Michael du Breuil
631a0bdbff
Rover: Enable scripting parameters
2019-06-18 00:06:32 -07:00
Randy Mackay
c233c3aff3
Rover: integrate OAPathPlanner
2019-06-11 13:13:22 +09:00
Peter Barker
9f97125656
Rover: stop passing references to AC_Avoid constructor
2019-05-22 07:48:02 -06:00
Patrick José Pereira
1c816b1fe1
rover: Fix parameter type capitalization
...
This parameter type is used by groundstation to create the parameter subcategory
Since this creationg is case sensitive, the capitalization should be done here.
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-05-18 08:40:56 +09:00
Peter Hall
b5782f0b7a
Rover: convert old sailboat parameters
2019-05-15 11:29:39 +09:00
Peter Hall
d5f3cf50e4
Rover: Parmeters: remove old sailboat params
2019-05-15 11:29:39 +09:00
Randy Mackay
8c034e6fa2
Rover: prepend _old to some unused param enums
2019-05-10 06:55:35 +09:00
Randy Mackay
a94ebc5bc3
Rover: integrate navigation library
2019-05-10 06:55:35 +09:00
Tom Pittenger
d1f7485e14
Rover: add STICK_MIXNG param
2019-05-03 13:14:11 -07:00
Peter Barker
d794c0fe53
Rover: add param conversion from MAG_ENABLE to COMPASS_ENABLED
2019-04-02 10:24:49 +11:00
Peter Barker
578438c178
APMrover2: move enabled parameter into compass library
2019-04-02 10:24:49 +11:00
Tom Pittenger
6f5497cac3
Rover: rename dataflash to logger
2019-03-28 16:40:57 +11:00
Michael du Breuil
1420ac868d
APMRover2: Allow scripting to run
2019-03-05 08:45:54 +11:00
Peter Barker
101ce74071
Rover: Rally no longer takes ahrs in constructor
2019-02-20 18:03:38 +11:00
Ebin
0f5041e873
Rover: added acro mode to MIS_DONE_BEHAVE
2019-02-16 13:55:17 +09:00
Ebin
e806d0c385
Rover: add param to offset balancing point for balance bots
2019-02-16 13:54:50 +09:00
Peter Barker
9496ffea14
Rover: enable gripper support
2019-02-09 11:02:22 +09:00
Randy Mackay
9067e1099f
Rover: fix LOIT_TYPE param description
2019-02-06 09:03:35 +09:00
jmachuca77
692281b273
Rover: adding AP_RPM
2019-02-05 08:32:37 -08:00
Peter Barker
bcc60fd90e
Rover: fence no longer takes reference to ahrs in constructor
2019-01-31 11:25:38 +09:00
Randy Mackay
ac773ccd79
Rover: convert ch7_option param to rc7_option
2019-01-23 20:13:50 +09:00
Peter Barker
1b6bed0d4b
Rover: adjust LOG_BITMASK description to remove APM2
2019-01-20 09:35:32 +09:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Michael du Breuil
d920795537
Rover: Reset all storage when format version is incorrect
2019-01-08 10:35:37 +11:00
Tatsuya Yamaguchi
3ff1bb7714
Rover: add ekf failsafe
2018-12-20 15:15:00 +09:00
Peter Barker
29782c3d2e
Rover: move AP_Mission object into ModeAuto class
...
This mirrors what we did for Copter
2018-12-13 13:44:46 +09:00
TsuyoshiKawamura
ba0926e101
Rover: MIS_DONE_BEHAVE parameter to choose mode after mission done
2018-11-23 15:27:58 +09:00
Tatsuya Yamaguchi
32ba248c73
Rover: add continue-in-auto option to failsafe
2018-11-14 20:24:01 +09:00
Tatsuya Yamaguchi
44360a769d
Rover: fix to use defined value of failsafe action
2018-11-14 11:18:43 +09:00
Randy Mackay
ed8feda5b9
Rover: shorten failsafe timeouts
...
radio failsafes may trigger within 1sec (previously was 2 seconds)
default failsafe set to 1.5sec (was 5sec)
also minor improvement to FS_TIMEOUT parameter description
2018-11-02 10:31:37 +09:00
Randy Mackay
2db6b7c7cb
Rover: move sailboat vars into struct
...
also fix airspeed library's parameter description
also log NaN when we do not have wind direction or speed estimates
also send timeout message to GCS when taking takes too long
2018-11-01 18:04:19 +09:00
IamPete1
0dddc2eafe
Rover: add sailboat tacking
2018-11-01 18:04:19 +09:00
IamPete1
4366bae96d
Rover: add sailboat support
2018-09-28 10:40:12 +09:00
IamPete1
100c494127
Rover: add loiter radius parameter
2018-09-28 10:40:12 +09:00
Ammarf
6ba5942ece
Rover: add simple mode
2018-09-11 16:43:17 +09:00
Randy Mackay
dd3163b065
Rover: rename AC_RALLY to AP_RALLY
2018-08-30 10:00:56 +09:00
Randy Mackay
f0ad8760e2
Rover: move rally to g2
2018-08-30 09:55:05 +09:00
Raouf
90fd64cf3a
Rover: add support for rally points
2018-08-30 09:54:51 +09:00
Thorsten Panitz
ee8d5d77d0
Rover: Activation of OSD
...
Rover: Activation of OSD
2018-08-30 08:19:02 +10:00
Randy Mackay
5aa1286344
Rover: report left and right wheel control PID
2018-08-27 16:44:33 +09:00
Randy Mackay
db611e074c
Rover: include wheel-rate-control
2018-08-27 16:44:33 +09:00
Peter Barker
ca7842afac
Rover: add support for Sprayer
2018-08-17 15:33:35 +09:00
Randy Mackay
011776bff2
Rover: restore param description for CH7_OPTION
2018-08-12 14:00:48 +09:00
Randy Mackay
b5f045dc5f
Rover: mode description in lower case
...
Follow was in upper case
INITIAL_MODE was missing SmartRTL
2018-08-12 13:41:45 +09:00
Raouf
f0185cb79b
Rover: Add loiter behaviour parameter
2018-08-08 07:17:13 +09:00
Ammarf
430ed9bd3d
Rover: add custom config support
2018-08-07 10:01:32 +09:00
Randy Mackay
e71dc9307e
Rover: add Pitch to GCS_PID_MASK param description
2018-08-06 11:30:22 +09:00
Andrew Tridgell
73ccf90087
Rover: fixed RC_Channels parameter docs
2018-08-04 12:28:38 +10:00
Lucas De Marchi
00f03360bc
APMrover2: kill AP_FEATURE_SAFETY_BUTTON
...
This is redundant and can be just HAL_HAVE_SAFETY_SWITCH.
2018-08-02 13:15:02 -07:00
Peter Barker
1f0908bba2
Rover: move handling of RC Switches into RC_Channel
...
Rover: use base-class auxsw handling
Rover: factor out do_aux_function_change_mode
Rover: move mode number enumeration to be in Mode:: namespace
Rover: move mode switch handling to RC_Channel
Rover: rename control_modes.cpp to RC_Channel.cpp
Rover: move motor_active() to be a method on the motors class
2018-08-01 12:11:30 +09:00