Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
3,050 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

3050 Commits

Author SHA1 Message Date
Michael Oborne 5cbecce8a1 APM Planner 1.1.21 
fixup config highlighting
mod log scanning
increase calibation timeout
add tcp console port 2300
add arduinoCPP - test
 2012-01-15 17:00:50 +08:00
Michael Oborne af21f6b2dd firmware build 2012-01-14 01:00:41 +08:00
Jason Short 81413d2a76 re-enabled relay test 2012-01-13 08:55:02 -08:00
Jason Short 09c4bbe46e Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short b9419e0123 moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short b81f9a5d77 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short b884462ce3 removed wind comp code, 
Added Landing boost code
 2012-01-12 22:28:58 -08:00
Jason Short 5418d330f6 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00
Jason Short 6d0f078fdd Added Landing throttle control to force down the copter 2012-01-12 22:28:58 -08:00
Jason Short b493cb1e55 removed unused defines 
lowered default Loiter gain
 2012-01-12 22:28:58 -08:00
Jason Short 8416de7e9c Added Ryan's GPS lag filter 
Removed unused code
refined alt change
 2012-01-12 22:28:58 -08:00
Jason Short 400d080d12 added notes 2012-01-12 22:28:58 -08:00
Andrew Tridgell f4490b62c7 DCM: prevent a segmentation fault when compass is not enabled 
when compass is disabled _compass is NULL
 2012-01-13 15:48:07 +11:00
Doug Weibel 622217357c Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
analoguedevices c00bcc58d9 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00
Jason Short 33fe4db3fc R10 2012-01-11 22:41:51 -08:00
Jason Short 464038b3ea New Loiter control 2012-01-11 22:41:51 -08:00
Jason Short 2566f1fb95 New Loiter Gains for new Loiter methods 2012-01-11 22:41:51 -08:00
Jason Short 55cb0ad476 moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short 7978a2a21a attempting to force down without using Manual boost. 2012-01-11 22:41:51 -08:00
Doug Weibel 6f9c6a3b8e Adding comments for global variables 2012-01-11 12:37:43 -07:00
Michael Oborne 2677476b91 APM Planner 1.1.20 
add ac2 land Mode
add xplane 10 support
add disconnect verify
 2012-01-12 01:33:42 +08:00
Andrew Tridgell a6e87915eb desktop: floating point precision changes from Justin Beech 2012-01-11 21:31:59 +11:00
Jason Short db1fafaaec R9 2012-01-10 23:46:08 -08:00
Jason Short 22ebe00773 comma 2012-01-10 23:45:33 -08:00
Jason Short 1e1e36e649 Tweaks 2012-01-10 23:43:44 -08:00
Jason Short f43c29e840 fixed type error 2012-01-10 23:43:44 -08:00
Jason Short ecaf5ac461 sensorSign swicth 2012-01-10 23:43:44 -08:00
Jason Short 7933492fec Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short 30f5ecda54 Fixed Type Error 2012-01-10 23:43:44 -08:00
Jason Short ed903c6cd3 Fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 36516161b5 Climb rate control 2012-01-10 23:43:44 -08:00
Jason Short 78925d57c2 added set_new_altitude call() 2012-01-10 23:43:44 -08:00
Jason Short 0c9dc11ac1 Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short 7d4067a6ed updated climb rate control 
Land detector
 2012-01-10 23:42:27 -08:00
Jason Short f683371508 added set_new_altitude call 2012-01-10 23:42:27 -08:00
Jason Short 581657ab7a climb rate control 2012-01-10 23:42:26 -08:00
Jason Short 439c15f3fc Added climb rate control 
removed unused vars
 2012-01-10 23:42:26 -08:00
Jason Short 56de5d58c5 Added altitude 2012-01-10 23:42:26 -08:00
Jason Short c385db412e Added altitude change flags 2012-01-10 23:42:26 -08:00
Jason Short d7d04f67e4 AP Rangefinder had some bad characters in it. Converted and cleaned the text files. 2012-01-10 23:42:26 -08:00
Jason Short 9cbfcac802 Made timer unsigned 2012-01-10 23:42:26 -08:00
Jason Short 9d1b1dba77 Added comments 2012-01-10 23:42:26 -08:00
Jason Short 5b00928b15 added location error calc to get better data. Otherwise we'll be 1 GPS read off. 2012-01-10 23:42:26 -08:00
Jason Short 0744179970 Added comments 
moved out failsafe check. otherwise the reporting was erroneous.
 2012-01-10 23:42:26 -08:00
Jason Short 5d28e97339 Moved failsafe check to more logical place 2012-01-10 23:42:26 -08:00
Jason Short f240888b49 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Pat Hickey 7961021895 ArduCopter motors_y6: rewrite CH_ macros with MOT_ macros 2012-01-09 22:06:49 -08:00
Pat Hickey 397aef9c2a ArduCopter motors_y6: rewrite loop in terms of motors 2012-01-09 22:06:49 -08:00
Pat Hickey 2f11c3f17a ArduCopter motors_tri: rewrite CH_ macros with MOT_ macros 
* Third Tricopter motor was on CH_4, so it is called MOT_4. This
  will be changed in a subsequent commit.
 2012-01-09 22:06:49 -08:00