Commit Graph

5638 Commits

Author SHA1 Message Date
Andrew Tridgell a6422be8fb APM: added mtk and mtk16 build targets
useful for testing non-auto gps detection
2012-09-08 12:43:36 +10:00
Andrew Tridgell f26b9ab286 APM: prevent crosstrack from takeoff point after takeoff completion 2012-09-08 11:37:14 +10:00
Andrew Tridgell dec12c7370 APM: use ahrs.airspeed_estimate() in two more places
this applies the wind constraint
2012-09-08 11:37:11 +10:00
Andrew Tridgell de28cc8b28 AHRS: added AHRS_WIND_MAX option
this allows APM to cope better with airspeed sensor failure, but
ensuring airspeed stays within AHRS_WIND_MAX of ground speed
2012-09-08 11:37:07 +10:00
Andrew Tridgell 8458607928 APM_OBC: changed termination servo values, and added loop counter 2012-09-08 11:37:00 +10:00
Andrew Tridgell cde7d8c5e7 APM: fixed some compiler warnings 2012-09-08 10:14:32 +10:00
Andrew Tridgell d07d42403e APM: tidy up an if() statement 2012-09-08 10:14:20 +10:00
Andrew Tridgell fa84ba451a APM_OBM: Failsafe board sketch
this combines with the OBC failsafe module
2012-09-08 10:07:17 +10:00
Andrew Tridgell cca04d195a APM_OBC: handle separate terminate pin correctly 2012-09-08 10:07:14 +10:00
Andrew Tridgell 13145e4c01 OBC: added FS_TERM_PIN option
this sets a pin for flight termination
2012-09-08 10:07:08 +10:00
Andrew Tridgell 164c60d25f APM: added RUDDER_STEER option
when enabled, this uses only the rudder to steer during takeoff and
landing, using aileron only for levelling
2012-09-08 10:07:03 +10:00
Andrew Tridgell 130b26e1f9 APM: support DO_SET_SERVO command 2012-09-08 10:06:53 +10:00
Andrew Tridgell 96ea350143 APM: added XTRK_MIN_DIST option
this allows you to disable crosstrack correction on short legs
2012-09-08 10:06:44 +10:00
Andrew Tridgell a446a7a9ed APM: allow serial buffer size to be configured
very useful for packet forwarding setups
2012-09-08 10:06:35 +10:00
Andrew Tridgell 3a1ff7bdd9 Mavlink: enable MAVLINK_SEPARATE_HELPERS
this fixes a seq number problem with SIMSTATE packets
2012-09-08 10:06:19 +10:00
Andrew Tridgell 9b2ad55773 APM: added forwarding of unknown MAVLink types 2012-09-08 10:06:15 +10:00
Andrew Tridgell f97104b435 ACM: use compass.accumulate() in ArduCopter
this gives us a much less noisy magnetometer
2012-09-08 10:06:04 +10:00
Andrew Tridgell 68705fe7e6 APM: accumulate mag readings during spare cycles in ArduPlane
With this change we average over 100 mag readings per compass.read()
call, which means we are reading the compass at over 1kHz instead of
10Hz. The noise reduction is huge.
2012-09-08 10:05:58 +10:00
Andrew Tridgell 6922dcdea2 Compass: added compass.accumulate() API
this allows us to accumulate mag readings using spare CPU cycles
2012-09-08 10:05:54 +10:00
Michael Oborne cd08420c3e AP fix takeoff alt issue
issue 733
2012-09-06 20:19:12 +08:00
Michael Oborne c1235c55d5 Fix Approach Altitude min 2012-09-06 17:43:58 +08:00
Pat Hickey b02340fe10 APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
Michael Oborne 864d777856 Mission Planner 1.2.11
Fix ac crosstrack display
tweak ap_mount
speed up Terminal
2012-09-04 06:46:56 +08:00
Michael Oborne d3e5746993 firmware build 2012-09-02 13:34:03 +08:00
Michael Oborne 38942a1ea6 firmware build 2012-09-02 13:05:33 +08:00
rmackay9 5073e56c06 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9 c9d34c1737 ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2.
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
2012-09-02 12:51:23 +09:00
rmackay9 9013d9be43 ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
rmackay9 5994117f6f RC_Channel_aux: bug fix which could cause channel to be assigned to the wrong function and miss others 2012-09-02 12:46:04 +09:00
Michael Oborne 6501310745 firmware build 2012-09-01 20:10:02 +08:00
Craig Elder 274b2e2143 Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Michael Oborne f4334c9aaf Mission Planner 1.2.10
add useritems to HUD
change hdop scale
fix posible follow me bug (, vs .)
fix posible friendly params bug (, vs .)
tweak flightdata log playback timming
fix gridv2 bug. if no waypoint had been done, the grid wold fail
tweak some mission upload potential issues
add ability to get param list from a log (from startup)
add ability to get the first wp list in a log, if wps where received in that log.
tweak video capture library timing
2012-08-30 20:51:29 +08:00
Andrew Tridgell 83153eebd4 APM: obey pitch limits in FBWA as well
this means pitch limits are constrained by LIM_PITCH_MIN and
LIM_PITCH_MAX
2012-08-30 20:15:42 +10:00
Andrew Tridgell 9a987ce116 APM: fixed docs for LIM_PITCH_MIN 2012-08-30 14:55:08 +10:00
Michael Oborne 1e7adac365 AP fix attitude hil.
we where waiting on new_data that had no way of getting there.
2012-08-30 07:54:20 +08:00
Andrew Tridgell 97aa98015d Rover: added TELEM_DELAY to rover code 2012-08-30 09:36:18 +10:00
Andrew Tridgell e8d928cca4 ACM: added TELEM_DELAY to ArduCopter 2012-08-30 09:03:01 +10:00
Andrew Tridgell f6c3197cd2 APM: added new TELEM_DELAY parameter
number of seconds to delay telemetry
2012-08-30 08:59:39 +10:00
Andrew Tridgell a9af6e95cb APM: higher throttle on takeoff in ArduPlane autotest 2012-08-30 07:37:26 +10:00
Andrew Tridgell 681e67201d APM: fixed orientation on runway in autotest 2012-08-29 17:17:38 +10:00
Jason Short 51969dca22 ACM Log.pde : whitespace clean up 2012-08-28 21:22:07 -07:00
Jason Short 082913efd4 ACM : revert back to the 2.6 climb rate calc
The current filter is outputting wild oscillations.
2012-08-28 21:22:07 -07:00
Jason Short 0443815cb3 Mission Planner: Update XML for 2.7.2 2012-08-28 21:22:07 -07:00
Andrew Tridgell d5b218c80b SITL: use AP_Declination code to get right compass dec for autotest 2012-08-29 13:33:01 +10:00
Craig Elder 4ad516c445 Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Arduplane:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
2012-08-28 20:09:10 -07:00
rmackay9 2ad6dcb7c4 ArduCopter: increased Stabilize Roll and Pitch I term to 0.05 (was 0.01) based on feedback from Jason 2012-08-29 11:34:53 +09:00
Craig Elder d8a2bfb9e8 Arducopter: Preparing for 2.7.2 Release 2012-08-28 18:30:41 -07:00
Pat Hickey 7b3009a238 APM_RC_APM1.cpp: Bugfix on mapping of SetFastOutputChannels to ICR reg
* Previously had the ICR register for ch1/2/9 (on timer5) swapped with
  ch3/4/10 (on timer1).
* This bug probably didn't make a difference in operation since
  SetFastOutputChannels is typically only used for copters, where at
  least CH1,2,3,4 would be set to fast all at once.
2012-08-28 17:12:41 -07:00
Jason Short fd4bc69d77 ACM : Logging updates 2012-08-28 15:40:08 -07:00
Jason Short 9d64bea2ef ACM: Altitude Adjust 2012-08-28 15:40:08 -07:00