Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
46,581 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

46581 Commits

Author SHA1 Message Date
Iampete1 69275582fa QuadPlane: fix loiter to RTL instant QRTL switch 2021-03-03 15:07:22 +11:00
Peter Barker 5a49d98555 Tools: have decode_watchdog try to decode from .log dataflash dumps 2021-03-03 13:38:12 +11:00
Michael du Breuil f227d67d58 AP_GPS: Remove unused enum 2021-03-03 10:00:15 +09:00
Mathias Bos b3b7f2d3d2 Copter: Remove yaw rate wrapping in guided mode. 2021-03-03 08:09:08 +09:00
Randy Mackay 4c8ada111b Plane: quadplane defaults Q_WP_SPEED to 500 
Q_WP_ACCEL default is set to 100
 2021-03-03 08:03:39 +09:00
Randy Mackay a35a7e1523 Tools: autotest manual control test requires 12 deg 
adjusted down because of lower default angle_max
 2021-03-03 08:03:39 +09:00
Randy Mackay 79c9b4b523 AC_WPNav: increase default speed to 10m/s and accel to 2.5m/s/s 2021-03-03 08:03:39 +09:00
Randy Mackay 64289d436a Copter: reduce ANGLE_MAX default to 30deg 2021-03-03 08:03:39 +09:00
murata 3824277d11 AC_Fence: Add Smart RTL or LAND to the fence action 2021-03-03 07:59:03 +09:00
murata 17f285b68f Copter: Add Smart RTL or LAND to the fence action 2021-03-03 07:59:03 +09:00
Peter Barker a97786c01d RC_Channel: use RC channel options 203 and 204 for throttle and yaw 
This gives us a 200 + n mapping for the traditional AETR mapping.

Unfortunately, it will break walking robots until they update their
parameters
 2021-03-03 08:42:00 +11:00
Peter Barker 7480a2a00b GCS_MAVLink: correct output of AHRS2 mavlink message 
The || here was causing short-circuiting
 2021-03-02 20:48:36 +11:00
Peter Barker 317181922c autotest: ensure we're getting vaguely sane data in AHRS2 message 2021-03-02 20:48:36 +11:00
Peter Barker cc83562add autotest: tidy fence handling 2021-03-02 16:54:06 +11:00
Peter Barker 03bb3237ef SITL: set default RPM_TYPE to 10 for FlightAxis 2021-03-02 15:41:44 +11:00
Peter Barker b2d4cefa85 autotest: change heli default RPM type to 10 
Change default to SITL
 2021-03-02 15:41:44 +11:00
Peter Barker 4d2cf8c95b AP_Frsky_SPort: correct handling of RPM sensor data 
Nails support down to just two RPM sensors for the time being.

Simplifies things (there was an issue here when I corrected RPM-in-SITL)
 2021-03-02 15:41:44 +11:00
Peter Barker 370db00096 AP_RPM: add explicit RPM_TYPE_SITL 
Old behaviour is that anything that wasn't claimed (or failed to
allocate) would become a SITL RPM sensor.  This meant we always had at
least one RPM sensor which was allocated but never provided valid data.

New behaviour is that if you want a SITL RPM sensor you have to set type
to 10.
 2021-03-02 15:41:44 +11:00
Peter Barker eb499ff731 autotest: improve frsky SPort test 
- reduces verbosity as we only check the remaining items when new data
received
 - reduces repoll interval and explains why we need to re-poll
 2021-03-02 15:41:44 +11:00
Peter Barker 7b251b6fd4 autotest: add diagnostics for frsky tests 2021-03-02 15:41:44 +11:00
Peter Barker c059338386 AP_Frsky_Telem: use location from AHRS not GPS 
The AHRS may be able to supply information even in the absense of an
actual GPS unit.
 2021-03-02 15:41:44 +11:00
Peter Barker 2671a2f71f autotest: fix up FRSky tests for running under Valgrind 2021-03-02 15:41:44 +11:00
Peter Barker 360512f6b0 autotest: preserve commandline customisations on reboot under valgrind 2021-03-02 15:41:44 +11:00
Peter Barker fc9a93ba67 autotest: stop using mavproxy for clearing missions 2021-03-02 14:24:36 +11:00
Peter Barker 97e2596bf8 autotest: stop clearing mission at start of test 
These are implicitly cleared by the framework
 2021-03-02 14:24:36 +11:00
Peter Barker 973510a4ff autotest: push context after customising cmdline 
doing things in the other order causes problems when running the
complete suite
 2021-03-02 14:24:36 +11:00
Peter Barker 5d1e105534 autotest: allow more time for mission upload and download 
We upload some rather large missions....
 2021-03-02 14:24:36 +11:00
Peter Barker 10007e2e42 autotest: load missions natively rather than using MAVProxy 2021-03-02 14:24:36 +11:00
Peter Barker 993d87469c autotest: move mission upload functions from rover to common 2021-03-02 14:24:36 +11:00
Peter Barker 34a52e9cfe autotest: use wait_statustext in place of mavproxy.expect for autorotate test 2021-03-02 13:34:09 +11:00
Rishabh 6e2339d2d6 Tools: default parameters for Hexsoon TD-650 2021-03-02 10:13:51 +09:00
Andrew Tridgell 4fbdb59398 HAL_ChibiOS: prevent sharing the same DMA stream on TIMn_UP channels 
this avoids an issue with DShot where we run the same DMA stream on
two timers at once
 2021-03-02 11:58:38 +11:00
Andy Piper 6cb263056d AP_HAL_ChibiOS: build fix for iomcu 2021-03-02 11:58:38 +11:00
Andy Piper d0e4d510cf AP_HAL_ChibiOS: order PWM timers by DMA UP stream id to prevent deadlocks in dshot 2021-03-02 11:58:38 +11:00
Iampete1 2e9c11fbdf Copter: add FLIGHT_OPTIONS param and options bits to disable thrust loss and yaw imbalance warnings 2021-03-02 09:35:06 +09:00
Iampete1 447af29ef1 Copter: add yaw imbalance check 2021-03-02 09:35:06 +09:00
Iampete1 1d050a01ce Plane: Quadplane: add Q_OPTION to ignore forward flight angle limits in Q modes 2021-03-02 11:16:35 +11:00
Iampete1 e64a7b2884 AP_Mount: type enable flag 2021-03-02 10:09:19 +11:00
Iampete1 3306484023 AP_NavEKF2: log position offset as float in meters 2021-03-02 10:03:12 +11:00
Iampete1 8173cd442a AP_NavEKF3 log position offset as float in meters 2021-03-02 10:03:12 +11:00
Paul Riseborough 0971ef55a4 AP_NavEKF3: Fix bug preventing EKFGSF running when needed for reset 
The gpsAccuracyGood flag should not be used because it will go false if GPS innovations become high due to bad yaw which is when the EKFGSF is required. to keep running.
 2021-03-02 07:28:24 +11:00
Paul Riseborough 948650dbe5 AP_NavEKF2: Fix bug preventing EKFGSF running when needed for reset 
The gpsAccuracyGood flag should not be used because it will go false if GPS innovations become high due to bad yaw which is when the EKFGSF is required. to keep running.
 2021-03-02 07:28:24 +11:00
Peter Barker 0daa1a63d3 autotest: remove pointless fetch_parameters call 
And the entire method, replace with equivalent test
 2021-03-01 17:27:52 +11:00
nkruzan 3e0f9ab4e7 Tools:autotest\common.py fix text typo 2021-03-01 15:15:38 +11:00
Peter Barker 61138f342a autotest: do not time out receiving of heartbeat if running gdb 
pausing indefinitely when running GDB is OK.
 2021-03-01 13:44:23 +11:00
Peter Barker 1f47698076 autotest: use change_mode in place of mavproxy.send 2021-03-01 13:10:09 +11:00
Iampete1 8ebe64a274 Plane: Quadplane disable forward motor assist in Q modes if rangefinder is out of range low 2021-02-28 18:48:56 +11:00
Andrew Tridgell 97e7b48ca1 Tools: rebuild DrotekP3Pro bootloader 2021-02-28 17:24:25 +11:00
Andrew Tridgell 0528414a9c AP_Bootloader: limit the 1M flash check to the F427 
this fixes an issue with the DrotekP3Pro which uses the STM32F469
 2021-02-28 17:24:25 +11:00
Andrew Tridgell 44df1dd0ca Plane: fixed the pitch control in transition for tilt rotors 
this fixes an issue found by Henry. If level transition is set when
transitioning to FBWA from a Q mode, and the pilot pulls back on the
pitch stick to demand pitch up then the plane would go into a
high-alpha flight state with low vertical throttle so it would not
climb, resulting in it never getting past airspeed wait state
 2021-02-28 11:33:18 +11:00