Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
19,399 Commits 70 Branches 507 Tags 619 MiB
Commit Graph

19399 Commits

Author SHA1 Message Date
Andrew Tridgell 6cf5e582b9 AP_Common: fixed examples build 2015-11-16 07:58:13 +11:00
Andrew Tridgell d43ef07f98 autotest: switched examples build to navio 
apm2 no longer supported. Navio provides good coverage of the code for
example builds
 2015-11-16 07:57:57 +11:00
Michael Oborne 2f49fa1531 AP_GPS_GSOF: add second comport to base config 2015-11-15 14:56:49 +08:00
Andrew Tridgell 1a033f3b73 HAL_Linux: don't flood the link with errors on uninitialised perf counter 
that could bring down the vehicle
 2015-11-14 14:44:29 +11:00
Julien BERAUD 2f610a400a AP_HAL_Linux: fix perf 
Fix warning (warning: declaration of 'perf_count' shadows a member of 'this')
and check that perf is not NULL before indirection
 2015-11-14 14:44:29 +11:00
Julien BERAUD 259f5f07e8 AP_NavEKF_core: fix init of perf 
_perf_FuseOptFlow  was used and not allocated
 2015-11-14 14:44:29 +11:00
Randy Mackay 05246ea0c7 Copter: fix RTL compile error when rally disabled 
Thanks to derekxm for finding this
 2015-11-14 12:39:23 +09:00
Randy Mackay 731c44d053 Copter: allow terrain to be excluded from build 2015-11-14 12:38:47 +09:00
Robert Lefebvre 2b111c2bd6 Copter: fix Helicopter no-build issue 
Conflict with another recent change to disarm counter
 2015-11-14 10:32:58 +09:00
Julien BERAUD f8f2833c88 AP_HAL_Linux: use I2C_SLAVE_FORCE in case of error 
When there is already a driver registered on an i2c bus, the I2C_SLAVE ioctl
returns an error.
When it happens, it is better to display a warning and try to force the address.
It is especially useful on the bebop when killing the regular autopilot that uses
iio drivers to access the imu because else we would need to manually unbind the
driver in an init procedure.

I have added a warning because this error can also be resulting of another cause.
If the error is not EBUSY, then panic

If the I2C_SLAVE_FORCE ioctl fails then we panic because one of the i2c devices
won't be working properly.
 2015-11-13 21:20:13 +11:00
Andrew Tridgell 9214b85cf1 Copter: fixed path for AC_InputManager for heli 2015-11-13 13:49:25 +11:00
Andrew Tridgell cefb32566f GCS_MAVLink: fixed corner case in MAVLink routing 
when a GCS sends a command to a system ID that isn't our system ID,
the GCS may use a non-advertised component ID such as
MAV_COMP_ID_SYSTEM_CONTROL. Those packets should be fowarded to the
target system even though the target system has not specifically
advertised that target sysid/compid tuple.
 2015-11-13 13:38:53 +11:00
Fredrik Hedberg a6d2e0d4df Copter: Don't auto-disarm helicopters if rotor is still spinning. 2015-11-13 11:17:43 +09:00
José Roberto de Souza 5ff67a41a1 AP_HAL_Linux: Implement perf API 
Initial implementation of perf API on Linux, for now just saving
perf data, in a further patch this data will be exported.
 2015-11-13 12:16:19 +11:00
Julien BERAUD bf5ac43142 mk: build the bebop statically 
The toolchains aren't compatible and the size of the binary doesn't get too
big with the static flag so it avoids creating a chroot.
 2015-11-13 12:15:36 +11:00
mirkix f00d4f0b3e AP_HAL_Linux: Improve loading firmware 2015-11-12 21:25:17 +01:00
Robert Lefebvre 4f7246c432 SITL: Helicopter parameter updates 2015-11-12 19:37:38 +09:00
Robert Lefebvre b89b0d7f9e AP_MotorsHeli_Single: Move Servo_Test static variables to be class members 2015-11-12 19:37:37 +09:00
Robert Lefebvre 02b8dd5ffd Copter: Heli to set hover roll trim scalar 2015-11-12 19:37:36 +09:00
Robert Lefebvre 1bc13fb9c0 AC_AttitudeControl_Heli: Add Hover Roll Trim Scalar 2015-11-12 19:37:35 +09:00
Robert Lefebvre bb7f8c1999 AP_MotorsHeli: Create Servo Test functionality 2015-11-12 19:37:34 +09:00
Robert Lefebvre eeb544d098 AP_MotorsHeli: Create SV_MAN=5=Oscillate servo setup mode. 2015-11-12 19:37:33 +09:00
Robert Lefebvre 4443ca9602 AP_MotorsHeli: Yaw servo to move when using SV_MAN param for setup. 2015-11-12 19:37:32 +09:00
Robert Lefebvre c2dff8749e AP_MotorsHeli: Change SV_MAN=2=Center to output _col_mid_pwm instead of 0 collective 2015-11-12 19:37:31 +09:00
Fredrik Hedberg 212eb85ff2 AP_MotorsHeli: Add min and max collective to manual servo modes 2015-11-12 19:37:30 +09:00
Robert Lefebvre 22729e6927 AP_MotorsHeli: Change servo manual #defines into enum 2015-11-12 19:37:29 +09:00
Robert Lefebvre 750728fa1e AP_MotorsHeli_Single: Add motor enable aux output functionality 2015-11-12 19:37:28 +09:00
Robert Lefebvre 58e918341d RC_Channel: Add motor_run_enable aux function 2015-11-12 19:37:27 +09:00
Robert Lefebvre 0b33ef3862 AC_AttitudeControl: Add Hover Roll Trim functionality for helicopters. 2015-11-12 19:37:26 +09:00
Fredrik Hedberg 5fd7fe3e53 AP_Motors: Add manual servo override to center swash-plate for set-up in AP_MotorsHeli. 2015-11-12 19:37:25 +09:00
Jolyon Saunders ca28a49fa6 AP_Motors: Circular swash-plate limits for AP_MotorsHeli 2015-11-12 19:37:24 +09:00
Robert Lefebvre 5cc4f41d85 Copter: Helicopter: to use new Stab_Col and Acro_Col functions. 2015-11-12 19:37:23 +09:00
Robert Lefebvre 34fb600c4f Copter: Utilize Input Manager Class 2015-11-12 19:37:22 +09:00
Robert Lefebvre afcc304cbf AC_InputManager: Initial class creation 2015-11-12 19:37:21 +09:00
Robert Lefebvre c66af9b788 AC_HELI_PID: Add Leak-Min param and functionality. 2015-11-12 19:37:20 +09:00
Robert Lefebvre 62864c9e2b AC_AttitudeControl_Heli: Remove commented out Cyclic Cross-Coupling code. Will resurrect in future. 2015-11-12 19:37:19 +09:00
Robert Lefebvre b8ce23970d AC_AttitudeControl_Heli: Implement Pirouette Compensation 2015-11-12 19:37:18 +09:00
Robert Lefebvre f39ac7c900 AC_AttitudeControl_Heli: Add initialization of _flags_heli members 2015-11-12 19:37:17 +09:00
Robert Lefebvre 7ad623dc70 Copter: Helicopter, fix so servos move after arming in Acro and Stabilize. 2015-11-12 19:37:16 +09:00
Robert Lefebvre 2632a2e348 Copter: Rework arming proceedures for interlock/Estop 
to fix race condition.
 2015-11-12 19:37:15 +09:00
Caio Marcelo de Oliveira Filho 8630df00b3 build: disable warnings for unused params for FLYMAPLE 
Other boards disable it, so the common code contains a lot of unused
parameters already. Use -Wno-unused-parameter to reduce the "noise".
 2015-11-12 21:22:32 +11:00
Paul Riseborough 6522fb2621 AP_NavEKF2: Allow user to relax pre-flight GPS checks 2015-11-12 20:39:15 +11:00
Randy Mackay d13b4c2dc3 AC_PrecLand: init members to resolve compile warning 2015-11-12 14:43:38 +09:00
Randy Mackay 175f5654c1 AC_PrecLand: fix backend compile error 2015-11-12 14:42:44 +09:00
Peter Barker fc05ad81eb DataFlash_File: cache oldest log to avoid directory scans when downloading 2015-11-12 12:23:46 +11:00
Paul Riseborough 0b653bb82b AP_NavEKF2: Update MAVLnk parameter documentation 2015-11-11 15:16:36 +11:00
José Roberto de Souza 17e105640e AP_InertialSensor: Add HAL_COMPASS_AK8963_MPU9250_I2C to _detect_backends() 2015-11-11 14:29:07 +11:00
José Roberto de Souza 6ece4d60aa AP_HAL: HAL_COMPASS_AK8963_MPU9250_I2C to the supported list 2015-11-11 14:29:07 +11:00
José Roberto de Souza bdc36349b4 AP_Compass: AK8963: Add support to use a AK8963 behind of a MPU9250 over I2C 
To be able to use AK8963 connected to the auxiliary I2C bus of a
MPU9250 we need first initialize it.
 2015-11-11 14:29:07 +11:00
José Roberto de Souza d1ff4286c2 AP_InertialSensor: Make detect_backends() public 
This method will be used to initialize and configure I2C backends that
have an auxiliary I2C bus that can be connected to the main I2C bus,
like MPU6000 and MPU9250.
 2015-11-11 14:29:07 +11:00