d5c0522651 AP_InertialSensor: instantiate SIM_IMU_COUNT sensors in SITL 2020-08-28 10:17:00 +10:00
Andy Piper d4ba821297 AP_InertialSensor: make the backend fast gyro rate configurable and independent from the accel rate 
allow fast sampling of gyros on MPU6000 and MPU6500
 2020-07-28 20:47:16 +10:00
Andy Piper 05366e9aa9 AP_InertialSensor: delegate active harmonic calculation to the filter 2020-07-14 09:50:06 +10:00
Andy Piper faf9bbbf3a AP_InertialSensor: make the backend fast gyro rate configurable 
raise gyro rate default on F7 and H7
clean up gyro rate docs and output startup banner
 2020-07-10 16:45:29 +10:00
Andy Piper 61bb42cc0c AP_InertialSensor: allow up to four distinct notch center frequencies to be updated 
apply the LPF after the notch filters to reduced notch-induced noise
 2020-06-21 19:09:35 +10:00
Andy Piper 8ac79da643 AP_InertialSensor: FFT gyro window would overflow on windows >= 256 
convert FFT buffers to ObjectBuffer<float> for lock-free access
push gyro samples directly into the FFT ring buffer from the gyro thread
 2020-05-24 07:43:34 +10:00
Andy Piper d0a241597a AP_InertialSensor: add support for double harmonic notches to more effectively target wider noise peaks 2020-04-28 09:32:02 +10:00
Peter Barker efbf929bc0 AP_InertialSensor: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Andrew Tridgell d772289b0d AP_InertialSensor: added driver for ADIS16470 2020-04-13 11:57:04 +10:00
Andy Piper 0e9b2a26c5 AP_InertialSensor: SITL the raw sample rate is not the same as the sensor rate 
use regulated time for frequency noise to avoid spurious harmonics
SITL sensors must be true separate instances
don't compile in FFT structures if DSP disabled
 2020-02-22 11:15:37 +11:00
Andy Piper 3d9776dd6d AP_InertialSensor: expose statically filtered gyro values for FFT analysis and allow sampling to gyro window for FFT analysis. 
FFT windows can be dynamically allocated
add harmonic notch dynamic tracking mode
unwind gyro window allocation in the case of failure
allow access to harmonic notch harmonics
 2020-02-22 11:15:37 +11:00
Peter Barker ab7ee46423 AP_InertialSensor: mark some parameters as Calibration parameters 2020-02-04 20:29:09 +11:00
Randy Mackay b7f6f4a05e AP_InertialSensor: reduce POS param range to 5m and add increment 2020-02-01 08:46:03 +09:00
Andrew Tridgell e52a3b9978 AP_InertialSensor: default fast sampling on 
if we have a first IMU capable of fast sampling then we want it
enabled by default
 2019-12-23 09:55:07 +11:00
Mark Whitehorn 00948c33d5 AP_InertialSensor: rename sensor_config_error to config_error 2019-11-08 10:14:34 +11:00
Andy Piper a9a7fe3ea5 AP_InertialSensor: ensure harmonic notch gets appropriate defaults 2019-09-11 18:41:05 +10:00
Andy Piper 3261677e01 AP_InertialSensor: remove _ prefix from methods. use changed filter methods. 2019-09-11 18:41:05 +10:00
Andy Piper 50f7e50634 AP_InertialSensor: add harmonic notch filter to gyro filter chain 
Allow dynamic updates to the calculated frequency. Convert bandwidth and frequency to floats.
backend variables do not need to be indexed per-backed
 2019-09-11 18:41:05 +10:00
Andy Piper dde6dec145 AP_InertialSensor: correct reboot documentation for batch logger and filters 2019-09-10 20:29:56 +10:00
Andrew Tridgell 15e15e0b9d AP_InertialSensor: define GET_I2C_DEVICE() 2019-09-04 16:27:47 +10:00
Andrew Tridgell 1c92ecc89f AP_InertialSensor: removed old method of specifying most IMUs 
and removed dangerous default values for rotations
 2019-08-28 06:54:11 +10:00
Andrew Tridgell c99923d500 AP_InertialSensor: require gyro orientations in LSM9DS probe 
this prevents a bug where they are missing in hwdef.dat
 2019-08-27 19:29:37 +10:00
Andrew Tridgell 992016069a AP_InertialSensor: fixed watchdog on AHRS trim gyro wait 2019-08-19 14:37:46 +10:00
Andrew Tridgell e1ce735886 AP_InertialSensor: special check for CubeBlack to force INS_USE3=1 
this will cope with users loading old parameter files
 2019-07-31 12:53:57 +10:00
Andrew Tridgell 123800ccd2 AP_InertialSensor: default INS_USE3 to 1 2019-07-31 12:53:57 +10:00
Andrew Tridgell 8e5c0fa32b AP_InertialSensor: disable kill IMUs with HAL_MINIMIZE_FEATURES 2019-07-07 19:03:01 +10:00