Randy Mackay
18d3907928
TradHeli: use refs for all RC_Channels
2014-02-15 05:27:49 +11:00
Randy Mackay
80ec61f217
TradHeli: make accessor methods const
2014-02-15 05:27:43 +11:00
Randy Mackay
1426078cdb
TradHeli: disable aux channels 7 and 8
2014-02-07 22:04:23 +09:00
Robert Lefebvre
d441354961
TradHeli: Minor change to two param defaults
...
Also one param name in the code clarified.
2014-01-10 10:52:17 +09:00
Randy Mackay
7233a567fb
TradHeli: add accessor for phase_angle
2013-11-15 22:58:41 +09:00
Randy Mackay
c9c803ffd4
TradHeli: move STAB_COL_MIN to main parameter list
2013-11-15 22:58:32 +09:00
Randy Mackay
b71c6bfd76
TradHeli: add RSC_RUNUP_TIME param and rotor speed estimate
2013-11-15 22:58:29 +09:00
Randy Mackay
bc4dba0eea
TradHeli: ext gyro gain range 0 to 1000
2013-11-15 22:58:26 +09:00
Randy Mackay
197fc67897
TradHeli: move pilot desired rotor speed to heli.pde
2013-11-15 22:58:24 +09:00
Randy Mackay
942c14258b
TradHeli: ramp up changes
...
Rewrote tail and main rotor ramp up methods
Moved direct drive ESC speed control into rsc_control method
Pass in ch7 servo as servo_aux to TradHeli motors object constructor
split CH7_SETPOINT parameter into GYR_GAIN and DIRECTDRIVE parameters
replaced RSC_RATE with uint8_t RSC_RAMP_TIME parameter
rename GOV_SETPOINT parameter to RSC_SETPOINT
RSC_MODE parameter description updated to indicate it controls the
source of main rotor speed
2013-11-15 22:58:13 +09:00
Robert Lefebvre
9ae66c1773
TradHeli: add support for drive tail rotors
...
Repurposed external gyro and made it multi-funcitonal.
required PWM on Ch8 to start the motor in RSC Mode moved up from 100 to 400. This is to facilitate two-stage switching of the motors with PWM>100 starting the tail motor, and PWM>400 starting the main motor.
Additional amendments by Randy
2013-11-15 22:58:04 +09:00
Randy Mackay
7ae0d3320b
TradHeli: add landing collective min
2013-11-15 22:57:58 +09:00
Randy Mackay
1f65bb537f
TradHeli: add get_pilot_desired_collective
...
Perhaps this should be moved to the main code's heli.pde sketch
2013-11-15 22:57:51 +09:00
Randy Mackay
13a412ee21
TradHeli: make parameters and variables private
...
add accessors for variables and params required in main code
replace tabs with spaces
2013-11-15 22:57:41 +09:00
Randy Mackay
2cc48ffcd6
Copter: formatting and param description changes
2013-11-15 22:57:37 +09:00
Robert Lefebvre
c812d07993
TradHeli: Creating motor_runup_complete bool which is to confirm that the heli motor is running. This will be used for advanced features in the future.
2013-07-19 16:16:08 +09:00
Andrew Tridgell
81f7ae9108
AP_Motors: fixed indent-tabs-mode
2013-05-30 09:51:34 +10:00
Randy Mackay
bd07b1e57b
ACMotors: remove unused get_num_motors function
...
Saves about 4 bytes of RAM
2013-05-14 17:35:27 +09:00
Randy Mackay
1a7cffefe6
TradHeli: change coll_out to int16_t
...
was incorrectly defined as an AP_Int16 parameter
2013-04-24 11:32:26 +09:00
Andrew Tridgell
f91ddf5df9
AP_Motors: removed board type define
2013-01-02 15:27:58 +11:00
Andrew Tridgell
7582c882e6
Motors: updates for new AP_Param API
2012-12-20 14:51:39 +11:00
Pat Hickey
c6fe5e5340
AP_Motors: ported to AP_HAL
2012-12-20 14:51:26 +11:00
Robert Lefebvre
0eb57bf93d
ACM: TradHeli
...
Fix to make update_throttle_cruise work with stab_throttle scaling.
2012-12-08 15:12:39 -05:00
Robert Lefebvre
6b1fee767a
ACM: TradHeli
...
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
2012-11-26 19:37:20 -05:00
rmackay9
9e66b555cb
ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library
2012-09-13 21:31:13 +09:00
uncrustify
744ad19630
uncrustify libraries/AP_Motors/AP_MotorsHeli.h
2012-08-21 19:19:52 -07:00
Robert Lefebvre
575b99b4be
TradHeli: Creating Flybar Acro mode.
2012-08-21 16:54:01 -04:00
Robert Lefebvre
bf6c934c32
Changing TradHeli param motors.acro_mode to motors.flybar_mode to better reflect it's intent.
2012-08-20 23:13:50 -04:00
Robert Lefebvre
e6b5af7143
Adding new Trad Heli parameters.
2012-08-20 16:45:19 -04:00
Andrew Tridgell
518d6365ff
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Robert Lefebvre
df17ff3bc1
AP_MotorsHeli Syntax correction.
2012-06-04 15:53:07 -04:00
rmackay9
c82a403b88
AP_MotorsHeli: Added reference to "Arduino.h" to allow autotest builder to work.
...
Moved around initialisation of parmeters in AP_MotorHeli object to remove compiler warnings.
2012-06-02 16:13:23 +09:00
Robert Lefebvre
5f058fb9b2
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
rmackay9
7a8973eaf0
AP_MotorsHeli - fixed compiler warning re move_swash function declared with int parameters in .h file but actually using int16_t in .cpp file. They're the same in arduino but perhaps the build checker is a little more strict that Arduino.
2012-04-05 00:06:33 +09:00
rmackay9
b71877366e
ArduCopter - AP_Motors library - added new library which has few advantages over current code:
...
1. it's step towards rearchitecting the current code base ahead of a move to RTOS.
2. internally it uses a MatrixTable for the Quad, Octa, OctaQuad, Y6 frames.
3. it implements the missing stability patch for Octa and OctaQuads (still missing for Y6)
Later check-ins will incorporate into the main ArduCopter code.
2012-04-02 17:26:37 +09:00