Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,291 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

168 Commits

Author SHA1 Message Date
Andrew Tridgell 7359348e2c HAL_PX4: added support for /fs/microsd/APM/nostart 
prevents APM startup
 2013-01-25 20:44:36 +11:00
Andrew Tridgell 8f2f4b1bc5 HAL_PX4: use write() to /dev/pwm_output for servo output 
this lowest the cost of PWM output a lot, but relies on the new I2C
based IO firmware
 2013-01-25 20:44:36 +11:00
Andrew Tridgell f9d43f4c3e HAL_PX4: prevent loop() overruns using hrt 
this ensures if loop() takes more than 1 second, the main task gets
its priority dropped until loop() completes
 2013-01-24 15:04:57 +11:00
Andrew Tridgell 70227d5d93 HAL_PX4: added scheduler performance counters 2013-01-24 15:04:57 +11:00
Andrew Tridgell 0e79b93289 HAL_PX4: added storage performance counters 2013-01-24 15:04:57 +11:00
Andrew Tridgell fc8065b50f HAL_PX4: added UART performance counters 2013-01-24 15:04:57 +11:00
Andrew Tridgell 6cf1d5e1ff HAL_PX4: handle IO errors on microsd 
this should handle EINTR gracefully
 2013-01-24 15:04:57 +11:00
Andrew Tridgell 966b9b9b9c HAL_PX4: format panic messages with a newline 2013-01-23 16:54:44 +11:00
Andrew Tridgell c9799fb2b7 HAL_PX4: writing more than 512 bytes at a time can cause IO errors 
the vfat fs in NuttX is really very picky!
 2013-01-23 16:54:44 +11:00
Andrew Tridgell 952df2fced HAL_PX4: new buffered storeage driver for microsd cards 
this does all IO in the timer thread, avoids writes that don't change
data, and does all writes in multiples of 128 byte chunks. This should
be about as friendly to SD cards as we can get.
 2013-01-23 16:37:40 +11:00
Andrew Tridgell f72b532405 HAL_PX4: ensure all writes go via buffers 
this prevents output corruption by direct fd writes
 2013-01-23 09:22:51 +11:00
Andrew Tridgell 2a10727902 HAL_PX4: run timer thread as SCHED_FIFO 
this ensures it never yields to the main thread, which would break our
locking assumptions
 2013-01-23 09:21:50 +11:00
Andrew Tridgell 930e79a9e1 HAL_PX4: fixed rcin->valid() for RC override input 2013-01-23 07:57:59 +11:00
Andrew Tridgell 06e63d3167 HAL_PX4: use pthread_yield() in main loop 
this lowers the latency of the main loop somewhat
 2013-01-23 07:36:13 +11:00
Andrew Tridgell 6e8501603c HAL_PX4: avoid RCOutput ioctl unless values change 
this lowers latency somewhat
 2013-01-23 07:29:59 +11:00
Andrew Tridgell 89cb3fbd61 HAL_PX4: fixed blocking IO in UART driver 2013-01-22 21:52:21 +11:00
Andrew Tridgell 6ffa18fa61 HAL_PX4: rewrite UART driver to be much more efficient 
this does the IO in the timer thread, and uses buffers in the main
task to avoid system call costs in the flight code.

The cost of PX4 read and write system calls is quite high - about 10
to 15 usec. We can't afford to pay that per byte
 2013-01-22 21:22:01 +11:00
Andrew Tridgell 546ed19ffc HAL_PX4: improved efficiency of serial writes 
use buffer at a time writes when possible, and use O_NONBLOCKING to
avoid txspace()
 2013-01-22 10:50:26 +11:00
Andrew Tridgell 18cfd29f2f HAL_PX4: added a read buffer to the UART driver 
this lowers the average cost of reading bytes by a large amount, and
prevents the GPS driver from chewing lots of time.
 2013-01-22 10:34:04 +11:00
Andrew Tridgell db0bd86317 HAL_PX4: name the eeprom file after the sketch 
this makes it easier to switch between ArduPlane and ArduCopter
 2013-01-21 22:04:17 +11:00
Andrew Tridgell 1188c9e335 HAL_PX4: added Util instance 
this fixes hal.util->vsnprintf_P()
 2013-01-21 17:10:42 +11:00
Andrew Tridgell 52f560a4c2 HAL_PX4: enabled AnalogIn driver 2013-01-21 13:56:57 +11:00
Andrew Tridgell ed94292c25 HAL_PX4: start adc driver in rc.APM 2013-01-21 13:55:58 +11:00
Andrew Tridgell e42cf918fd HAL_PX4: added AnalogIn driver 
this allows airspeed to work on a PX4
 2013-01-21 13:55:06 +11:00
Andrew Tridgell 39e28d48c2 HAL_PX4: switched scheduler to use a pthread 
this allows the timer tasks to access file descriptors in the main APM
task, which makes writing PX4 device drivers much easier
 2013-01-21 13:54:09 +11:00
Andrew Tridgell ffb2924dd4 HAL_PX4: added APM startup script 2013-01-21 08:27:02 +11:00
Andrew Tridgell 0655b1a925 HAL_PX4: fixed thread_running on failed startup 2013-01-20 22:13:20 +11:00
Andrew Tridgell 76092eb590 AP_HAL: remove unused peek() interface from UART drivers 
this is a bit tricky to implement on some platforms, and is unused
anyway
 2013-01-16 14:43:18 +11:00
Andrew Tridgell bd9c61562f HAL_PX4: added -d command line option to app 
allows control of serial device
 2013-01-14 16:21:27 +11:00
Andrew Tridgell 64a8a8e4c9 HAL_PX4: fixed using mavlink on the console 
this disables the ONLCR termios flag, which was injecting extra
carriage returns in the output
 2013-01-14 16:21:27 +11:00
Andrew Tridgell 7c7a215934 HAL_PX4: fixes for new Scheduler API 2013-01-11 12:25:26 +11:00
Andrew Tridgell 5ac23d358f HAL_PX4: update for new i2cdriver interface 2013-01-07 11:05:30 +11:00
Andrew Tridgell 319e1a4e84 HAL_PX4: support setting servo rate 2013-01-07 11:05:30 +11:00
Andrew Tridgell 30447018d5 HAL_PX4: handle %S in format strings 2013-01-05 08:10:07 +11:00
Andrew Tridgell 08d518e07f HAL_PX4: switch to libc vdprintf() 
vdprintf has now been added to NuttX
 2013-01-05 08:01:10 +11:00
Andrew Tridgell 84bd10d279 HAL_PX4: minor cleanups 2013-01-04 22:27:04 +11:00
Andrew Tridgell 5829d44a22 HAL_PX4: disable failsafe handler 
this won't work until we can set RC output values in timers
 2013-01-04 22:26:16 +11:00
Andrew Tridgell 0fcc6d7389 HAL_PX4: added an RC Output driver 2013-01-04 22:25:36 +11:00
Andrew Tridgell 44837a11f2 HAL_PX4: added baudrate support to UART driver 2013-01-04 19:42:30 +11:00
Andrew Tridgell 965fc8a9d1 HAL_PX4: enable uartB as GPS port 2013-01-04 19:41:50 +11:00
Andrew Tridgell 9f423a24ad HAL_PX4: yield CPU in delay() 
this allows other apps to run
 2013-01-04 12:34:35 +11:00
Andrew Tridgell 155fca8a4b HAL_PX4: make APM sketches into daemons 
this also moves uartA onto UART5, allowing ttyS0 for nsh
 2013-01-04 11:14:35 +11:00
Andrew Tridgell 1fc95a2d45 HAL_PX4: support PPM RC Input 
HIL flying now works properly
 2013-01-04 08:31:23 +11:00
Andrew Tridgell 38bccee230 HAL_PX4: initial RCInput driver (overrides only) 2013-01-03 21:30:35 +11:00
Andrew Tridgell d492b72a2c HAL_PX4: use /dev/ttyS0 for uartA 
this also changes txspace and available to use FIONWRITE and FIONREAD
 2013-01-03 21:12:10 +11:00
Andrew Tridgell 1e69b88261 HAL_PX4: use write() in panic() 
this allows panic from the UARTDriver
 2013-01-03 21:11:37 +11:00
Andrew Tridgell ac7117245a HAL_PX4: added a storage driver 
stores 'eeprom' to a sdcard file
 2013-01-03 19:35:05 +11:00
Andrew Tridgell b30fa6535b HAL_PX4: support reboot 2013-01-03 19:34:36 +11:00
Andrew Tridgell c6c336a6e8 HAL_PX4: implement peek() and available() 
keep a 1 byte buffer
 2013-01-03 17:27:53 +11:00
Andrew Tridgell cc7f4353b4 HAL_PX4: update simple example 2013-01-03 13:17:32 +11:00
Andrew Tridgell b0f1ceb76b HAL_PX4: removed some files not needed any more 2013-01-03 13:17:11 +11:00
Andrew Tridgell d9d5eb52bf HAL_PX4: use fd IO instead of stdio 
this allows for hal console output from within timers, which is very
handy for debugging
 2013-01-03 13:16:41 +11:00
Andrew Tridgell c6305b5876 HAL_PX4: rework Scheduler using hrt calls 
thanks to Julian Oes for the suggestion
 2013-01-03 13:15:57 +11:00
Andrew Tridgell 9373a4e5b3 HAL_PX4: added a uartA driver 
uses stdin/stdout for IO
 2013-01-03 11:03:05 +11:00
Andrew Tridgell 5053fb8acc HAL_PX4: implement atomic operations 2013-01-02 21:45:17 +11:00
Andrew Tridgell 5a70f3becf HAL_PX4: added a scheduler implementation 2013-01-02 21:39:26 +11:00
Andrew Tridgell 374af1cd14 build: change from Arduino.mk to apm.mk 2013-01-02 17:29:37 +11:00
Andrew Tridgell da10e68e87 HAL_PX4: added basic console driver (output only) 2013-01-01 18:19:18 +11:00
Andrew Tridgell b41440175f HAL_PX4: started on new PX4 HAL structures 2012-12-30 20:02:45 +11:00
Andrew Tridgell feb11f0bc9 PX4: mark example as nobuild for now 2012-12-22 14:40:10 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell 7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Andrew Tridgell c4d9b5e328 AP_HAL_PX4: added stdio.h 2012-12-20 14:51:29 +11:00
Andrew Tridgell 2669c33476 AP_HAL_PX4: added main program as include 2012-12-20 14:51:29 +11:00
Pat Hickey be00b2f681 AP_HAL_PX4: brief disclaimer 2012-12-20 14:51:28 +11:00
Pat Hickey 64a79f3598 AP_HAL_PX4: Stub Console implemented 2012-12-20 14:51:28 +11:00
Pat Hickey 2d363e0683 AP_HAL_PX4: trivial console header 2012-12-20 14:51:28 +11:00
Andrew Tridgell 471d672e54 examples: mark some examples as unable to build 
some are not worth fixing. Some can't build on 1280/2560
 2012-11-24 21:09:55 +11:00